I ordered similar kit through Dasa racing. Good work 💪🏼
@codyburrows61605 ай бұрын
Do you know what the ID and OD of the new breather hoses are?
@bikelifewithalex1206 ай бұрын
Black Panda looking good, thats what popped into mind when I saw her.
@daniel5x5x5estrada57 ай бұрын
No check engine light on?
@YFZ4fiddy9 ай бұрын
Just as a heads up, that fuel plug splits apart. The blue portion goes into the fuel line and the remaining black piece caps the tip on the tank itself.
@h2beezy29 ай бұрын
does AIS delete cause engine light?
@giangonzalez801 Жыл бұрын
What the AIS removal help with? Or what does it do?
@dodgecumminsguy94993 ай бұрын
Clears up the emissions
@luisillo1765 Жыл бұрын
does it come with the plastic chainslide piece
@MrDelgadoHD Жыл бұрын
@atvsteez2236 did you ever flip your heat shields? I put mine on backwards just like that when I installed my Yoshi lol
@paulhood7373 Жыл бұрын
Did the exhaust come with spark arrestor or quiet core?
@mchevownr Жыл бұрын
Such an awesome instructional video sir! Great lighting and video angles to see what you’re working on! Music was a little loud at times. The fci intake, did you need to adjust the throttle body angle to get the intake tube and seal to fully seat? I’m ordering the exact same products! My OEM throttle body is angled to the left side of the bike making the angle steep for aftermarket intakes. If you had this issue, how did you overcome this issue?
@mchevownr Жыл бұрын
Hello! Also, did your coolant hose closest to the header need adjustment? I thought mine had enough clearance, but it touched while startup and warmup and melted on the header. Luckily I stopped the engine and put a fan on it to keep it from total failure. Oh well, now need new silicone blue hoses. Lol
@mchevownr Жыл бұрын
Awesome video! What was the torque value for the rear swing arm skid plate?
@austincarver1036 Жыл бұрын
Will the same apply to a 2023 SE?
@dustinrichards8401 Жыл бұрын
How’d you get your exhaust that mirror look on the silencer
@atvsteez2236 Жыл бұрын
The YOSHI RS2 comes like that but I did rub it down with some alcohol wipes before firing it up so it doesn’t leave any grease/discoloration stuck on it! Love this exhaust system ☝️
@John-vf9py Жыл бұрын
Why do all these good videos overlay horrible music that literally drowns out the instructions? Music is just distracting and terrible to say the least
@richardmacias4463 Жыл бұрын
Hey did urs comes with a rubber hose and fitting that goes right under the intake tube? If so did you cap it off?
@atvsteez2236 Жыл бұрын
I’m not 100% sure what you’re asking. Break it down for me
@Davido50 Жыл бұрын
Can't beat these machines! Best sport quads out there. Well worth the $. - Ohio
@kawz3854 Жыл бұрын
an ltr with a few mods can compete hard with these new yfz
@pollito_karo7886 Жыл бұрын
definitely... love mine
@jesse1136 Жыл бұрын
Technically the only pure sport quads out there, at least from the standpoint of what's got a current model, fully supported by the mfg and presently in production.
@Davido50 Жыл бұрын
@kawz3854 Yes for sure but you don't need ANY mods on a new YFZ450R & it's still avail new! -Ohio
@Davido50 Жыл бұрын
@@jesse1136 Grab a new one while ya still can! They will be crazy desirable when Yamaha stops building em. Facts. -Ohio
@raptor700life3 Жыл бұрын
Best Video I seen yet about the YFZ450
@atvsteez2236 Жыл бұрын
Thank you my friend! I tried to give some insight the best way possible when doing the big 3 + AIS delete
@raptor700life3 Жыл бұрын
@@atvsteez2236 no problem bruh do you have IG that I can message you on
@jasonskanchy7113 Жыл бұрын
Great video. I pretty much have the same setup. What vortex settings would you suggest? Currently I'm running map 5. 6,6,7. Thanks
@atvsteez2236 Жыл бұрын
I run MAP 9: 5,6,6 for low medium high in that order.. It runs like a dream on these settings for me ✔️
@erre6914 Жыл бұрын
PEAK RACING PRODUCTS VORTEX MOUNT
@atvsteez2236 Жыл бұрын
Yeah, I ordered the Mount with all the products in this video, however, they were back ordered by Peak racing. I have it now, and will be putting it on for sure! PEAK RACING is awesome. ✔️
@erre6914 Жыл бұрын
@@atvsteez2236 yeah the owner is an awesome guy. AND TRUST ME DO THE NON SLIPPER BASKET OR U RISK DAMAGING THE ENGINE CASE WHEN IT BLOWS. 09R basket + 09r thrust washer + 09r clutch components and a decent vortex tune and ur good to go. I RECOMMEND THE PRO X clutch fibers and steels. THEY GRAB AND GRAB HARD NO SLIPPAGE.
