2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
Пікірлер
@JW9422 Күн бұрын
Thanks for the info. You went over the good stuff in an easy to understand way.
@robbenoit6065 2 күн бұрын
"Ruff"
@mijolobo 8 күн бұрын
Watched your video a few times before starting ours. We constructed it today and did it in 3 to 4 hours! I have COPD w/emphysema plus asthma and required many moments of needing to catch my breath. We are both over 65 and well, we did it! Your video was extremely helpful and easy to follow. Our only setback was trying to install the door lock housings. For some odd reason, we were stuck for far too long trying to install them on the inside part of the doors. We rewatched your video numerous times till it hit me that those housings needed to be on the outside! Argh! Then it was a piece of cake. Next problem was with the hinges after installing the middle hinge first, both sides, it took patience and some paint mixing sticks to shim the rest. Thank you for your helpful KZbin video🙏🏼💯👏🏼❤️
@carlytackles 8 күн бұрын
Thanks for leaving this comment. I am happy to hear success stories and glad the video was helpful. Nice work on your project!
@joejoe-lb6bw 16 күн бұрын
Excellent instructions and your skills are great. I'm debating buying this shed, and your video was very helpful. Still undecided, though. If I get it I will put a French Cleat system on the rear wall; just one board of plywood with the cleats. That would give me optimum flexibility. Love how you pronounce "roof".
@carlytackles 11 күн бұрын
Thanks for taking time to leave your comment. :)
@acapdevila 27 күн бұрын
Hey, this helped me to think about something i needed for my pool. Thanks
@carlytackles 26 күн бұрын
Glad to hear it. Thanks for taking time to leave a comment
@bernardmiron6732 Ай бұрын
Thanks for the video. My lever for bevel cuts seems striped and will not move the lock shaft to prevent saw from tilting left. How do I fix this?
@dannyarrington8936 Ай бұрын
These lights are awesome. The one thing I would caution about is using the right type of silicone with electrical wiring. Loctite SI 5990 is a non-corrosive silicone that can be used with electrical wiring. Non-corrosive silicone is what you want other silicone can corrode copper and other metals.
@carlytackles Ай бұрын
Great addition. Thanks for leaving the comment
@luckyfamilyman Ай бұрын
Thanks so much for your wonderful video. I got no problem doing it on gravel like you did too. You should do a follow-up video to show everyone how it’s not “offkilter“ by doing your shed on gravel. This is not fine furniture people I had a shed on gravel for 20 yearsand it was just fine and I sun and tiedowns for when it gets windy so I don’t know what the big stink is everybody scared to void their warranty
@showtime4956 Ай бұрын
Very Helpful review, and step by step guide …
@melissaramirez2310 Ай бұрын
The best video ever!! I saw other ones and they didn’t go in order and I didn’t know how to insert the s rail and you were the only one to explain it. Thanks
@carlytackles Ай бұрын
Thanks for taking time to leave the comment. I’m really happy to hear this video helped you out.
@benhaze1010 2 ай бұрын
Good job!!!
@monkeyking-self-proclaimed7050 2 ай бұрын
Nice! Now I can organize my shed. Thanks for the good ideas.
@MidniteClubII 2 ай бұрын
That twine sure gave your contraption that hickish look appeal... 😂😂
@simongardner3509 2 ай бұрын
Fabulous, thank you!
@MARINOMIXTV 2 ай бұрын
What size of pvc pipe and how long led strip watts of led strip
@rainycity428 3 ай бұрын
I love this idea! I was actually looking to see if I could fix a tiny hole in my dogs pool and going to try this instead! And I love the idea of adding the hose back at the end because I want to be able to drain the water away from where I have to put the pool on my patio! I’ll let you know how that works!
@businessleadership2717 3 ай бұрын
Genius! Think I'll copy!
@carlytackles 3 ай бұрын
Great! Let me know how it goes.
@businessleadership2717 3 ай бұрын
Nice bench. I like the creativity. I am a new woodworker and am working on !y workbench now. It will not be as fancy as yours though. I am only. Putting one 3/4 piece of plywood on top. How deep should dog holes be? Should I add more plywood? The plywood is not inlaid like yours it sits on top of 2/4 frame and support.
@carlytackles 3 ай бұрын
Welcome to woodworking!!! I hope you enjoy it as much as I do. I would have the dog holes go completely through. Some of the accessories have a longer 3/4” shaft. Before I made my workbench, i watched youtube videos, many recommended at least 2 sheets of 3/4” plywood. The great thing about woodworking is you can always build another workbench as you learn what you like and don’t like. Think of it as a prototype.
