I placed a reservation! So excited it’s going to be my first and hopefully a life time grinder❤
@option-ocoffeegrinder4 күн бұрын
Thank you for your support, we hope you will enjoy the Casa when it arrives!
@user-yu4oe8qj6c9 күн бұрын
❤
@bznelson9125 күн бұрын
I second the commenter that spoke about trying to keep marks 2 and 3 together during calibration. I ended up with my chirp point being about 0.1, but I didn't care at that point, it was close enough and now my safety stop is just at 0.1. I combined a burr swap (Mizen Omni -> SSP MP v2) and the burr swap was fairly straightforward with only some minor hitches.
@crespo010Ай бұрын
rpm?
@option-ocoffeegrinderАй бұрын
We had the speed set to 3 for this profile which equates to 580rpm, hope this helps
@libartstechАй бұрын
This will be my first electric grinder. I started with a Timemore Slim Plus, upgraded to an 1zpresso K-Max, and am now getting the Casa. Can't wait for mine to get here.
@satoshimuny312 ай бұрын
I ordered it I still prefer burr nut removal is also tool free
@michaelhsu20512 ай бұрын
umm did anyone see how the grinds fell out of the bucket... why don't you center that?
@option-ocoffeegrinder2 ай бұрын
Thanks for the comment! If you mean moving the cup further out (to the front), it would increase the length of the base unnecessarily, and the partially exposed cup would create an odd visual as well. Bringing the cup closer to the main barrel means more grind would fall outside the cup. Our team had to find a good balance between form and function. After thorough testing, we determined that this position offers the optimal balance between design and functionality. During the shoot, we had to do a lot of consecutive grinding, which led to some static buildup (hence some stray grind). However, in normal daily use, most, if not all, of the grind do fall into the cup
@David_Best2 ай бұрын
What size portafilter does the catch cup mesh with? 53mm? 58mm?
@option-ocoffeegrinderАй бұрын
it's 58mm!
@userinfo31192 ай бұрын
Looks like some static issues in the shoot
@option-ocoffeegrinder2 ай бұрын
Thanks for the comment! In retrospect, we should've kept it clean, but on the flip side we are also keeping it real haha. On the filming day we were grinding multiple back to back shots (for different takes), which led to some static accumulation. In normal daily use you will likely see much less. Also, that's done completely without RDT so it is very minimal compared to other grinders.
@nathanprocaccini16912 ай бұрын
the lamp's made it, woo hoo!
@option-ocoffeegrinder2 ай бұрын
let's gooo!!! 🤣
@user-hp8nl9lg3c2 ай бұрын
はよしてー
@simonswanson89402 ай бұрын
Why is the chute not centered? The catch cup lip is catching more grounds than it needs to catch
@option-ocoffeegrinder2 ай бұрын
Thanks for the comment! If you mean moving the cup further out (to the front), it would increase the length of the base unnecessarily, and the partially exposed cup would create an odd visual as well. Bringing the cup closer to the main barrel means more grind would fall outside the cup. Our team had to find a good balance between form and function. After thorough testing, we determined that this position offers the optimal balance between design and functionality. During the shoot, we had to do a lot of consecutive grinding, which led to some static buildup (hence some stray grind). However, in normal daily use, most, if not all, of the grind do fall into the cup
@ibandribew2 ай бұрын
I love the disassembly! I think a lot of home coffee drinkers are intimidated by disassembly.
@option-ocoffeegrinder2 ай бұрын
Glad you like it! There's nothing inherently wrong with not disassembling the grinder too unless you need to. :D but we hoped this made that a little easier when it comes to disassembling time.
@deadlikeme-5202 ай бұрын
Very excited to get mine!
@patompoomwichitchoti60512 ай бұрын
❤❤❤
@BensCoffeeRants2 ай бұрын
I want one, but all I can afford is the OPUS which I slapped an Option-O Sticker on it :D
@smokeslices2982 ай бұрын
Does the not consistent sound when the burrs touch mean the alignment is off? And by alignment I mean the alignment of the burrs to one another, not the alignment to 0.
@narf853 ай бұрын
Can someone explain what the 2 dots being marked at 1:53 lines up with?
@cliffcox76437 ай бұрын
So this thing should last forever and always be able to be calibrated, esp as burrs wear and you use a new burr.. End of Life grinder.
@mrgazillions8 ай бұрын
Too complicated. Should be done by the factory
@MaikuB848 ай бұрын
They're meant to be calibrated when you buy them brand new already if that's what you're referring to. I believe the video is more for those that want to recalibrate
@reekris888 ай бұрын
The part where you have to tighten the 4 screws towards the end while keeping all the dots aligned is pure torture. lol. Took forever and my 0 is still off by like 1 notch. :(
@Lucasliewkitchong5 ай бұрын
I guess because of the burr wear & tear? Mine zero point also went coarser to 0.01.
