Thank you for this video! I was very close to buying a whole new pump which isn’t cheap. Thank you again!!
@LaurelBurke-mx4vg3 ай бұрын
Somehow my milk is getting stuck in the green circle at the top in between the shield, when I take pump off all the milk comes pouring out. I don’t know why it’s doing this
@AkkoandTamo3 ай бұрын
Does this happen when you are just sitting still? If not, try that it’s possible that there’s too much movement. If you are just sitting, try completely drying all parts especially the green seal. And making sure it’s properly places against the breast shield. Let me know how that goes.
@megcassidy90554 ай бұрын
So helpful thank you!!!
@vernenfelcher64425 ай бұрын
"Promo sm"
@veronicamoretti-jd8tc6 ай бұрын
Hi! If the second test doesn’t work what should I do?
@AkkoandTamo6 ай бұрын
Hello @veronicamoretti would you clarify the second test ? Is this when you place three seal in the hub test? If you are not getting good suction from the hub, you would have to contact Elvie in hopes for a new hub.
@veronicamoretti-jd8tc5 ай бұрын
@@AkkoandTamo Hi! the test you are making at 2.20min, this in my Elvis doesn't work, I don't see any function
@flameisbrighter206 ай бұрын
One of mine makes a high pitched beeping sound. What could it be?
@AkkoandTamo6 ай бұрын
Is the high pitch sound when everything is connected? Does the hub sound different before set up and after?
@flameisbrighter206 ай бұрын
@@AkkoandTamo yes it still makes the high pitch sound when I detach it from me with the hub still pumping
@flameisbrighter206 ай бұрын
@@AkkoandTamo it doesn’t immediately start making that sound, and it’s not all the time but when it does, it starts anytime during my pumping sessions.
@AkkoandTamo6 ай бұрын
Hmm it’s strange that it’s not consistent. I would try Elvie’s customer service and see if they can help further.
@Pathosia8 ай бұрын
Thank you so much for a really good troubleshooting video - it helped me alot! ❤
@AkkoandTamo7 ай бұрын
So glad it helped @pathosia
@gracelindsey3406 Жыл бұрын
2:34 good morning, this is what my pump is having issues with. It’s not suctioning right when I lay the other green piece on it. How do I fix this though? Thank you so much!
@AkkoandTamo Жыл бұрын
Hi @gracelindsey3406 if you’re not getting any suction when you lay the green piece, it may be a set up issue or a hub issue. Is this a problem from the beginning? Do you feel the air sucking in from the actual hub when you disassemble everything? If so, it’s a set up issue. If not, then I would contact Elvis support. In the event you feel the air being sucked in from the hub, there are multiple issues we have to look at. #1. Let’s check to see if the green seal is properly fitted. kzbin.info/www/bejne/nYWnh3edqZqFo7s @4:45 . #2, let’s check the valve kzbin.info/www/bejne/nYWnh3edqZqFo7s @5:19. Try these three things and let me know if you were able to solve it or not. Cheers
@jesst9479 Жыл бұрын
You’re the best! Thank you
@debbielosee5330 Жыл бұрын
Are they easy to put together? One easier?
@AkkoandTamo Жыл бұрын
Super easy. ! Once everything is washed and dried it’s pretty easy to assemble after the first time. Please let me know if you have anything questions.
@rebeckavogel6480 Жыл бұрын
Hardly a proper sound test if it's not in use. Im mean a lot of the sound would be blocked by the breasts I guess, won't it?
@AkkoandTamo Жыл бұрын
@Rebecca thank you for your comment. You’re absolutely right, some of the sound will be blocked by breasts/clothing. This video was only to compare the sounds between the Elvis and spectra to get a sense of how quiet the Elvie is since many people may have the spectra at home already. 🤙
@akikoakko Жыл бұрын
😂
@gaziislam6422 Жыл бұрын
Wish we would see this before. We snapped both, do you know where to find the replacement hub clip?
@AkkoandTamo Жыл бұрын
Hi @Gazi, no worries. Per Elvie, “”The Bottle Release is the part you use to release the Bottle from the Hub. If it is cracked or broken, it's very easily to replace. Please contact us and as long as your pump is within the two year warranty we can send you a replacement part along with instructions on how to replace it.” Hope this helps.
