Very kewl pet man. She was so fun to watch attack her prey.

You see that Kanga tire hook line.. It was my last vid other then this one. CRAZY line man.

This lil cat is hilarious. Total ninja when its dark with all the mischief tactics :)

Id bet that would of taken a while to get used to. I know for the first week I was constantly checking to make sure she hadnt gotten out. lol

​@@DurpVonFronzshed collect widows everywhere we went too. I hate spiders! She was actually my prom date too lol

Turns out they are really kewl pets. Very awesome to watch and u know how it designs its environment its pretty intelligent too. When I dropped crickets in and she would pluck strings to know where they were was one of the kewlest parts, and then of course the capture.

It was pretty crazy man, was so unsure of her and if she got out for the first while, but after u realized she couldnt get out it was one of the kewlest pets Ive ever had. Very awesome to watch her do her thing.

Thanks Wreckem! Was pretty fun creating that line just for this rig. Took a few tries to get it right and couldnt believe it could pull it off :) And that tune is crazy rare as well. Its off a compilation CD some artists made called A Tribute To Alberta : Rivers and Rails. Cost 90 bucks when I finally found it on amazon lmao

Thanks RC Birbs! Was crazy tough to make it just right so it could pull it off :)

Thanks Radio man! Its a totally crazy line. Anything stretched out that much is going to be awesome. This Kanga is just glad front and rears and its pretty dang amazing. Going to put some Moose Racing Axles onto it here in the next week or so when they show up. Going to get that sick 52degree turn angle.. going to be nuts. Oh and some new brass wheels as well. I can make u some Cut and shaped lead sticky weights for that rig as well. Adds about 100g to the lowest, widest part of the rig and really really helps keep it planted. Ive still got a ton of those sticky weights and Avalon no longer sells em, they are now steel and cant be cut and shaped at all. :(

@@DurpVonFronz Cool, are you talking the Meus axles or are these Moose axles ones i have not seen yet? I have a bunch of weights also, picked some up from Al a week agohe had a bunch instock right infront of the till. i am going to be using a portal axle set that was sent to me to test so we will see how they perform, i herd the first verson was not so good for drive shatf angle so we will see if they have fixed the issue. I will be doing a video on them as soon as i get to the build.

Yea they are the Meus ones, pronounced moose.. lmao Yea the ones Al sells now are all steel and cant be bent or cut easily. Portals are awesome man, LOVE the Treal Portals on the Glad, thing can go just about anywhere now with that extra 39% clearance!!

@@DurpVonFronz The Meus axles are awesome looking, but the price is crazy, guess you pay for the extra steer angle!! Look forward to seeing them on the Kanga!!

Yea the set isnt to bad, but 2 fronts are like 167 bucks on amazon. The Treal portals are even more, like another 20 bucks but are amazing and have really awesome steering angle as well. But the clearance is where its at with those, and the quality is unmatched. 7k grade alumium. Very nice stuff.

Thanks Jack man!! Woot Woot!

Thanks Jack man, had to make a line just for those tires to see if it would work. :)

But... its got what plants crave :)

Thanks Urban! Was tough to get that line to work.

Its got what plants crave.

Thanks Donna! :)

Thanks!! Cant believe where it can go :)

Thanks Jono!! Such a crazy lil rig.

Thanks!! Craziest lil rig!

Thanks, craziest tires Ive seen yet at the 1.0 size :)

Thanks Kou!! This lil rig can pull off some crazy lines. :) Check out that Danchee, its very fun.

Thanks Jack man! Cant believe the lines this thing can do. lol its crazy

Thanks Jack. Squishiest tires Ive ever seen or heard of. Blowing my mind how soft they are and how they torque twist it up. lol

I think it might actually as the mount it comes with kinda centers it unlike how the micro is offset to one side.

Id get some brass injora wheels with the lead weight mod that I do, should make the wheels around 75g a piece. That is the one thing keeping my Glad planted and its on portals. I personally think its one of the keys to having a rig that runs properly and staying planted. Get some brass knuckles and maybe some brass links as well, but those arent really needed if you get the wheels over 75g a piece with rubber. My glads wheels with tires are 86g a piece. Ive got a ton of the lead weights if you want some, I can even cut and shape em for ya too.

Oh yea this thing is insane at crawling. Never seen another rig do what it can, more so with these crazy azz tires now. Its doing lines it couldnt even attempt before with the 57 and 58mms. Its so fun just seeing what it can get over and around now. Its become a new rig imo with those sized tires. Also never seen tires twist like those BlackLabels either, crazy at keeping traction vs just slipping and spinning.