@erre69142 жыл бұрын
Needs a 2009 yfz450r clutch convert or basket going to explode and leave you stranded.
@atvsteez2236 Жыл бұрын
100% will be installing
@yahirbarragan66302 жыл бұрын
You change the clutch basket or are you not cause I heard it’s a ticking time bomb 😅 I don’t have one but people are saying to get one
@atvsteez22362 жыл бұрын
Yup I’ll be doing the clutch basket for sure! When I do I’ll post it up, probably in the spring.
@yahirbarragan66302 жыл бұрын
@@atvsteez2236 not sure if I should get one my bike is really new and only ride like 3 weeks straight in December only
@dustinrichards84012 жыл бұрын
Any idea on how much hp you got now?
@atvsteez22362 жыл бұрын
I don’t know and I’ve never had it Dynoed, but one thing for sure is IT RIPS 🔥
@Ваня-э1ш2 жыл бұрын
Продаи.квадрик
@RR319822 жыл бұрын
Nice job, doesn’t look extremely hard. Thanks for sharing 👍
@atvsteez22362 жыл бұрын
Thanks Ronaldo, yea it’s just a little time consuming but a MUST and knowing what needs to be removed and what needs to go where.. Bike runs absolutely flawless with this setup. So fast 💨 But better yet no bog and instant throttle response 🙏✔️💯
@RR319822 жыл бұрын
@@atvsteez2236 I don’t have mine yet but soon and I’ll be referring back to your video to do my install, thanks again my friend 👍👌🇺🇸
@santinopontera11522 жыл бұрын
Let me know when you do and if you do a give away would love you quad hade a Yfz 450 2013
@joaobaiao16222 жыл бұрын
Hello, I also have a vortex ecu, fci, cams, hgs exhaust with powerbomb , ais delete, what vortex configuration can I use?
@atvsteez22362 жыл бұрын
There is a ton of variables, like where you live (elevation), gas etc. Best advice I can give you is to ask YFZ CENTRAL, join the community and they can help dial you in brother 👍
@Davido502 жыл бұрын
Yamaha sport quads #1 👍💯
@atvsteez2236 Жыл бұрын
The best!
@Mr.1-OAK2 жыл бұрын
👌👌👌
@xopepa19782 жыл бұрын
do u have to tune or could i just run fci and full exhaust
@atvsteez22362 жыл бұрын
TBH man you can probably get away with just your aftermarket intake/exhaust..However, you will thank yourself later if you get a Vortex as well. It literally has every programmable setting under the sun and you’ll find the bike runs better with it ten-fold.. that’s why it’s so expensive.
@xopepa19782 жыл бұрын
@@atvsteez2236 but with the vortex who would set it up for me i dont know how all that works, and what is ten fold?
@staysweaty89122 жыл бұрын
@@xopepa1978 I bought mine from Duncan racing and they were extremely helpful on how to set it up and answer any questions. It’s not bad you got this bud!
@yahirbarragan66302 жыл бұрын
Where you plug in the hose the intake cone with
@atvsteez22362 жыл бұрын
What’s the question your asking brotha?
@yahirbarragan66302 жыл бұрын
@@atvsteez2236 I’m asking that the intake fuel custom you know right it came with a whose but you did a ais delete so how did you plug the whole in .
@atvsteez22362 жыл бұрын
@@yahirbarragan6630 go to 12:20 and see if that helps. It’s the air sensor that screws into the FCI
@oldairpaz72982 жыл бұрын
@@atvsteez2236 the hose in the bottom of the intake*
@yahirbarragan66302 жыл бұрын
Yo bro just got the fuel custom intake but what’s the hoes it comes with for
@Fox250R2 жыл бұрын
Where did you find your red hose?
@atvsteez22362 жыл бұрын
I love Rocky Mountain, they’ve always been on point and ship very quickly. Here’s the link, well worth the $99 www.rockymountainatvmc.com/parts/cv4-radiator-hose-kit-p
@atvsteez22362 жыл бұрын
CV4 Hoses
@OdysseyOffroad2 жыл бұрын
Good choices, I have the yoshi on my Raptor. Zero regrets. Unmatched quality.
@atvsteez22362 жыл бұрын
Heck yea brother, can’t complain with a Yoshi Pipe 👌
@Davido502 жыл бұрын
Run good cycle full synthetic 10w40 oil after break in !
@Fox250R2 жыл бұрын
I just got a R5 FCI and vortex! My header glows like Hunter Biden’s crack pipe….
