Good job explaining this. However it would be better if you could have shown examples of each type with an example of how they are to be marked based on their application, so even a dummy like me could understand it better. Thanks.!! I have been retired for 11 years but I still get questions from time to time and like to keep up to date as best I can so I can help other people out.
@MasterTheNEC10 сағат бұрын
Greetings. Free content is always going to be bare minimals. Our videos on FastTraxTube.com are more detailed.
@swanjone24752 күн бұрын
thanks you for this explanations of NEC exam Prep , it is so helpful. I wondering if i passed the NEC exam , do i get a certification or I don't?
@MasterTheNEC2 күн бұрын
Why would WE give you a certificate? If you pass your exam, wasn't that the goal?
@baugh31623 күн бұрын
Hello, I imagine these videos will help me with the Electrical Inspectors exams as well?
@MasterTheNEC2 күн бұрын
They are a benefit to any NEC based exam.
@baugh3162Күн бұрын
@@MasterTheNEC Thank you, these are very helpful. This book is Comp Lee Kated
@elitescientist3 күн бұрын
My 125A breaker that is feeding my subpanel and my 100A EV Charger breaker is reading at 120 and 137 degrees Fahrenheit respectively when charging my vehicle at an 80A load. I'm using a FLIR camera which is showing this and caused me to do a bunch of research and led me here. Everything is torqued to specification.
@MasterTheNEC3 күн бұрын
Greetings - What type or level charger are you using to be 100A. Typically these would be 50A. However, if its installed by a licensed tech then I would stay away any FLIR testing and rely on your properly sized circuit breaker. The CB will trip if circuit is overloaded otherwise I suggest you hire a licensed electrician and they will be able to look at everything and put your mind at ease.
@elitescientist3 күн бұрын
@@MasterTheNEC Thanks. Its a Level 2 Charger at 80A.
@MasterTheNEC2 күн бұрын
Never seen a Level 2 above 50-60 Amps.
@rrussell398 күн бұрын
I took FastTrack a couple years ago Paul. I had a headstart since I had already had my Masters license but that was taken in 1990. Needed the Texas Masters so since it had been so long I knew I needed a refresher to say the least. Took the Texas test with a 98 and 100 on the two sections. Can't say enough about the program...it's good, really good. Take care.
@MasterTheNEC7 күн бұрын
Hey Fella. Thank you so much for your comments. You did amazing in the program and glad it was helpful for you. Don't be a stranger fella, reach out if you want the updated link to Wednesday night sessions.
@B-JornSierra10 күн бұрын
¡Gracias!
@theoneandonlybobby793310 күн бұрын
Do you use column 75c if no adjustments are needed?
@MasterTheNEC10 күн бұрын
If no adjustments or corrections are required you simply follow 110.14(C). You can only use the 90°C of a conductor rated as such when all terminations are rated 90°C or when doing derating as long as your load doesn't exceed the 75°C values after derating. Hope this helps and consider subscribing at FastTraxTube.com to help support our videos.
@jefffielder242911 күн бұрын
you did a great job thank you so much
@aztec100513 күн бұрын
I love you amigo
@MasterTheNEC10 күн бұрын
Love you too Kemosabi!
@ryanutley174414 күн бұрын
I thought that you load all breakers to 80 percent? I do commercial tho but is that like a test thing do you not take the 80 percent off usually?
@ryanutley174414 күн бұрын
Or is this specific to the cord and plug loads
@MasterTheNEC14 күн бұрын
Why would you only load a circuit breaker to 80% if its not a continuous load?. If its a 20 amp circuit breaker, its designed to handle 20 amps. Now, unless its rated for 100% of its rating, when you have a "continuous" load its only them you limit the load to 80% of the breakers rating.
@MasterTheNEC14 күн бұрын
The rules in 210.23(B) are specific to cord and plug loads where you KNOW the loading. Not sure why folks think this applies to general use receptacle loads. For example, cord and plug in-sink waste disposal will apply to 210.23(B) but again not general use receptacles.
@antonkanukhin747115 күн бұрын
Thank you! 👍🏼
@opecons18 күн бұрын
If we can't use optional method less than 100A service conductor ampacity, how do we know the ampacity of service conductor 100A or greater ?
@MasterTheNEC18 күн бұрын
You always use the standard method in all cases. Now, single family dwellings cannot be less than 100 Amps per 230.79. So, you do an original calc and then use that to dictate if the "optional" methods is applicable. On exams always assume standard Part 3 method unless they state otherwise.
@purequalityelectricllc355118 күн бұрын
Great information
@MasterTheNEC16 күн бұрын
Glad you liked it
@georgebradshaw462819 күн бұрын
Yes so true!
@Mark244820 күн бұрын
I can’t hardly go to the comments anymore. It’s just so aggravating. Sure, some are probably just trying to stir the pot and actually know better but the amount of people who don’t and then beat their chest over wrong information is insane.
