my turn signals dont work . i even changed the bukb
@evo250019 күн бұрын
hey the turn signals dont work for some reason. i even changed the bulbs
@NealGeiger-m6f2 ай бұрын
I'm late to this party , but a picture of the splice would have been very helpful.
@MG-qy9yp4 ай бұрын
20 freaking years and never heard a whisper about this lmao👍🏼. Pretty cool
@kilroy797635 ай бұрын
neat little bit of knowledge...thanks -subbed
@duncan43585 ай бұрын
Pin head
@LorettaMoser7 ай бұрын
Thanks 👍
@gilbertsandoval18888 ай бұрын
Got to admit I'm guilty of that too! 3 inch exhaust with Flomaster 40's on a 2002 Mustang GT👍
@dustinkuhn44588 ай бұрын
Hey which wire on these headlights is the DRL? Thanks!
@HaloForteen9 ай бұрын
Hey Xander, what's up, did the Diodes fix still works with no side effects? An electrical worker doesn't want to install them for me because he said it wasn't good to do so.
@XanderMeisman9 ай бұрын
Hey! Yes, the diodes I installed are still working. I thought I had a problem with them recently but discovered my factory headlight connector was just loose. I’ve had no issues with these working though since I installed them.
@HaloForteen9 ай бұрын
@@XanderMeisman Thanks Man!
@leadershipprime642310 ай бұрын
@olyalap11 ай бұрын
Xander, where is the AUX input on Mustang convertible 2004?
@Dealerplates4209 ай бұрын
You have to buy a aftermarket radio
@fabiotuzzi372411 ай бұрын
Just found this video, how many HP you got with the mods you did 210 kinda thing?
@stevencarlos4196 Жыл бұрын
Not working on mine ? 😭
@yngboat Жыл бұрын
Do you know why my led strips don’t turn on ?
@yngboat Жыл бұрын
I bought these and my side markers won’t turn on, do you know why?
@Anonymous_Music Жыл бұрын
Super Clean Idle. Pin Doesn't Move At All
@jerryp3551 Жыл бұрын
Man it looks like you were “back on the road in no time!” Hahahaha
@everyday80sdude86 Жыл бұрын
Most people who know their New Edge already know this. You're late in the game, son.
@XanderMeisman Жыл бұрын
Hahahaha I mean the car is only 20 years old 😂
@Jouz37 Жыл бұрын
Sorry pal but I didn't find this helpfull at all..All you did was tell us you fixed it using some diodes.. That's all. You could've at least shown in the video how you wired them with the diodes you got. The image on the community section is just a very blured image that doesn't show the direction of the wiring or anything usefull at all. This could've easily been explained in 2 minutes by just showing us the diode you used and how you wired them together. Very dissapointing video...
@XanderMeisman Жыл бұрын
On the road master you splice the red wires together. This goes on the “in” side. Do the same for the white wires. These go on the other “in” connector on the diode. The “out” connector is left unconnected. You can either tape it up or leave it as is. It’s personal preference.
@dasmeshsingh5569 Жыл бұрын
Did u get it to work?
@Jouz37 Жыл бұрын
@@dasmeshsingh5569 Yes, but not the way he explained it. The cable connection pattern is not the correct one. I just uploaded a video how to really wire this up to make it work. kzbin.info/www/bejne/h6endmiFit59e5Y
@reynaldoflores8829 Жыл бұрын
Didnt tell you what to "CHECK ON ENGINE" relating to light warning
@sonsoftheedelweiss72 Жыл бұрын
I’m here !
@slowjamcdub Жыл бұрын
Wow your right not to many know about this. Really cool💪🏻✌️
@goodvibes7234 Жыл бұрын
nice vid!
@goodvibes7234 Жыл бұрын
mine is hitting 300k miles lol
@rdemaso722 Жыл бұрын
The screens that say p1-p7 what are those?
@fia8079 Жыл бұрын
Dumb and dumber
@rickrivera25532 жыл бұрын
Hey Xander thanks for the video! Did you keep the single filament bulb that came with the eBay lights when you connected the diode or is this a different bulb connected? Thanks for the info!
@XanderMeisman2 жыл бұрын
This will work with the single filament still. The diode just moves the shutter when the high beam is triggered. I did change my bulbs out for the auxito led bulbs but it functions the same.
