VR&R

Пікірлер

@bryancarpenter3648 3 күн бұрын

Made for all out motocross. Basically a works bike from the factory. Pretty sure that was the model that won the usgp motocross world championship.

@tengzturiagaiii3185 20 күн бұрын

I assume this is the same processe on 2004 ram 5.7 hemi?

@mrray7792 Ай бұрын

Thin the oil with wd40 or mineral spirits

@generallyspeaking8089 2 ай бұрын

Can u change all the front bulbs that way? Or just the highbeam?

@danielalberto4995 3 ай бұрын

Tuve exactamente esta moto, ese azul era espectacular, el andar, la reacción para la época, excelente en todo, de lo mejor en su gama. Si la encontrara en ese estado la compraría nuevamente.

@jwire4532 4 ай бұрын

I have the same bike but with 1000 miles only!

@jser4822 9 ай бұрын

That ultrasonic cleaner is hoax. I’ve clean 100 carburetors with compressed air and carb cleaner never had issues.

@FromSaultoPaul 9 ай бұрын

AWESOME as I have a Moto 4 but an 86... Just what I needed. It is my first ATV at 61..... Excite as a little kid. I rebuilt the motor from the jug up with new valves. Bought it for $600 and I have $600 into it as it should last me a long time. Watched a LOT of KZbin's to do this... I will use the Yamaha oil that was meant to go into it BUT will change it more often. Like 3 to 4 times a year. Spring, mid-summer and fall as I will put a lot of miles on it but easy miles, NO hill climbing.

@MrSklurk 9 ай бұрын

Yeah but there’s a high beam and LOW BEAM!

@thomaspike2119 10 ай бұрын

I have a no 5 Dodge hemmy out of a 1500 pick up truck. I wanna upgrade my coil packs to the coil. Dual spark plug single application rather than the crosswire. One is thit's just not a good idea and i'm gonna Put it in my airboat with a standalone computer

@boomboomkawabanga 10 ай бұрын

How much horsepower on these?

@donaldvagi8150 11 ай бұрын

What was the compression for the piston I’m getting ready to put a 11:1 in mine

@vrr6513 11 ай бұрын

I think that is what it was

@evanvevan Жыл бұрын

Looking into picking up a purple one for myself!

@thatswhatusdovesdo Жыл бұрын

How cute one spark plug per coil 😂

@Brian-my3gd Жыл бұрын

Did you have to pull the head back off and reposition that timing chain guide?

@smileyman-zt3vl Жыл бұрын

I have the same bike, but the kill switch is two wires you touch together lol

@MidnightPolaris800 Жыл бұрын

Beast

@garetolsen Жыл бұрын

what did u clear the clog with?

@richardweyland116 Жыл бұрын

2007 had two plugs per cylinder and no plug wires.

@elpicucoamo8992 Жыл бұрын

Ok great nice video of you moving here and there but you absolutely show nothing for anyone to learn how to change those coils great job

@markchidester6239 Жыл бұрын

Hmm. I just learned how the wiring connector released on this particular system.

@surfinairwaves9284 Жыл бұрын

Have one exactly like that I just bought it, and love it

@Alex-kz4ro Жыл бұрын

Tell me, please, the tightening torque of the cylinder head, so as not to break the thread, what is the distance of the thermal gap between the piston and the head? Thanks yamaha raptor 350

@jirislavicek9954 Жыл бұрын

Lovely bike! And has all classic bike should have. Nothing less, nothing more. Love the spoked wheels. 👍

@ethtt Жыл бұрын

You could have just reached down from the top without having to take anything off for the left side low beam. You would have to go from underneath for the right side though

@efraimrios4285 Жыл бұрын

Hey guys, on the wheel well in front of the tire there is a swing panel that says headlight access. It literally takes 5 minutes. 😂

@brian3387 2 ай бұрын

I have a 2009 and this is true!! I don’t do well working on cars, but in 10 minutes the standard headlight bulbs were replaced on both sides and tools (the single short Philips screwdriver I needed) were put away! Thank you so much for commenting this!!!

@XXXCRSPL Жыл бұрын

Great job!!

@XXXCRSPL Жыл бұрын

You can use a piece of fuel hose attached to the valve and chuck it to the drill works Great!!

@fishingman5977 Жыл бұрын

Super 👍

@ChaseFletchall Жыл бұрын

I’m no expert, that’s why I’m watching the video but the folks at the Yamaha dealer in town tell me you should be using an oil that is compatible and designed for wet clutch applications. Like a Yamalube or motorcycle type oil, not conventional oil. I guess the additives in the conventional oil harm the clutches. Just thought I would pass it along!

@vrr6513 Жыл бұрын

Thanks good to know !

@kellsarah Жыл бұрын

Rotella 15w40 diesel oil has the JASO rating for wet clutches, this I what I usually use in my bikes.

@MR.DODGEgeek508 Жыл бұрын

@@kellsarah good because that's what i got before i thought to look it up on the you tube universality.