@Mark244820 күн бұрын
HVAC guys like those fuses in the disconnect. Easy service call. 😂
@jongarrison882621 күн бұрын
What about, for example, 4/0 MC feeders going into a panel? What is the securement code for that, because 12 inches apparently wouldn't apply. It doesn't seem to specify any other distance from the box, so is it only required to be secured 6 feet from the panel?
@MasterTheNEC21 күн бұрын
That is correct, on that size MC you can go up to 6' to the first securement point from the enclosure.
@Rdmanelect22 күн бұрын
Paul, you dont owe anyone an apology for "lack" of content. You have provided us with an almanac of knowledge for free! I have been following you for 4 years now and after doing the fast trax program in 2020, i received my masters right after. Thank you always for your continued effort!
@MasterTheNEC21 күн бұрын
I appreciate that!
@neidaestremera446524 күн бұрын
Have you thought about doing content on businesses management? Not code but more on how to successfully run an electrical business
@MasterTheNEC23 күн бұрын
Well, not really my GIG personally. However, we are taking content creators and would welcome someone coming on board to offer courses on that.
@Russ5724 күн бұрын
new chapter in your life. sounds exciting
@MasterTheNEC24 күн бұрын
Thank You Fella. Yes, we just launched the Instructor Portal so new instructors can start creating courses so yes, its exciting times.
@Mryeadon26 күн бұрын
How many shots do you get with the green gas before refueling it?
@MasterTheNEC26 күн бұрын
Well, Not enough to finish a walk through without changing mag. I ended up getting a laser with reset mag for my Glock 43X.
@seantreakle117426 күн бұрын
Again you helped me again thank you Paul. That index really works good Sean
@MasterTheNEC26 күн бұрын
Glad to help
@michaelrocchetti495228 күн бұрын
Your video has helped me tremendously. I plan on taking your courses to become a better electrician. I am willing to put the work into learning!
@MasterTheNEC28 күн бұрын
Glad it was helpful!
@brenta336129 күн бұрын
So what is the application of a floating neutral generator. I have one and simple want to run a 5000 btu portable ac and refrigerator. Turn ac off and run hair dryer.
@MasterTheNEC29 күн бұрын
You need to rewatch from 13:50 to 19:50 for what a bonded generator vs unbounded generator should be used for.
@mikenail2650Ай бұрын
Im gaining a lot of confidence by learning and watching these videos. Im a fastrax student and getting close to taking the CA general electrician exam. Thanks Paul
@MasterTheNEC28 күн бұрын
Glad to hear it! - Now NAIL that exam fella...See what I did there....Nail....lol
@mikenail265027 күн бұрын
😂, thank you Paul!
@seantreakle1174Ай бұрын
I can't tell you how much you just helped me. Thanks for breaking down all the language. I go to test on the 21st. JW. Thank you Paul
@champinsoccer9Ай бұрын
Just took my exam yesterday... Did some crazy studying before hand with your vids plus a few other electrical KZbinrs. Though it caught me off guard there were a bunch of solar questions. I made a 60 out of 70 to pass. I missed a bunch of the solar questions :/ plus there was questions about step up transformers and step down transformers. I know what I need to study now but it was tough. Got it rescheduled for Aug 25th. Will try again. Thanks for taking the time to make these videos.
@MasterTheNECАй бұрын
Greetings. Keep at it and you will get it fella. It doesn't matter how many attempts, what matters is you ultimately get it. Strange that you would see a lot of PV questions as my experience shows only 1-2 on typical exams. So, do not get hyper focused on just PV or Transformers. In my experience when someone gets ~60-70 on an exam that there was 30 other questions they got wrong and not all of them are focused on PV and XFMR's. So, moral of that story is keep studying balanced and don't get tunnel vision since chances are they really didn't tell you exactly which you got wrong. Stay Focused...You Got This!
@champinsoccer9Ай бұрын
@@MasterTheNEC thank you very much for your advice sir! That means a whole lot to me. I hope KZbin has a little on PV code. I feel I did good other than that. But it works out, now would be a great time to get familiar with PV. Most of the stuff I got questioned on we really don't deal with everyday so it's hard to keep it in my mind where conduit fill, box full, feeders and other general knowledge stuff I deal with and hopefully for them right. Again, thanks for replying to me! I'm going to keep at it like you said and pass it hopefully next time. Have a good day sir!
@MasterTheNECАй бұрын
Look up Ryan Mayfield and his videos on PV Systems. He is an amazing resource. www.youtube.com/@MayfieldRenewables
@champinsoccer9Ай бұрын
@@MasterTheNEC wow. Thank you so very much!!!
@champinsoccer93 күн бұрын
@@MasterTheNEC I PASSED THE TEST SIR!!!!!
