reaper

The keycaps are solid for its price and legends on the alphas are consistent, you'll just notice the inconsistencies on the modifiers such as the backspace and enter key. These are double shot abs and mine are already begin to show some shine but these aren't as textured as GMK.

@@geniepapi I think its pbt not abs, because the black is more like very dark gray. I got mine for 3 days, and overall it is good.

@@geniepapi this keycaps set has no numpad right?

@@daffadamar588 It's abs, also said on the site that it's abs. You can find some comparison videos here on youtube stating that it's also abs comparing it to gmk and other double shot abs sets, and also my set is black not very dark grey from what I'm seeing.

@@daffadamar588 yup no numpad

Yes it supports via

just some o-rings that i found on shopee 4 x 1.5 x 1 size

Shenpo 6001

None that i know of

Aluminum plate and switches are stock

@@geniepapi did they come pre lubed

@@allevalle not sure, did not open them since they were from the client and he wanted to keep them stock. Very smooth stock tho and i didn’t seem to hear any spring or leaf noise

@@geniepapi ok thanks for the reply

@@allevalle my pleasure

Yes lubed and filmed

I like them. They have a good dye sub quality especially compared to geekark.

Just from a local maker here in the philippines

Thanks!

You can just look for Akko Psittacus on shops that sell akko products, as for the escape and enter key i used GeekArk Seasalt Blue accents

Thanks!!! I let go of the neapolitans a long time ago haha currently using the naevy r2 from aeboards

@@geniepapi Oh how do you like them compared to other tactiles you've tried? Been looking for a tactile to buy but not sure what to get for my first one. I got a tester the other day that I got with: sunflowers, t1s, kiwis, Neapolitans, purple pandas, glorious pandas, and u4ts and i probably liked the feel of the Neapolitans the most

@@p0keyy naevies have been my favorite tactile to date. ive grown tired of the heavy tactile experience and im enjoying light tactiles now :)

no mods done on the board itself, just clipped, lubed and holee modded the stabs and then replaced the switches with akko jelly blacks

The keycaps are akko psittacus! There are plenty of vids here on youtube on the pe foam mod

GeekArk WoB

Sheeesh what an honor, 35 keebs watching me

@@geniepapi 🤪

Nope its actually the bruce lee colorway then i had it powdercoated to glossy white

Used the stock foam and just one layer of pe foam for the case, 3 layers of tempest mod, and yes the flex of the gaskets were eliminated but you can still have the flex if you opt to not use the included case foam

I did not use the stabilizer pads! I don’t really use them in my builds. My stabs are holee modded and lubed with xht-bdz for the wire and 205g0 for the stem and housing.

Lubed with 205g0 gazzew style and yes i am using the steel plate.

@@geniepapi awesome thanks for the info

durock v2 stabs. the r3 will sound different from the r2 since the r2 is top mount while the r3 will be gasket

@@geniepapi It's just what i expected lol. it will be fine.

Congrats!

I’ve actually let this board go, it sounds a bit too muted for me and feels cheap in the hand, it really is a cheap60 😅. The board has already been tempest and pe foam modded but was still muted for my taste. I suggest going tactiles over linears for this board to make it more audible.

@@geniepapi thanks a lot! Well I’ll take it as a stepping stone for more boards to come. Thanks for this man! It sounds great on recording tho

@@randellpanganiban5522 it does sound good! Just sounds a little too soft in person for me but its still good 😊

@@geniepapi mine is on its way! I’m placing some JWK Lavenders on them so I’ll let you know how they go! Again thanks a lot! I appreciate the advice!

So I got the keyboard and built it. I ran into a bunch of issues and wanted to know if you happen to have experience this. The switches don’t go in the acrylic plate properly and I ended up having it built with some keys not straight. I tried plugging the switches back in but that really is the orientation of the plate. Over all typing experience is good I agree its quite muted but it sounds nice! Do you happen to know what may be the reason why my switches won’t properly go in? Is this a common issue with the board?

hi! got the pom plate from a local shop that makes custom plates here in the philippines PMX.GG, as for the d65 gaskets i applied them underneath the small tabs of the plate, as for ping on my mods i also dont have foam between the plate and the pcb besides the pe foam, also no foam underneath the pcb just the tape mod

haven't tried using an fr4 but POM generally makes switches poppier from what i know

Thanks!

the alphas are just a lighter grey compared to the mods

Nahh bouncy af

@@geniepapi did you get the pom plate from kbdfans?

@@1700tt had it made