@@DurpVonFronz Maybe i need to pick up that chassis and swap it with the one i am unable to improve. might be the the large mud slingers combined with the potals, but i gotta do something with it.

Id put money on its the wheels, probably alumium, need the brass with extra weight inside. Id also opt for some other tire then those mudslingers, I think they are one of the worst tires, Ive got a set and I dislike how poor the performance is from em. Get as much weight as low as you can with that thing and see how it works before changing it up to much. Id bet it just needs some killer heavy bottom end. :)

@@DurpVonFronz Ya i have a set of injora pins with some brass wheels, i will give them a shot and see if it hold better.

Thanks!! :) Was pretty fun to hook that line.

Thanks Rc Birbs! :)

Man there has been so many times doing lines off camera that work, turn it on and boom, just fail after fail until the camera goes off again.. Lmao

I only use the stock ones. Then if someone comes over everyone gets to use the rig without having like 5 rigs on one transmitter. :)

@@DurpVonFronz word im back using the slt3

It was an insane line, cant believe it can pull stuff like that off. So awesome to do. :) That Ax24 in the stock chassic couldnt do anything like that at all.

@@DurpVonFronz yeah im running the injora carbo fiber chasis rails but added frame extensions ( i made from the og chasis rail i cut in half) and im totally impressed

As soft as it is before its goes hard. Yuck... Lmao

Woot Woot !! :)

Thanks Radio man! :) 3GearRC did a vid on em a while ago right after rain. Tires hooked up like nothing Ive seen before. Knew they were awesome back then so I just wanted to get my own set as the Kanga Ax24 needed bigger tires and didnt want to just get another set of SwampKings :)

@@DurpVonFronz I may need to pick up a set also, i am going to also try the JConcepts Megalithics 1.0. i love my 1.9's so figured I would give them a go.

They are an awesome tire, so are the SwampKings from LGRP. :)

Dont really need to do much to this thing anymore as its nearly as good as it can get. Just checking diff tires as the rest is unreal awesome :)

Thanks Dude! Craziest Tires Ive seen yet. Totally thought the Trenchers were unreal, these are a level above that. Cant believe how they hook up.

1:50 of this thing is hilarious compared to its former suckage

Thanks!

That would look kewl! But I think I want that massive 527 motor out front for all to see :)

@@DurpVonFronz like the old dragsters kinda

Thanks Jono!! Just ordered a 527 resin printed motor to sit out front! Going to be powered by a 2000Kv Fat Viper :) Should be awesome on 3s :)

Yea that is a good idea. Might just have to bend the C frame rails and raise the shock mounting points that way :) Good call :)

@@DurpVonFronz glad you like it. Here's the correction of my big finger mistakes: before, springs, eye. Sorry

@@DurpVonFronz glad you like it. Here's the correction of my big finger mistakes: before, springs, eye. Sorry

Ooo, that is also a good idea too, might try that or bend the C frame rails to get that height adjustment from it, thank Blitz! :)

I think its going to turn out pretty dang sweet :)

Thanks Radio man! I went with that Fat Viper from the reviews and its purple, how kewl. I got the Injora brushless ESC cause it was cheap and the reviews said its very similar to the Lizard pro. So why not give it a try. For the radio, Ima just buy another V1 scx24 style so I can use a remote from another rig and just rebing when I use it. Im thinking those lil Injora motors are going to be awesome man, pretty good price and they are looking like the Furitek stuff just without the app. :) Peace!

@@DurpVonFronz So you are going to de-case the V1 ESC to save room, that alot of electronics to place, Injora need to build an all in one ESC to go with there motors so you don not need to find room for the reciver. looking forward to seeing it in action. i have the Reactive Terrain Goat Zilla chassis i won on one of their lives i need to build. its tight for space so need to find the right setup for it, was thinking the injora ECS and Ninja just not sure it will all fit.

@@radioactivescalerc Yea, totally going to remove the cases from the stuff, might even use some of the wires to show off, like have em pop outta the hood so it looks more fury road style. With that Ninja Goat thingy mah do'er Id go with the smallest Esc u can find and a micro komodo or the Purple Viper from Injora.

Could end up being pretty rad. :)

Woot Woot, Np man. Best kinda vids to share imo :)

Gotta keep things where they should be.. lol so dont forget the Gorilla Glue Super Glue :) Stuff is like that E6000, so stronk!

Thanks man! :)

Thank you sir! :)

Thanks Alex man! Yea, Ive been wondering about that Brushless ESC but its not like other ESC which makes me not want one. I think the Lizard is by far the best and it comes with an App for the phone so u can adjust on the fly. Love it. But all that being said Id like to try the new Fat Viper brushless from injora with their ESC :) Might be decent, anyways Peace dude!