@faststang85Ай бұрын
So on a detached shop with a separate service does that fall under the same criteria as an attached garage to a dewelling?
@MasterTheNECАй бұрын
An detached building with its own service is its own building.
@faststang85Ай бұрын
@@MasterTheNEC thanks. I need to get an nec book so i can do my own wiring on the shop correctly. Here in idaho the homeowner can do their own work then have it inspected.
@michaelyarbrough6462Ай бұрын
God bless you Paul 🙏
@hannahrose6910Ай бұрын
I think a lot of electricians probably feel the same way you do. My husband sure does.
@vanmetercАй бұрын
✊
@jesuscastillo7372Ай бұрын
🎉🎉🎉🎉 congratulations Paul your best !!!!!!
@roba9607Ай бұрын
Great video!!!
@seantreakle1174Ай бұрын
Thank you Paul this Sean out of Denver Colorado. Paul are you online only or do you have classroom on journeyman's exam prep
@MasterTheNECАй бұрын
Greetings. All our programs are online. Our program is designed to give more info than any classroom. Plus, you get me live every 2 weeks for a few hours to answer questions.
@opeconsАй бұрын
Hi master , can we use the flc on the table for sizing the conductor and CB of airconditiong?
@MasterTheNECАй бұрын
Use the nameplate on the equipment. No need to over complicate the application. It will give minimum circuit ampacity and maximum overcurrent protection on the nameplate...Stick to that data.
@stchmanАй бұрын
What about the Quinn pliers? They too have a lifetime warranty.
@MasterTheNECАй бұрын
No idea...don't have those and not part of my review.
@judasgoatamerika599Ай бұрын
Good video, my gorilla just arrived with wheels so when fully extended do the wheels go top side or bottom side, thanks.
@MasterTheNECАй бұрын
Greetings. Mine doesn't have the wheels add-on. I recommend reaching out to thr manufacturer.
@judasgoatamerika599Ай бұрын
@@MasterTheNEC I got it, thank you
@Profanity42069Ай бұрын
Fantastic
@MasterTheNECАй бұрын
Thank you so much 😀
@jackiechristopher2884Ай бұрын
Can I put a receptacle behind the door?
@MasterTheNECАй бұрын
Sure you can. The spacing rules starts at the break in the floor line. If you are talking a standard door then most certainly it could be behind the door. However, it would be more practical to use all 6' in your spacing so that the receptacle outlet is just beyond the doors edge.
@jackiechristopher2884Ай бұрын
I was asked this question on electrical exam I said yes I wasn’t really sure. Thanks for your help.
@jackiechristopher2884Ай бұрын
Can you put a receptacle behind a door
@MasterTheNECАй бұрын
Already answered in another post.
@michaelsmith2994Ай бұрын
Thanks for the practice questions.
@MasterTheNECАй бұрын
Our pleasure!
@bahmannosratollah7017Ай бұрын
Thank you so much for your hard work, easy to understand.
@MasterTheNECАй бұрын
You're very welcome!
@techdave05Ай бұрын
For non-electricians who ask the difference between neutral and ground, I tell them the neutral is the operational ground and the ground is the emergency escape. Most of the time this suffices.
@MasterTheNECАй бұрын
I never want anyone to think of the neutral (Grounded) conductor as anything related to Equipment Grounds. Entirely different functions with specific commonality.
@tim44120Ай бұрын
Man Im so glad it’s people like you out here. Thanks for a very informative and honest review. I Love the fact that I added harbor freight to my inventory and these Doyle tools are great. A lot of brand name tools have made the move to much lesser quality materials and workmanship while toughing their great history. Thats the thing its history.
@MasterTheNECАй бұрын
I appreciate that!
@chinmaysapre6956Ай бұрын
Hello Do you have hands on trainig for electrician projects
@MasterTheNECАй бұрын
No
@billybalentine8065Ай бұрын
Can you use the calculator throughout the whole test
@MasterTheNECАй бұрын
You would have to check with your test center but I would expect any exam that permits calculators would allow them for the entire exam.
@mattboutonnycАй бұрын
if you have an existing meter pan in a 60-year-old house that needs the meter pan replaced. Are you grandfathered in, so you do not have to put the outdoor disconnect or do you have to bring the new installation up to 2020 code? 230.85nec
@MasterTheNECАй бұрын
The "Replacement" requirement didn't get added to the NEC until the 2023 NEC.
@budmanzoom4441Ай бұрын
👍👍
@MasterTheNECАй бұрын
LOL....Haters know they could NEVER pass the CMECP Program so I totally understand those who want to "Live A Lie" and think they actually know the NEC....I know who you are and see your ISP...LOL...I already know you could NEVER successfully pass the rigors of the CMECP Program. Just ask yourself, before you click on anything, what have YOU done for the Electrical Industry? - Mooch off others or have you really done anything....I bet chances are you have not done anything...LOL