Lean-to Customs

Пікірлер

@craigkopcho7394 Күн бұрын

Weren’t they 6 volt positive ground?

@lean-tocustoms7910 Күн бұрын

@@craigkopcho7394 yeah, but this one had already been converted to 12 volt before I got it.

@brucehorton-pc2pv 5 күн бұрын

Looking good.

@jaym6325 7 күн бұрын

Do you have a completed video w shocks installed? I'd like to see how you installed shocks. I have a 67. Same frame.

@matthewrusch477 9 күн бұрын

Looks like I'm about to jump into this project on my '98 Burb. Glad I came across your video. Did you have to do any extensive bleeding of the system after the replacement?

@lean-tocustoms7910 9 күн бұрын

@@matthewrusch477 Nope, I didn't break any brake lines loose, and the power steering system just pushed all the air to the reservoir, so I re filled after it ran for a while.

@wendykarr287 14 күн бұрын

What are you going to use a tractor for??

@lean-tocustoms7910 13 күн бұрын

@@wendykarr287 tractor stuff

@ventues9751 18 күн бұрын

I fad this exact same Chevette !!!

@BlancoLobo 26 күн бұрын

3rd gear was almost a money shift !

@lean-tocustoms7910 26 күн бұрын

@@BlancoLobo nope, that what 3rd sounds like shifting slow. Lol I think something is bent in the trans.

@zachm2021 Ай бұрын

Awesome video my dude! Love the v8 Chevette. I don’t know how it only got 54 likes though . I’d love to have a ride like this

@MemphisCustoms-yp8ot Ай бұрын

How much cutting was required to get the t56 in?

@lean-tocustoms7910 Ай бұрын

@@MemphisCustoms-yp8ot I ended up cutting quite a bit of the tunnel out to get the trans up higher in the rear, I think I went over it in a later video.

@donthewellguy 2 ай бұрын

This is how I hope to get my 1981…. 👍🏻

@donthewellguy 2 ай бұрын

Nice!👍🏻

@rickybailey7123 2 ай бұрын

How fast is it ! Ok 41 mph thats rolling for a jon boat so cool !!

@BlancoLobo 2 ай бұрын

I have been eagerly awaiting the shed pull video. ! Thanks for posting it

@Thugsidekick 2 ай бұрын

Which Bags you installing because i get two different people tell me to put the SS6 & some body else telling me to install the S7 I already noticed the frame I don't want to make a mistake buying the wrong Bags. Thanks if you can share the information.

@locker1325 3 ай бұрын

Wow. That's a lot of video of just boating. If the point was speed then tell me what the speed was before and after. Maybe display the speed onscreen.

@lean-tocustoms7910 3 ай бұрын

@@locker1325 the speed was slow, water was very rough, I'll look into getting the GPS speed overlay on the GoPro footage tho. Thanks

@Rottingboards 3 ай бұрын

What the hell? Did the Buick pull a Christine and fall on him? No PART 2!

@josephdangelo1503 3 ай бұрын

I have just a plain Jane k2500 and I'm having a problem separating the motor and transmission you said it has 7 bolts I know the hog head bolts they hold a lot of brackets and grounds it appears that there is a bolt on top by the oil sensor and there's no bolt in mine but I'll be damned if I can get that thing apart. Do you have any suggestions have you ever came across something like this???

@lean-tocustoms7910 3 ай бұрын

@@josephdangelo1503 without seeing it it's hard to say, if the brackets that go from the trans to the motor mounts are loose and the 7 bell housing bolts are out then I not sure what it could be .

@josephdangelo1503 3 ай бұрын

@@lean-tocustoms7910 wow I really appreciate you answering me so quickly. The only thing I could come up with after watching a few other videos mainly Eric on South main Auto and he was actually pulling a 5.3 but it was a k2500 the dowel pins were stuck on his motor that he was pulling aluminum trans and steel and of course a vortec being steel itself, those two metals don't interact very well. I'm surprised yours came apart so easily but then again you were pulling in apart I guess a second time. Anyhow brother thank you so much for sharing your video you and your family take care and God bless

@DanielEDugger 3 ай бұрын

The tach might just need to be adjusted,if the old motor was a Six or four cylinder, there is a small dial on the back of the tach that can be "clocked", to the right amount of cylinders 😊❤!?

@lean-tocustoms7910 3 ай бұрын

@@DanielEDugger I tried all the settings on the back of the tack but the needle never moves so I assume it's burned out. I do have power and ground going to it also.

@DanielEDugger 3 ай бұрын

@@lean-tocustoms7910 it's just old like me!, I don't think my needle moves any more either!👍😕😁

@briangiller5253 3 ай бұрын

You in the telecom industry by chance?