@darianalexi Жыл бұрын
Thank you!
@AkkoandTamo Жыл бұрын
You’re welcome ☺️
@shastikafashions1997 Жыл бұрын
Hi mam.....am from tamilnadu,plz I will buy so,plz link send me mam
@AkkoandTamo Жыл бұрын
@shastika Of course, here you go: ► Carer Health 24mm - amzn.to/3QigJw5 ►Carer Health 27mm - amzn.to/3zvCwcP
@shastikafashions1997 Жыл бұрын
Tq mam
@AkkoandTamo Жыл бұрын
Namaste 🙏
@ximenalondon8568 Жыл бұрын
Wow!!! Want more likes? -> 'Promo SM'!!!
@edubgeorgia Жыл бұрын
36 oz?! That's incredible. Do you pump the full 40 mins? I have been doing stimulation about halfway through but other than that I set it and forget it. I typically always get about 5-6 total. LOL.
@AkkoandTamo Жыл бұрын
Hi @elizabeth. Yup I pumped the full 40 min but in between I would empty the milk into a storage bag or bottle. The majority of my pump sessions were on expression mode; For my body, more milk came out being in expression mode. In addition, I drank lots of water; I think that helped the most.
@AkkoandTamo Жыл бұрын
Here’s the link to the skywalker trampoline amzn.to/3THMK1Q . We appreciate your support
@akikoakko Жыл бұрын
I love this OXO !!! ❤
@unstoppablesuri69 Жыл бұрын
🥰🥰🥰🥰😍😍😘😘😘
@vyvytmakeup Жыл бұрын
I love the lighting and simple instructions in this video. Everything was easy to see. Thank you!
@AkkoandTamo Жыл бұрын
Thanks for your input! ❤️
@meghanc5793 Жыл бұрын
Wow thank you! It was my valve! It was torn! Suction now working!
@AkkoandTamo Жыл бұрын
@meghan so glad you found the problem. Happy pumping. Xoxo
@merliashaukath1297Ай бұрын
Did you figure out how it had torn? This is my second valve that’s tearing and it’s supposed to last 6 months at least, right?
@jenniecockburn8811 Жыл бұрын
never pump before measuring your nipple.
@loveme2oo Жыл бұрын
This pump is now $109.99
@AkkoandTamo Жыл бұрын
Hi @loveme2oo, thanks for letting us know the price of a double breast pump. The $59.99 was the price of a single but it seems Carer Health only sells in doubles and not single anymore.
@jephthahmcnatt7221 Жыл бұрын
🅿🆁🅾🅼🅾🆂🅼
@phebebart-williams57322 жыл бұрын
This video has been very helpful. I had problems with my pump and after watching your video I was able to use my pump again.
@AkkoandTamo2 жыл бұрын
Hi @Phebe so glad it helped.
@MegaLORDDK Жыл бұрын
What is problem?
@Serenov.a2 жыл бұрын
Amazon had a 40% coupon and my registry discount means I got the 2 set for $48! So excited and hope this helps me feel less gross about pumping!
@AkkoandTamo2 жыл бұрын
@Erica that’s amazing ! Got to love those deals! Good luck
@cliftonandpatticox63542 жыл бұрын
great video thanks
@courtenaygolden89672 жыл бұрын
So helpful thank you
@TiffyTiff11942 жыл бұрын
Hi Akko, may I please know how long have you been using the Elvie and has it been able to maintain your milk supply? I'm using the Spectra S9 now and worrying of decreasing milk supply when switching to the Elvie.
@AkkoandTamo2 жыл бұрын
Hi! When I would travel I used the Elvie but when I was back home, I would use both the Spectra and Elvie. I used the spectra because I didn’t have to pump for as long as the Elvie (~35-40min) to get the same amount. Everyone is different so I would advise you switch slowly. And if it doesn’t work out, use the Elvie during your outings or when you need to be hands free. Hope this helps.