@businessleadership2717 3 ай бұрын
@carlytackles hi. Thanks. I also wanted to ask you how to make something plum. My workbench on one diagonal side is 95 5/8 and the other side is 95 7/16. How do I get it even?
@carlytackles 3 ай бұрын
@businessleadership2717 if this is a solid piece like a sheet of plywood, you will have to make some cuts to ensure corners are 90 and sides are same lengths. If it is something like a frame, its normally my angles in the corner, especially if i used miters, that are causing me issues. Before assembly, can use clamps to make sure corners are square and are good to go before glueing or fastening. Also, never trust a manufacturer edge is 90. I typically cut 2x4 ends off at the miter saw before starting measurements.
@businessleadership2717 3 ай бұрын
@@carlytackles thank you
@MadelynnIsAwesome 3 ай бұрын
hello loved the video! how long did it take you to fill the pool??!
@carlytackles 3 ай бұрын
With 1 hoses-> entire day. The last few years we have used 2 hoses to fill it up and it takes about half a day.
@karl28560 3 ай бұрын
The best DIY about hard plumbing the intex pool!!!!🎉🎉🎉
@neomacchio4692 4 ай бұрын
She said “side piece” 😂
@CfTesla 4 ай бұрын
Thank you for taking the time to show details.
@carlytackles 4 ай бұрын
Glad you appreciated it and thank you for leaving a comment.
@maskmaker2505 4 ай бұрын
This is amazing 🎉
@sissyhaskell6939 4 ай бұрын
I know you made this video 3 years ago....... I just found it after replacing my hoses 2 years in a row. LOVE your video!! I can find all parts except the 2 flush bushings????? Do you have pictures or links for those parts? thank you so much
@carlytackles 4 ай бұрын
I picked them up at a Menards. Their website is not the best, I tried getting the exact flush bushing to come up but it did not work.
@ek8137 4 ай бұрын
You guys did better than me. Took me 2 hours after having it unpacked. Filling it up now. Watched the video first and helped me avoid reading the tiny instruction print. Came back to comment and say thanks! 👍
@carlytackles 4 ай бұрын
Great to hear that it helped. Thanks for leaving a comment
@justplainoldmein6010 4 ай бұрын
I rarely comment on DIY videos, but I must give you a HUGE thank you for doing this. I bought a used vinyl pool this season and of course it has leaking issues. PVC to PUMP was the ideal fix. I didnt know where to begin until I saw this video. A million thanks to you!
@carlytackles 4 ай бұрын
Thank you for taking time to share your thoughts. I’m glad it helped you out. Thanks for watching.
@DaMan360 4 ай бұрын
Thanks for the materials list. Very pro.
@bobt7484 4 ай бұрын
You ROCK! Very cool video, and LOVE the background music!
@michaeldamico9592 4 ай бұрын
Going to start putting this pool together now…!! I will Luke how it goes…!! Your video is definitely going to help me out…!! Now I know what I am up against THANK YOU 🤞🤞🤞
@jamesbyers1165 4 ай бұрын
Thanks,just bought mine and was confused on the bevel cut adjustment. Edit: For anyone like me who still couldn't get tilt to work, check the troubleshooting section to figure out how to adjust the bolts in the back for bevel tension and lock arm tension. The smaller bolt you loosen to reduce friction on the lock arm and the larger bolt you loosen to allow the saw to tilt for a bevel cut, and vice versa for tightening.
@Fulvio-dy9hi 4 ай бұрын
Funsicele oasis lap pool 18×9
@bethringsmuthstolpman404 4 ай бұрын
Just did this for my dog’s large pool and didn’t even need a drill! I traced the fitting with a sharpie marker and then cut out the circle with the utility knife. 💦❤️
@beautifulone3249 4 ай бұрын
my water flows slow
@carlytackles 4 ай бұрын
If you need more water pressure you can try adding a utility pump.
@jordankooiman6040 4 ай бұрын
Awesome video.
@007calvine 5 ай бұрын
How far do the legs stick out at the bottom from the sides?
@carlytackles 5 ай бұрын
The manual says that when the pool is full of water the width of the pool, including base of frame is 19’ x 10’. I find that pretty close to accurate. It might extend a little farther
@ianjones5297 5 ай бұрын
Good job
@clarencetate8145 5 ай бұрын
My suction filter does not fit over pvc. Is the 3/4 a different grade?