@jodycarter48372 жыл бұрын
🤔 Must be a Trump supporter Smh
@Fox250R2 жыл бұрын
@@jodycarter4837 Just because I hate Biden and how he’s ruined this country automatically I’m a Trump supporter? You’re a clown.
@atvsteez22362 жыл бұрын
Lmao 🤣
@atvsteez22362 жыл бұрын
I wasn’t getting a rossier or dasa where I ride.. And theres alot of tracks that have decibel tests..My setup is multiple decibels lower than those apples to apples.. And mine you can still here from a mile away with the setup I have
@silastorres89712 жыл бұрын
I go the same exact color mine will be here in August I'm excited
@atvsteez22362 жыл бұрын
AWESOME MANG!! Such a dope color!
@rmsackchris2 жыл бұрын
What exactly does the AIS delete do to the atv
@atvsteez22362 жыл бұрын
So basically from factory all these bikes have California emissions set in place which are built into them. This in turn, prevents the ATV running how it should. From factory you will experience noticeable bog and also stalling at low revs specially going into corners or turns. If you remove the AIS, you will notice 1000% difference in how good your quad runs!
@rmsackchris2 жыл бұрын
@@atvsteez2236 thanks for the reply ill def look into eliminating it
@Fox250R2 жыл бұрын
@@atvsteez2236 To be clear, the AIS delete doesn't fix the low-end bog. When I removed mine i really didn't notice anything different other than no more Backfire on Decel.
@atvsteez22362 жыл бұрын
@@Fox250R okay, which is still huge! No one wants gun shots when riding lol. Either way the AIS WAS A MUST REMOVE for me.
@Fox250R2 жыл бұрын
@@atvsteez2236 Oh 100% it has to be done for sure but like I said, It has nothing to do with the low end hesitation.
@davidrubio84342 жыл бұрын
You have a beautiful atv
@atvsteez22362 жыл бұрын
Thank you man!! Means a lot 🙌
@bikelifekei_9102 жыл бұрын
next time no music
@atvsteez22362 жыл бұрын
Thanks bud , it’s my first time doing a channel and I’m trying to grow it and help my fellow riders so I try to keep it less boring with adding some background music..especially on a very long video haha. 🤙
@smokydagoat12442 жыл бұрын
My 2022 SE black and white will be here early July I’m so excited! I never owned anything brand new before except a lawnmower and a bicycle😂 Im just going back and fourth with red,blue or gold accents I definitely like the red on your quad💯
@atvsteez22362 жыл бұрын
Thanks man! Congrats 🤘Your going to love it. Just remember to set some bread aside for the big 3 + AIS delete and your golden!
@smokydagoat12442 жыл бұрын
@@atvsteez2236 Yea for sure! I’m gonna do exactly what you did in this video, I also definitely need a full skid plate given I live in pa and have mountains,rocks,boulders, etc
@atvsteez22362 жыл бұрын
@@smokydagoat1244 absolutely a must in the north east! Check out my other video of the ricochet and GYTR skid install.. You just gatta decide if you want the poly material or metal. I opted for the full metal jacket haha
@raptor250rful2 жыл бұрын
Hi man , great video .. I was wondering if you could help me with the right vortex settings .. ? I have the 2021 yfz ( yoshi pipe , fci intake , ais delete , hot rot crank shaft , Athena stock bore cilinder and the cp piston 12:5:1 and the stage 2 hotcams.. ) I ran map 8 with 555 but it blew my crankshaft bearing .. I guess I ran it on a to powerful map ... so im curious what you suggest. or meaby have an idea were I can get this information.. thank you
@atvsteez22362 жыл бұрын
Hey man very similar setup! I didn’t mess with the shaft or cams, just did the BIG3/AIS DELETE/ & the 38 MOTORSPORTS BREATHER BOX. I have ran mine with no issues and no backfire etc. on Map 9; 5 low, 6 med, 6 hi. It has ran flawlessly. If you need a direction to go and more information I 100% recommend going to YFZ CENTRAL off google and getting answers there. You’ll have hundreds of ppl with useful solutions to help you out. Good luck brother! Thanks for the subscribe 🤘
@raptor250rful2 жыл бұрын
@@atvsteez2236 awesome man, thank you for the reply.. I will definitely give it a try! keep it up with video's like this
@atvsteez22362 жыл бұрын
@@raptor250rful THANK YOU BROTHER LET ME KNOW HOW THAT GOES!! 🙏💪👌
@NightAtTheRoxbury2 жыл бұрын
dope video nice piece of land you got there. id love to come and take rip one day! check out my 450rse with the fastest big 3 setup here kzbin.info/www/bejne/imiQeGZvZ8l8bdE
@aldinturan32712 жыл бұрын
Very nice and detailed video. I just picked up a 2022, exact same color. I looked everywhere, but I can’t find a seller that says the Vortex works for the 2022. That’s a lot of work for the intake install haha!!