@TiffyTiff11942 жыл бұрын
@@AkkoandTamo Thank you, Akko. As you have been using the Elvie for 2 years now, how do you feel? Are there any parts replacement you have to do throughout the times using?
@AkkoandTamo2 жыл бұрын
Great question, I would say the usually wear and tear products such as the replacement of the valve, possibly the breast shield depending on how you wash; it doesn’t tolerated the dish washer very well. Those are the two items I probably had to replace during my pumping journey. I can also see that some may need to replace the seal.
@rav.refulgent2 жыл бұрын
very helpful information.
@khaile9732 жыл бұрын
I noticed you mentioned the valve shouldn’t be worn but if it is completely sealed it will create issues. How much of a slit should it have in it?
@AkkoandTamo2 жыл бұрын
Hi Kirsty, great question. You just need to make sure the value isn’t stuck together. As long as you can squeeze it and it splits, it’s good to go. Now, if there’s too much spacing present (without squeezing the valve) then you may need to replace with another to have optimal suction.
@jenniecockburn88112 жыл бұрын
The way you're saying how to measure ismin correct.
@AkkoandTamo2 жыл бұрын
Thank you for letting me know.
@VirtuesQuest2 жыл бұрын
This video helped big time. I was about to give up after paying the $500. Bless you
@AkkoandTamo2 жыл бұрын
I’m so glad this helped.
@carleyragan59652 жыл бұрын
Do you have a link to buy the carahealth breast pump? I can’t find it.
@AkkoandTamo2 жыл бұрын
Hi @Carley we do have links. Thank you. CARER HEALTH BREAST PUMP ► Carer Health 24mm - amzn.to/397Di2V (Update: Now comes with both 24mm & 21mm) ►Carer Health 27mm - amzn.to/3ln9YeF (Update: Now Comes with 27mm & 24mm) (This Is not the Breast Pump I reviewed - Carer Health had an update with size 27mm motor)
@meiyam65982 жыл бұрын
Thanks for the video! Love the aesthetics of it!
@AkkoandTamo2 жыл бұрын
Hi @Mei thanks for the positive feedback.
@grapeypear45582 жыл бұрын
Thank you for doing this video!
@freetobe152 жыл бұрын
Wow! I didn’t even know there were dupes for the Elvie! Thank you for sharing!!!
@nicolebutler15152 жыл бұрын
I am so happy I found your channel!!! Thank you so much!! I would’ve never figured out it was the valve!!!!
@AkkoandTamo2 жыл бұрын
So glad it helped.
@nicolebutler15152 жыл бұрын
Awesome instructional. Thank you so much!!!
@AkkoandTamo2 жыл бұрын
Glad it helped
@swethachintalapudi2 жыл бұрын
Very clear , thank you so much!! This helps !
@azadahsu64562 жыл бұрын
Hi! Thank you so much for this video! I have trouble with suction on one of my pumps and I followed your steps to see where I'm having issues. I have no issue with suction when I place the seal into the hub but if I fully assemble it and place the other seal where my nipple would be (as you did at 2:27 in your video) I'm getting no suction at all. Any thoughts on where my issue may be or what I can try? Thank you!
@AkkoandTamo2 жыл бұрын
Hi@ Azada I’m sorry you’re having Trouble with suction. It can be frustrating. I’m thinking the problem is in the valve or seal. Have you checked to see if the seal is nice and flat (see 1:00) if that’s not the problem have you check to see if the entire upper part of the valve is showering (see 4:40) ? Please let me know if this helps?
@azadahsu64562 жыл бұрын
@@AkkoandTamo Ok! Checked both and not seeing a problem there.
@AkkoandTamo2 жыл бұрын
@Azada. Hmmm. Weird that you’re getting no suction. Was it ever working properly ?
@USMCButtons2 жыл бұрын
My wife and I had this same problem, I was able to get it to work by ensuring the seal for the soft plastic portion didn't move when inserting the hard plastic portion. That's the only thing that I can think of that would have caused this issue. Hopefully this helps!
@AkkoandTamo2 жыл бұрын
I hope it helps too.
@chelseygonzalez65392 жыл бұрын
I’m 17mm can I buy inserts that are different brand and put them in the carahealth