Built Different Garage

Пікірлер

@dcorthell 8 күн бұрын

Did you cut the front stock bumper on it? Looks great! If so you got a video on it?

@alexbouchard3880 9 күн бұрын

You have bigger than stock tires and you were in it for the weigh. If anything you may have made it lighter

@jesseburrows5595 13 күн бұрын

If you wanted to make the antennae holder stronger and easy to make. The slot isn't necessary. Drill a hole, put the grommet in, and just slip it over the antennae before you screw it to the jeep.

@AUXITOLED 15 күн бұрын

Another solid video, Bro. We released a portable Jump starter. Can we invite you to do a review? We have emailed for an inquiry.

@kollinknack9288 16 күн бұрын

Hey man is there any chance you’d have a measurement on how far back the rear of your tub is from the rear edge of the door? I’m looking at doing a similar build with my TJ and I like how your cab came out, but I can’t seem to find a measurement in any of your videos on where the rear of the cab finally ended up. Thanks!!

@BuiltDifferentGarage 15 күн бұрын

Hey, absolutely! I measured from where the edge of the door and the tub stops for the belt rail. It’s right at 11 3/4in. Hopefully that makes sense haha. If not, send me an email [email protected] and I can provide pictures and measurements there.

@kollinknack9288 15 күн бұрын

@@BuiltDifferentGarage Thanks a ton!! I’m pretty sure I understand where your measurement is coming from. If you’d be willing to send me a picture, I’ll send you an email right after this just to confirm where your dimensions are from. But I wanted to compliment you on the way the Krute turned out. It’s really flippin cool, and I absolutely love the inspiration for my own TJ build. And I wanna make my cab and hardtop look like yours, it just looks correct. The AEV kits make the cab and top look too long IMO. But how’s the seating room?? Are you able to adjust your seat all the way back and lean it back a little bit? I’m 6’8 and it’s tight as is, I lean my seat back to fit better, and I’m just a tad concerned about it being too tight cutting the cab like yours. Again, thanks in advance, and I’ll get with you over email!

@waeelsaleh3216 20 күн бұрын

279k

@maz3588 21 күн бұрын

Now this is the type of video I like. A guy that is honest shows you how he gets something done ,and it's not done smoothly. So we know what we're up against. Keep the videos coming. Mike from the UK.

@BuiltDifferentGarage 21 күн бұрын

🤟🏼 always trying to keep it real! Thanks for the support!!

@davidslater8687 24 күн бұрын

I've had my '03 for about a year now. I've typically had sports cars from Cobras to my most recent, '93 GTR as dailys. This thing is by far my favorite daily I've had. Even at 223k miles the wear on it, if any, has held up better than even cars I've seen with 1/4 the mileage and still drives smooth and comfortable. Toyota really knew what they were doing with this. In regards to the AHC, I absolutely love it. In all reality, the stock suspension will outlast traditional coil and shock setups by a long shot. I just had to replace the accumulators and fluid, $450 total and 2 hours of my time. Now I got another 200k miles on the setup, it rides like a cloud, and still adjustable. I highly recommend keeping it if anyone's considering deleting it.

@patriotsleepercell4060 26 күн бұрын

granedier has a fking BMW engine thx but no thx

@Docudate 28 күн бұрын

I have a 2004 GX470 with 150000 miles. It is a one owner car always in Arizona. The chassis notification came on and now the back wheels spin independently from the front wheels and the car drives poorly. I can go forward or backward but turning is difficult. Does anyone know what is wrong and about how much it would cost to get it fixed? Before this happened, I could feel a vibration. Thanks for your thoughts

@tonyparson4392 28 күн бұрын

Where did you order those long nozzles?

@fredeschen3783 28 күн бұрын

Just go for a rip down a bumpy road and it will self clearance 🤓

@BuiltDifferentGarage 28 күн бұрын

Lmao I’m sure it would

@delvega1975 28 күн бұрын

would using 2x6" rectangular tubing be superior to 2x4? I'm not concerned with the extra weight or cost. I'm just wanting more meat on the chassis frame. Or would that make it too rigid? Thanks for any feedback

@tdg0101 Ай бұрын

Good stuff. Make it work for now solution.

@BuiltDifferentGarage Ай бұрын

Yep!

@maineiacoffroad9969 Ай бұрын

Dropping a TJ fuel tank is easy compared to the 38 gallon tank on my 7.3 F-350.

@BuiltDifferentGarage Ай бұрын

Hahaha I’m sure it is!

@vicgustafson8514 Ай бұрын

Tennessee has converted you. Lol Welcome to our new channel .. Redneck Engineering. Lol

@flintlock_glockTJR Ай бұрын

Dude. Grab yourself a harbor freight or pawn shop atv/motorcycle jack. Makes gas tanks, trans, t-case, etc way easier. You'll get this to work. Just a speed bump

@BuiltDifferentGarage Ай бұрын

Interesting, I’ll have to look into that. I thought about building a cradle for the tank out of wood but too much work lol.