@buddyquest45752 жыл бұрын
So how long did it take you guys to replace the clutch?
@XanderMeisman2 жыл бұрын
Honestly I think we could’ve had it done same day if it wasn’t for the lack of time, getting the flywheel resurfaced and the trans rolling over on a sensor..
@buddyquest45752 жыл бұрын
@@XanderMeisman thank you, great video to watch. I was wanting to see how long it took because my 2012 clutch was soft and I couldn't put it in reverse. I had it towed to the dealership and it has been sitting there 2 days. Someone finally contacted me. Ford dealership advisor said it's the clutch master cylinder that need replaced. $700 dollar repair!
@ceansilorcaso58202 жыл бұрын
You have 244.000 miles in you car? I have 227.000 in my 2001 Bullitt and I need to fix a oil leak.
@XanderMeisman Жыл бұрын
Nice! Currently sitting at around 253k on it right now. I need to drive it more than I have been.
@CheetahSnowLeopard2 жыл бұрын
Wow.
@chaseandrews19762 жыл бұрын
Did you post a picture of the wiring for the recommended diode? If so I couldn’t find that on your page
@shabakadean58422 жыл бұрын
Just bought a 2003 3.8 v6 with 111000 very good car I know it will last 10 years and I’ll reach 35000 watch
@clifforddodson54592 жыл бұрын
Thanks pretty cool never new but only had my 01 for three weeks.
@CheesusSVT2 жыл бұрын
Very neat, I have a tablet hooked up to my 03 Cobra, But never knew this until now. 😅
@davidosborn76752 жыл бұрын
On that digital speedometer will it read higher than the analog? My speedometer says 150 I can Peg my analog and the car still increases speed but I don't know how fast I'm going.
@upierced692 жыл бұрын
Do you have more details for installing the hy-diode?
@GatesRapes2 жыл бұрын
Ya gonna need a battery soon
@matthewdouglass95642 жыл бұрын
I've owned the car since new. I wasn't aware. Thank you!
@clout-afool13062 жыл бұрын
It’s not working on my 2004 v6😕
@Mike-bb1li2 жыл бұрын
Did it make the clutch pedal easier to press in? Thanks! My 2014 Shelby pedal is hard to press down.
@XanderMeisman2 жыл бұрын
I wouldn’t say easier after I lived with it for a while. I would say it made it feel smoother and more predictable than the stock one though with the mt82. It may be a little different since you should have the tr6060 trans. Biggest thing that would help with a heavy pedal would probably be a twin disc clutch.
@Mike-bb1li2 жыл бұрын
@@XanderMeisman Thank-you! Getting used to it now after driving it for a while. Thanks!
@XanderMeisman2 жыл бұрын
No problem! That’s one of my dream cars lol Enjoy it!
@ZIPLOC6662 жыл бұрын
Ford power
@jm92gt03gt2 жыл бұрын
Dam I've owned mine since 2003 and never knew this, I will be checking it out this weekend.
@LiLxReAPeR1012 жыл бұрын
I gotta 04 gt and this is bullshit
@Joemauma_2 жыл бұрын
Longtubes are not fun to install but it’ll sound great
@XanderMeisman2 жыл бұрын
I can’t wait to get them on mine. Still been too busy to do it but hoping here soon I’ll have a weekend todo them
@Moon_hopper2 жыл бұрын
Hi, I have a 2002 Mustang V6 that needs a smog test but tester said the 'Service Engine Soon' light doesn't flash when car is on the 'On' position. I did a reset of the dashboard holding down the button and the light does light up but it won't with a normal start-up. Any help would appreciated.
@XanderMeisman2 жыл бұрын
Hello, I don't think mine typically will flash either. I know that when it isn't throwing a code it would just come on briefly before turning off but I may just have not paid enough attention to it. Might be worth unhooking the battery for about 30 minutes to see if anything changes.
@BlackWidowdetailing2 жыл бұрын
I have a 2003 mustang gt just got it it had 230k on it but runs amazing and had plenty of power and starts everytime the interior is excellent shape the outside not so much But idk how much longer it'll last before a rebuild but idk if it has already been rebuilt I want to beat on it but I'm afraid to lol