@lean-tocustoms7910 3 ай бұрын

@@briangiller5253 nope

@buddylee6477 4 ай бұрын

you could take a side cover off and take it to orieleys paint store and get it color matched in a spray can

@lean-tocustoms7910 4 ай бұрын

@@buddylee6477 Yeah I thought of that, but I was ready for a change. Lol

@buddylee6477 4 ай бұрын

wow i can see your motivation now .. that crazy $$. they will never get that . i doubt it. best of luck bro

@buddylee6477 4 ай бұрын

just buy another tank

@lean-tocustoms7910 4 ай бұрын

@@buddylee6477 after checking online and only finding one, that was $1000 I decided to fix this one. Thanks for the idea tho.

@kevinbarrow5396 4 ай бұрын

This is a bucket list car for me!

@BlueWeaselTX 5 ай бұрын

What happened to require all of the welding on the bottom?

@lean-tocustoms7910 5 ай бұрын

@@BlueWeaselTX that was the transition from the boat hull to the jet ski hull, trying to make it flow nicely.

@gsftom 5 ай бұрын

That thing moves. Nice job.

@jasonwhitaker5173 5 ай бұрын

What kind of speeds are you getting out of the boat now? Especially when the water is this still.

@Tealmoney8571 5 ай бұрын

I like it! Looks cool with the wheels. I'd have to slam it, but I'd drive it!

@tobycross4935 5 ай бұрын

thanks, great video, i watched all the episodes i am doing a similar project of sorts homemade fiberglass hydrofoil but watching your videos showed me how to soften the noise and bring stability to my framework as will be running a 300 hp jet.

@JohnnyAnderson1 5 ай бұрын

Sick build, looks so fun great work!

@uwulord7458 5 ай бұрын

Literal shade tree! You rock guy!

@BlancoLobo 5 ай бұрын

That battery is huge. Where did it come from ?

@lean-tocustoms7910 5 ай бұрын

@@BlancoLobo it's a Northstar battery, made for battery backup for cell phone towers

@JohnnyAnderson1 5 ай бұрын

Looks good!

@lean-tocustoms7910 5 ай бұрын

@@JohnnyAnderson1 Thanks, after I saw your video, I knew what I had to do. Lol

@JohnnyAnderson1 5 ай бұрын

@lean-tocustoms7910 I'm sure there are a few differences from boat to boat but hopefully it helped! Mine is still running great, I've been wanting to make another video and do a top speed pull but it's not easy to film lol.

@lean-tocustoms7910 5 ай бұрын

@@JohnnyAnderson1 I understand the difficulty in filming somethings, I have the same problem filming my smaller boats

@TSRGarage 5 ай бұрын

Excellent work. "There's a motor hanging in the tree over there." I'm in👍, shade tree mechanicing.... Doing all that work without removing the rear seat, I 🫡 salute you. Also commend you for your bravery... no rags or tape over the intake, I surely would have lost something into it.

@shawngoodell772 5 ай бұрын

Green treated wood has copper in it and it will eat the aluminium it touches over time. Def not the wood to use unless you treat the wood surface with fiberglass resin.

@lean-tocustoms7910 5 ай бұрын

@@shawngoodell772 thanks for the info, I'll keep an eye on it. I may switch it out in a couple seasons

@Hootman865 5 ай бұрын

Beautiful boat

@topshopbuildandfabricate24 5 ай бұрын

I just watched your boat build video and noticed you have it painted lsu colors lol

@lean-tocustoms7910 5 ай бұрын

@@topshopbuildandfabricate24 yeah, that wasn't on purpose. I was trying to match the Sea Doo I cut apart to make it.

@michaelfarr2735 5 ай бұрын

Nice build

@ChoppingBlockTree 6 ай бұрын

Nice, the inspiration I needed for relocating my coils on the L92 jet boat!

@alalvarado2014 6 ай бұрын

I have a question. I just had air bags installed on my 65 but my installer did not reinstall the front shocks. Is there some kind of bracket I can weld on the frame to reinstall the shocks? My ride is very bouncy and rough going over uneven roads.

@phoenixarizona8441 6 ай бұрын

Take it to the jet boat meet ups and poker runs

@lean-tocustoms7910 6 ай бұрын

@@phoenixarizona8441 are there any of those near SW Missouri?

@phoenixarizona8441 5 күн бұрын

@lean-tocustoms7910 st clear river in missouri there's a couple jet Jon's as well I like your jet jon it reminds me of a 1970's jet boat you should make a patten and Blueprint for your jet jon and build jet jons

@phoenixarizona8441 6 ай бұрын

Looks like a old 70's jet boat