@brewserXxx Жыл бұрын

Know what you should review next? Brooms and dustpans.

@dillongrimes1559 Жыл бұрын

I've changed my headlights on my MKZ probably a dozen times and I've never once had to remove the tire even if so why won't you just turn the wheel to access the bulb seems kinda retarded to me

@hunterb1215 Жыл бұрын

Finger tight on the tensioner

@hunterb1215 Жыл бұрын

It's been awhile

@hunterb1215 Жыл бұрын

Good job ! Helped me out !

@hellnell-gq1lg Жыл бұрын

They were named Greyhound 6.5Hp 196cc I have 1 But mines is the original 2009 HF 5 bolt valve cover Head I hate that part I should change the head like they did yours

@Deucealive75 9 ай бұрын

The engine in the video isn't a Greyhound. If you notice it has a clone block. The Greyhound did not have a clone block, and you mentioned the 5 bolt head. And the Greyhound did not have a standard clone gas tank. HF sold clones prior to the Greyhound, but I don't recall what they were named.

@michaelelse9328 Жыл бұрын

💥 S 💨 A 💨 V 💨 A 💨 G 💨 E 💥☮️ Best wishes from Germany! ✌🏻🕊☮️

@CoopDeViLLeOG Жыл бұрын

Great video but you don’t need to take the tires off. I mean it gives you plenty of extra space but I done my 2012 MKZ without taking the tires off. Just turned the wheel and reach up there. And the driver side lights were the easiest to change. Took me 10mins to change low beam, high beam, and fog lights on the driver side. Passenger side was a pain tho. Took me the longest I’ll admit.

@MistaaFrosty Жыл бұрын

did you have to adjust the light for good range on output?

@vrr6513 Жыл бұрын

Yes

@wereallydontknowwhatweredo5038 Жыл бұрын

Cool video! Learned a lot! Thanks For sharing😊

@gaboonv1per 2 жыл бұрын

Yeah nice find, what's going to happen with this??? Thanks for the video.

@palermoVmusic 2 жыл бұрын

Damn… taking the tire off the change headlights. They’re really betting every Lincoln owner is just gonna take their car to the dealership everytime😂. Doesn’t look too bad beyond that though.

@vrr6513 2 жыл бұрын

Haha probably

@CoopDeViLLeOG Жыл бұрын

You don’t have to do all what he did. He did twice as much work. Don’t even need to take the wheel off.

@tahree-amir Жыл бұрын

@@CoopDeViLLeOGhow do you do it without taking the wheel off

@CoopDeViLLeOG Жыл бұрын

@@tahree-amir turn the wheel all the way to get enough clearance, pull the 2-4 plastic push/safety pins on your plastic protective wheel liner and reach up behind it and you can reach your low beams easily. And to get to your fog lights, just take off the plastic skid plate or whatever it is under the front bumper. You can’t miss it. I suggest having those ramps you ride up on. It’s makes it a lot easier. It is a lil bit of a hassle but if you have some simple tools and ramps it’s really not that bad. However the high beams are really hard to get to. I actually haven’t been able to get to mine because the A/C lines are in the way. But anyways hope this helps.

@tahree-amir Жыл бұрын

@@CoopDeViLLeOG bet. And the low beams are just the regular lights, right ? My shit just went off on me. So I want to know which ones to get

@brucewatkins3347 2 жыл бұрын

You should have left a gap for the weld to set in. After grinding there wasn't much weld left.

@Detailing849 2 жыл бұрын

When you were measuring the piston ring end gap was the 0.20 to 0.40 in thousands of an inch

@vrr6513 2 жыл бұрын

I think so , hard to remember this was over a year ago you might have to check a Manuel

@Detailing849 2 жыл бұрын

Ok thank you 👍

@sharonbarnes4260 2 жыл бұрын

How do I find the part number for that coil pack?

@vrr6513 2 жыл бұрын

I just looked up the year model and engine type on eBay and ordered them, much cheaper than napa

@roryk.3568 2 жыл бұрын

Lube lube lube. That wristpin bushing probably got smoked on startup. Great job on build, just need to use that lube. 👍

@Evadingmoto 11 ай бұрын

Does the wrist look bushing (the bronze part one in the rod) does it spin? (Mine does)

@husq48 2 жыл бұрын

Should you use some type of grease on the connectors, to keep moisture out?

@richardweyland116 Жыл бұрын

yes.

@fyou2327 2 жыл бұрын

How about mixing the waste oil with diesel and even heating the mixture up before spraying. I've heard a bit about melting paraffin wax in the warm solution too so it really sticks.

@christophercoleman7748 2 жыл бұрын

Great video everything I needed to see and every question answered

@syl3472 2 жыл бұрын

Just got me one, can wait

@benatkinson2775 2 жыл бұрын

You need to learn how to install the rings on the piston, you shouldn't open both ends of the ring and force it on. You start with one end and walk it round.

@vrr6513 2 жыл бұрын

Thanks for the advise!

Ең жақсы KZbin

Пікірлер