What is main problem when cylinder shaft not returning back? Please let me Answer

Thank you very much for this demonstration of the valve. It helped me a lot. Greetings from Bavaria/Germany 😊

good time

What is the joy stick controller you are using?

Thanks !!!!!!

Thank you so much!

Why does the solenoids have a ground wire? is this for safety or some other reason like grounding any static from the air going through it? Pease advise and thanks for the vid.

Bhai cnakishan bat do

Thanks, but my main questions are still unanswered. Why is it called “DIN” when that usually refers to a connector with circular terminals? What is the point of the whole “electrical entry” thing when it doesn’t seal against exposure, doesn’t provide strain relief, and forces a right-angle? It’s a common design so there must be something I’m missing.

Hello sir iska connection penel Box me kaha kare ?

bad video.. without diagram only black screens

Can u directly connect to a power supply after this?

What do you call that stick

Thank you so much for this, you saved me a lot of time and confusion.

Ничего не понятно, но очень интересно.

I have to use the ground wire for commercial application, but can't find where to attach it anywhere inside this housing. Can you help?

I am looking for a solution for my arduno project, I need 4 switches that need to be controlled individual. (Block objects) buts in a coolcel so ordinairy electronic switches might rust. To avoid that I was think maby I can use a pump from a car central lock system but that controls all 4 doors at once. Not individual. Could this do that?

The moment I heard the piano playing I knew this video was going to be special!

Can you help me, all I want is a 2 port solenoid and to be able to control the flow remotely with a electric dial or swicth. I want to be able to adjust flow to a stop or open flow all the way of a vacuum line. Of course a mechanical 2 porttroller will do exactly what I want but I can't control it remotely. My idea will likely need a 3 port mac solenoid in the future if my idea is not working. I'm making something very similar to a wastegate with a light spring but using check valves to hold pressure and bleed it off at different speeds to adjust how fast it bleeds off pressure. Could I use a 3 port mac solenoid and plug a port then use a pwm dial controller to adjust the amount of flow?

gicdillaxsan, emi?

What a waste of time music is shit video is shit

Super now it's clear for me thanks lot brother

Hiii bro.. nice

is there a difference between a "pilot piston solenoid valve" and a "pilot operated piston valve"? or are they both the same thing?

How can we convert 24V DC valve to 220V AC ?

Good instructional video for wiring the pneumatic solenoid valve. What’s with the annoying purring cat sound throughout the video though?

It's the only video that actually demostrates the manual override and how it works. Excellent thank you for your time.

Awesome, thanks!

can you tell us how to connect this with gas tank?

Mujhe lena h kaha milega

Berapa volt airtag ?

Apakah di Indonesia ada agen penjualannya ?

Hey everyone, If you have more interest in products like this then kindly visit the link below Here is Our Product - Screwed / Socket Weld Ball Valve check it out - uflowvalve.com/site/screwed-socket-weld-ball-valve.php for other Products detail kindly visit our Website - uflowvalve www.uflowvalve.com/ Uflow Automation

Connection me 24v ki jagah par 0v lagaye to kya hoga

Yow

Saya mau beli alat itu di mana ya tempatnya plies infonya

How would you reccomend to clean the filter in one of these? Is a degreaser sufficient?

Except the bongin music I don't think anyone should give you a thumbs down Good how to, thanks

What is the name of that controller?

Sir 5/2 solenoid valve/coil me water jatahe to kya hoga or us problem ko kese thik kare

thank u very much this video is most help full.

where can i buy this ?

Words

thank u

Thank you

Great video. Just what I needed. Thanks.

Could you wire it to DMX???

Is this device works the same as paddle air toggle from air suspension?

Hi thanks for the great video, want to ask why the magnetic ring inside my cylinder always broken.

How to set Bypass