@BensCoffeeRants10 ай бұрын
I wish you'd send me one for testing, but I'd also need a p100 with it or maybe the lagom 01 😊
@jeffashworth214710 ай бұрын
I had been debating between a Key Mkii and the P64 and details like this are what tipped the scales in favor of the P64 for me. Beautifully engineered and great to see where Option-O took feedback from the earlier versions and updated the calibration so it can always show zero at burr touch!
@Persepolis856411 ай бұрын
What burr was used?
@Abrikosmanden11 ай бұрын
It's so FAST 😮
@_Brewn10 ай бұрын
102mm Burrs paired with a big motor ;D <3
@xbhollandx11 ай бұрын
Does this grinder have the final production motor? Sounded very loud and sharp.
@tullynation11 ай бұрын
Option-O, can you answer this question? How much quieter, if at all, are production units?
@_Brewn10 ай бұрын
i think not, because it sounds like the other beta units :( @@tullynation
@bean_gamer966011 ай бұрын
My dumbass thought this was some kind of microscope
@filmhaltig9 ай бұрын
I mean it def looks like some kind of lab equipment for sure!
@DR19X11 ай бұрын
this grinder does not sound good.
@vancitycanucks11 ай бұрын
Sounds fine to me? Do you mean the fast speed at the end which ensures all grinds come out?
@tullynation11 ай бұрын
Is this a pre-production unit or production unit with the new, supposedly quieter, motor?
@_Brewn10 ай бұрын
its no fan, the grinder spins up to throw every bit out automaticly@@vancitycanucks
@_Brewn10 ай бұрын
i guess its pre production, because all pre production models sound like this ... but in some ways i like the noise, it sounds so industrial :D@@tullynation
@patompoomwichitchoti605111 ай бұрын
Neat Click look easy and smooth
@vanjosh7763 Жыл бұрын
It looked like she didn't marked the bottom with the top dot perfectly aligned. A simple Caliper ruler would have been useful for perfect alignment with the top to bottom dot.
@markfallu2389 Жыл бұрын
Wow - that is a wonderful level of high precision manufacturing - less than 5 microns (micrometers), that is less than .2 thousandths of an inch for US folk, less than the width of a strand of spider silk.
@williamchu8418 Жыл бұрын
For P100, is this the same process to set the zero calibration? if not, can you post one how-to video? Thanks.
@markusm252 Жыл бұрын
The engineering of this looks so good. I love how the adjustment of the zero point and safety lock was implemented on this new version. All that without changing the overall appearance and the haptics. 👍
@BensCoffeeRants Жыл бұрын
Seems a little complicated but not something you gotta do everyday. NIce to have the feature if you want. On my older p64 my burr touch point is like 8.6 or something randomly high. Same deal with the Df64s usually when you install ssp burrs the touch point goes from around 0 to 25 you just gotta remember not to go past that. But it's not hard if you're grinding for espresso a whole 10 steps up at 9.5 (on p64) or 35ish on DF64. The locking feature would help prevent newbs from going too far accidentally I guess.
@MrAndrew60 Жыл бұрын
As a newbie, I took it right out of the box and I was chirping around 2. I recalibrated it in 10min, pretty easy to follow. Now I'm chirping right at zero with the safety lock in place. Ready to grind!
@cliffcox76437 ай бұрын
THis is really easy and clear.
@slappadabass19772 жыл бұрын
If only you could actually buy one of these. The endless wait and pre orders doesn’t make me want to keep waiting.
@revolutiondance11412 жыл бұрын
I have absolutely the best experience with Option-o products. They are making the best single dose grinders in the market. Keep up the great work.
@AdastraRecordings2 жыл бұрын
no variable rpm?
@thinchina3 жыл бұрын
Nice marketing video, now looking forward to seeing a more detailed review
@WONtothaG3 жыл бұрын
Weber Key 🔑 Grinder 🆚 Langom P-100
@BensCoffeeRants2 жыл бұрын
Big flat vs big conical both will be good depending on your tastes. Having both would be ideal. Option O also their own big conical grinder! Similar or same 83mm burrs I believe?
@ultraman88993 жыл бұрын
Please upload video without background music next time.
@radiantav3 жыл бұрын
This looks and sounds fantastic. You need to get this into more reviewers and distributors hands
@BensCoffeeRants2 жыл бұрын
I'm happy to be paid to do a review, I already like it though :D