That's good to hear - hopefully you will get lots of use from it. They are great machines for rough areas.

Hello, in answer to your question, for the PowerSafe gearbox we recommend UTTO Oil (10W/30) for the standard PowerSafe units, or for the hydrostatic machines a 15W/40 oil.

Thanks for your question. The cutting height is determined by the skids which are fixed underneath the cutting deck. There are two sizes of skids available - one gives a cutting height of 45mm high and the other 80mm. You would need to change the skids to alter the cutting height. I hope that helps.

@tracmasterltd thank you, interesting machine, toying with the idea of supplementing housed ewes during lambing with fresh grass similar to a zero grazing along with their hay and meal. How much grass could you realistically drop in an hour ?

@@charliejlavery sorry we didn't see your message sooner! It's difficult to say as it's very dependent on conditions such as terrain and vegetation. We can arrange a demonstration, either directly or via our dealer network, if you wanted to see it working. We will be uploading more videos too, over the next few weeks.

Thank you for your comments Colin. We're delighted that you're please with your flail mower - and the BCS 740 is an ideal power unit for the flail too.

We are the UK distributor only. You can contact the manufacturers in Italy who can provide details of their resellers for India. Their website is www.bluebirdind.com/

Hi Slobodan. You haven't specified which thread you are referring to, but all threads are undone as indicated in the video. If you need any further assistance please email [email protected] and someone will be able to help. Thank you.

We are the UK distributor for BCS Two Wheel Tractors and Motor Mowers. If you visit their website you can see their worldwide network: bcsagri.com/en-150/sales-network/ I hope that helps.

Thanks for your enquiry. If you go to our website, it has all the information regarding weights of power units and the flail mower attachment. www.tracmaster.co.uk/pages/bcs-flail-mowers I hope that helps and if you need anything else please contact us.

Sorry, I don't quite understand the question. Could you be a bit more specific? Alternatively, you could contact BCS directly via bcsagri.com/it-it/contatti/.

We are the UK distributor only, you could contact BCS directly - their website is bcsagri.com/ they could direct you to your nearest dealer.

The machines can be a little stiff when they are new, and once they are "bedded in" any stiffness should ease up. We would not recommend making any adjustments at this stage. However, if the problem persists you should contact the supplier of your machine for some advice. I hope that helps.

Unfortunately we don't have a video at the moment. It is something we are working on but it hasn't been produced yet. We are happy to offer advice over the phone if you are able to call us. Sorry we can't be of more help right now.

@@tracmasterltd it would be nice to see because I bought 2 different heads with this from you and that’s 3 with the one that’s in it, I have to say I most likely would of changed over and tried the others out but it doesn’t read very straight forward so a quick video would be excellent

@@ArthurBaker1970 it will be uploaded here as soon as it's available, so if you're subscribed you will be notified. Sorry it's not ready yet - these things always take longer than we think they will!

I am subscribed

@@tracmasterltd Another vote for this video.

We are the UK distributor only, so would recommend that you contact the manufacturer, BCS, directly. Or visit their website where you can see all their worldwide distributors bcsagri.com/it-it/rete-vendita/. I hope that helps ☺

Hi Bruce. We recommend using either 80W/90 GL5 oil or a universal tractor oil - both are equally suitable for the PowerSafe units. Diesel should never be used in the gearbox.

You're welcome. We hope you find it useful.

Hi Colin. Thank you for taking the time to comment. We're so glad that you found the video useful, albeit not necessarily in the way we intended 😂. We are working on adding more service videos, so hopefully there will be some more uploaded in the near future! If you're subscribed to our channel then you'll get notifications when we post new videos. Thanks again.

@@tracmasterltd Many thanks indeed for the reply. I have subscribed and look forward to any new videos you make. I wonder if you could help me regarding the preferred transmission oil when I come to replace it. I have seen instructions suggesting the use of a GL5 85W/90 hypoid gear oil but also have a copy of BCS service bulletin 2-22-2016 that suggests, for PowerSafe clutch equipped models, a whole list of possible lubricants all of which are Universal Tractor Transmission oils such as John Deere JDM J 20C. Can you please tell me what you would use.

@@ColinMill1 We recommend using either 80W/90 GL5 oil or a universal tractor oil - both are equally suitable for the PowerSafe units.

@@tracmasterltd Many thanks. That puts my mind at rest.

This is the first we have done but we will be doing more shortly and we'll upload them as they're produced. Was there anything in particular you were looking for? In the meantime, we hope you find this useful.

We have some issues with powersafe clutch flange particularly with pump gears, pump cover. many times we are gacing oil pressure problems to operate clutch working in powersafe models.thanks.

@@ojalamaleI will pass this on to our technical department and see what they can do. Thanks for your feedback.

Hi Dave. Thanks for your question. The most important thing with the PowerSafe clutch is to keep on top of your filter and oil changes. This normally prevents you from having to take the clutch apart to clean it. Typically, oil changes should be done once a year or every 100 hours (whichever is soonest). You would only really need to take the clutch apart to clean it if after doing your service, you still had reduced performance. I hope that helps.

@@tracmasterltd Thank you exactly what I wanted to know. Is there a good engine hour meter to attach to the tiller?

@@davej7458 We have previously used (and recommended) SenDec hour meters.

Good morning. If you contact BCS India - www.bcsindiapvtltd.com/ - they will be able to help you. Unfortunately, we are the UK distributor only. Kind regards, Tracmaster.

Just to answer my own question, having just taken delivery of an electric start 740 petrol with the 85cm flail fitted via a quick connector, it takes 40kg of down-force on the handles to lift the flail clear of the ground. This is OK for me but too much for my wife. However we have ordered the optional 15kg weight kit that should reduce this to about 25kg which is more manageable. The brake cables have some fairly strong return springs that make the operation of the differential brakes somewhat harder than needs be and I plan to fit some lower rate springs to ease this problem as well as add stops to reduce the brake lever gape to something small hands can manage more easily.

Hi Frank. You could try contacting BCS America www.bcsamerica.com/ or Earth Tools www.earthtools.com/ who might be able to help you.

@@tracmasterltd thanks for responding! I called bcs America, and emailed them. They dont have them available. Earthtools is a good idea.

You're right, sorry! This is one of our older videos and does need updating.

It might be worth you contacting some of your local dealers? They occasionally have trade-in or reconditioned demo units. Our dealer locator is here: www.tracmaster.co.uk/tools/find-a-dealer. Good luck!