@Chansen231 Ай бұрын

Next time to drain the fuel pull fuel line at the rail drain on to a gas can and stick a paper clip where the fuel pump relay is. And let it pump itself dry.

@BuiltDifferentGarage Ай бұрын

That would have been much easier and definitely made the tank lighter. Appreciate that!

@Kingducko85 Ай бұрын

He’s back 🔥🚗❤

@BuiltDifferentGarage Ай бұрын

100%!

@oztjwrangleradventures5916 Ай бұрын

Well that's a bummer. I've been looking at these new tanks from Barnes. They look great and it's good to know how they fit. I'm sure you'll figure out an easy way of mounting it. Looking forward to a wheeling video.

@BuiltDifferentGarage Ай бұрын

All good! And definitely, no fault to Barnes. The product is perfect for what I need but my frame is the cause of no fit. The Barnes tank is a great solution regardless.

@reincarnated_as_a_slime Ай бұрын

shame the new part did not fit in the spot but as you said you iwll modify it to make it work. so good luck on that and have fun.

@BuiltDifferentGarage Ай бұрын

Thank you! We’ll get it modified and fit snug up in there!

@markchiaramonte1892 Ай бұрын

where is the best place for the ground wire??

@johnnysmack806 Ай бұрын

What size lift are you running?

@diegomendez7647 Ай бұрын

Hola amigo que medida de Tires tiene?? Saludos

@jgcruisers Ай бұрын

295k

@calven727 Ай бұрын

What is this wizardry?

@usmcmsgt5487 2 ай бұрын

19:20 I can appreciate that. ☝️😊 🇺🇸

@usmcmsgt5487 2 ай бұрын

8:35 So yyou're saying you drink and drive? 🍺 + 🛻 = 🚔🚓 😂😂😂😂😂

@BuiltDifferentGarage 2 ай бұрын

@@usmcmsgt5487 😂😂

@usmcmsgt5487 2 ай бұрын

I was thinking you'd have millions of views if you put it RTT on the roof, and it started to slide down the front of the vehicle. 😂😂😂😂😂 The angle looked like it was a possibility. 😂😂😂😂

@BuiltDifferentGarage 2 ай бұрын

@@usmcmsgt5487 hahaha probably!

@MB-ox3cz 2 ай бұрын

Dude, quit comparing the king of the offroad to a Jeep... Jeeps are prehistoric and pathetic. Even today, Jeep still cannot make a vehicle which half of what the 100 series is. Adjusted for inflation this was $100K+ SUV.

@BuiltDifferentGarage 2 ай бұрын

👍🏼 It’s not that serious

@douglaschu2000 2 ай бұрын

I have a 1999 Lx470 = there is a cup holder in the back seat - push on the panel at your feet just below the front arm rest console and the cup holder will pop out. I love my Lx470

@ShelAnne-y3r 2 ай бұрын

Too much selling & talking.

@BuiltDifferentGarage 2 ай бұрын

Then don’t watch😂😂

@azfersaeed1602 2 ай бұрын

Sellout 😂. Just kidding, glad you saw the light, welcome! In all honesty, each offroad SUV has its use case. Jeeps are great in the US because they offer the most customization options. Lexus/Toyota come close but they are bigger and not as maneuverable on tight trails.

@BuiltDifferentGarage 2 ай бұрын

😂😂 I completely agree! Each has its own purpose!

@mmNola 2 ай бұрын

Mileage -- I'm going with 278,389 because that's the mileage on my 2000 Land Cruiser 😊

@JamesMcNamara-j1g 2 ай бұрын

I dig those KC bars on newer rigs, or dedicated off-road CJ’s but it looks too “trophy truck” for my build.

@JamesMcNamara-j1g 2 ай бұрын

Just found your channel looking for info on hard top repairs. Love what you guys are doing, BUT shop banter is always 100% better than weird noise ( in the back ground ) every time

@1983sccoupe 2 ай бұрын

We are all so glad you included the real "project manager" in this video..... We need to see more of the Mrs. helping you get this project done....

@BuiltDifferentGarage 2 ай бұрын

Absolutely, I agree!

@Milks02TJ 2 ай бұрын

Takes a mess to make progress from time to time...

@brianfox830 2 ай бұрын

Great video!... Just purchased the exact same vehicle, literally... Curious, what brand/size are those tires?... Would love to put the same ones on my LX470

@hectorvelandia3782 2 ай бұрын

I cover the inside of my tj top from a suburban liner, paid $20 bucks at the junk yard, comes with thing foam and fabric that match de interior color of my jeep. I attached with 3M rubber glue and to curver i warmer up the area first and then use a small rubber malet.

@reincarnated_as_a_slime 2 ай бұрын

awesome loved the info on the build so far.great job keep it up love how you and your son get along and work well together. remember having fun is the way

@Milks02TJ 2 ай бұрын

They are Rock- Rings for a reason......

@BuiltDifferentGarage 2 ай бұрын

lol I know this… it’s not a serious post

@Milks02TJ 2 ай бұрын

@@BuiltDifferentGarage figured as much! 😆 🤣