@atvsteez22362 жыл бұрын
Awesome, congrats man! Always get compliments on this colorway YFZ! As far as what will work and what won’t, this will be the same as the 2021. I ordered my vortex off of RACINGPOWERSPORTS.COM and it will definitely work for you as well 👌 Most sites just haven’t updated the website or are back ordered anyway because it’s that time of the year.
@aldinturan32712 жыл бұрын
@@atvsteez2236 Thanks for the quick reply. Is it true that just about anything from the 2021 will fit for my 2022? I wanted to order some other accessories, like handlebars, etc.?
@atvsteez22362 жыл бұрын
@@aldinturan3271 yup you’ll be all set brother, it’s the same exact bike as the 21’ YFZ450R
@Fox250R2 жыл бұрын
Year doesnt matter. 14-22 are the same bike!
@Davido502 жыл бұрын
@@Fox250R THATS A GREAT THING BRO .
@naturallyazzpirated37762 жыл бұрын
So I have a 22 also same exact mods except a dasa shorty. I’ve messed with my vortex on all the maps but leave it on map 9 now. No matter the map of I am using super light throttle like say going on a slight downhill on the road the quad pops and sputters? If I’m going through the gears or ripping on it it runs perfect. Does your happen to have this weird quirk?
@atvsteez22362 жыл бұрын
Yep I know what you are talking about exactly! This is why you need to delete the AIS. If you don’t you will have backfires on decel. Once you do that at the same time I would get the 38 MOTORSPORTS breather box as well, you’ll thank me later 🤘
@naturallyazzpirated37762 жыл бұрын
I already deleted the ais and put a 38 motorsports breather on. I literally did everything you did other than I have a dasa shorty. And it still does this popping when really light on the throttle.
@atvsteez22362 жыл бұрын
Got you. You can find a common thread or post up what’s going on with the back fire on YFZ Central. You are not the only one with that issue but I know I haven’t ran into that at all with everything that I installed she runs mint!
@Fox250R2 жыл бұрын
@@naturallyazzpirated3776 What fuel you running
@Fox250R2 жыл бұрын
Did you get it dyno?
@toddschultz89062 жыл бұрын
I have ricochet full body armor on my 2020 yfz, riding the boulders of pa. Holding up pretty well after 2 years. Sheared one bolt off the rear plate, was a easy fix.
@smokydagoat12442 жыл бұрын
Where about in pa? I just moved to Austin pa from nj my 2022 yfz450 is already ordered and will be here in early July! I’m definitely excited to explore the mountains here I’m really loving these jaw dropping veiws!!
@toddschultz89062 жыл бұрын
@@smokydagoat1244 I’m in schuylkill county. Famous Reading Outdoors is just over the hill.
@smokydagoat12442 жыл бұрын
@@toddschultz8906 oh nice that’s about 3hrs from me and yea there’s not much riding spots over here my father and I are planning on building a riding attraction with rock climbing,skiing, hill climbing, literally everything you can think of I definitely wanna build a riding spot out here
@toddschultz89062 жыл бұрын
Good plan. Best of luck
@kaseyjohns51692 жыл бұрын
I really want to get a fci intake for mine.run stock filter right now. You should get them warning labels removed and get the plates I ordered some on eBay it makes it look a lot better. I Also got the tail light delete
@atvsteez22362 жыл бұрын
Yea the FCI wakes this thing up paired with the full exhaust and vortex tuner.. it’s much faster now! And I’ll look into those plates
@kaseyjohns51692 жыл бұрын
I really like the look of that black & white SE. I got a 2017 SE. So what's the point behind the breather box mod
@atvsteez22362 жыл бұрын
Yea I love the color way! The breather box doesn’t hold any extra oil it just captures it an immediately sends it back into the engine instead of the air box which is what a stock setup will do. Must have!
@justride91992 жыл бұрын
I’m from ma just moved up here wanna take my number down or something so we can go ride some time ??
@justride91992 жыл бұрын
Would the plastic black gytr skid plate be better ?
@atvsteez22362 жыл бұрын
It just depends what you would prefer. I wanted something a little bit tougher to withstand the granite up in the Granite State haha. So far it’s been holding up great 👍
@cowboy91lol882 жыл бұрын
I am thinking about getting these for my 400
@atvsteez22362 жыл бұрын
Yeah the skid plates are a must because the factory ones just plain old suck! I was thinking about going with a polyurethane design like TM-design works but I have heard nothing but great things about the GYTR metal full chassis plate and Ricochet’s heavy duty rear guard is so solid. I recommend both 100% 🤘