@carlytackles 5 ай бұрын
Try sanding the outside of the pvc a bit to get it to fit in the filter fitting.
@domb2NY 5 ай бұрын
Nice video. I plan to do this this year. Appreciate the close ups on the pipe clamps, wasnt sure from your descriptions alone how the pvc would seal to the outlets. I'd like to pvc the outlet and inlet sides.
@marekfucila5233 5 ай бұрын
Nice. Eventually you could make the downward pipe longer up to the ground and mage there 90 degree angle to the hose. Then it would be self-supporting.
@carlytackles 5 ай бұрын
Great idea
@CR3DT 5 ай бұрын
Hi Carly, I appreciate the info on the bolt size. I am not sure where I would have fount that. What length of bolt did you use with your 2x4 ?
@carlytackles 5 ай бұрын
Because i drilled into the board so bolt was flush, i used 1-1/2”. But if you just wanted the bolt to sit proud of 2x4, 2”
@WayneRandall-tq4nd 5 ай бұрын
I have to say this is the best and most thorough video for pvc conversion. Thanks!
@carlytackles 5 ай бұрын
Glad it was helpful!
@jpindahaus 5 ай бұрын
Loved the video - thanks!
@carlytackles 5 ай бұрын
Glad you enjoyed it!
@edil.lopezm9443 5 ай бұрын
I will use 4×4 pressure treated lumber, p stone, fine sand on top, black heavy duty targ .....how far out of 18×9 should I set my frame? I want to set it right next to my existing deck ...plz
@edil.lopezm9443 5 ай бұрын
Can the pool be moved once is set up but still empty? Can I drag it empty?
@carlytackles 5 ай бұрын
For setup- you are going to want to allow for room to work and fully extend the u frames. The manual says the frame (when setup) will stick out an extra foot making your total pool dimension 10’ x 19’. I would allow for more room. If I could do it over, i would extend that paver width - my length was fine. The frame needs to hit the center of the support- ours ended up hitting the outside edge of pavers and it caused them to shift.
@carlytackles 5 ай бұрын
Not easily. There is weight but the problem is more with the frames. They don’t support the pool well until water is it. They are going to fall in or out when you move it and will need to be setup again. The frames stand and extend to their proper place once filled with water.
@edil.lopezm9443 5 ай бұрын
I'm gonna set up mine soon. How far from the eage of my deck I should set the legs up? .
@carlytackles 5 ай бұрын
The legs when setup, take up an extra foot (10’ x19’) according to the manual. One thing to think about is that to setup the pool the u frame have to lay full flat and out away from pool. If the deck has a railing- make sure you allow for the length of the U frame on each side plus the pool dimensions or your setup will be difficult
@BriEntAnderson 5 ай бұрын
I just ordered one and I can't wait to put it together.
@carlytackles 5 ай бұрын
Thats great! Hope you enjoy it. We have used ours for a few years now, taking it down every fall and putting it back up in spring.
@Superman-xr1oh 5 ай бұрын
Why do this when intex literally makes a skimmer that hangs over the inside of the pool?
@carlytackles 5 ай бұрын
I would recommend buying the Intex one of price is still reasonable. Back when pool supplies were extremely hard to find during peak of covid- this is an option to make your own so you can have a skimmer.
@bigtaco956 6 ай бұрын
not sure what i did wrong the doors are rough to close, any tips?
@carlytackles 6 ай бұрын
Does it feel like the door is being restrained from the hinges or from the top and bottom?
@bigtaco956 6 ай бұрын
@@carlytackles more like its rubbing against the black plastic frame.
@carlytackles 5 ай бұрын
@bigtaco956 is the the the bottom portion level front to back and left to right? Thats all i can think of if its hard to close. There is a slant in the front of the bottom that doors rub against to help lift it up and then it falls into the notch- its not a rough close though.
@jgg204 6 ай бұрын
Can you put the plastic base directly on gravel?
@carlytackles 6 ай бұрын
That is what I did.
@gcroon6 6 ай бұрын
I owe you a beer. Thank you! From Traverse City, Michigan.
@carlytackles 5 ай бұрын
Any time!
@tlchenvt 6 ай бұрын
This is very helpful. Thank you. I bought 9/16 screws and they fit perfectly.