Been catching tuna since I moved to sd. Crazy that tuna is now in ny. The East river used to be nasty and now it’s fishable.
@petera11173 ай бұрын
List of tools needed?
@BradHemedes3 ай бұрын
Screwdriver, long nose pliers, and C clip tool
@petera11173 ай бұрын
The music is epic. lol
@petera11173 ай бұрын
The music is epic. Lol
@azonemohd3884 ай бұрын
Hii...i get interested with your c clip tool...where can i get it..can you send me a link to buy it..tq
@BradHemedes3 ай бұрын
a.co/d/04mVqPct
@nickthompson13624 ай бұрын
So you did not have to use the remote wire/turn on wire? How does the amp know when to power on and off? I was following your install and now I'm stuck on how to get a signal to the remote wire for a kicker hideaway 8" compact sub.
@BradHemedes4 ай бұрын
From the speaker signal. It will turn on and off your amp. I believe it is a standard feature for amps. There maybe a switch though between remote wire or speaker signal. Check your manual. I am sure Kicker has that feature.
@RiniyaEldon4 ай бұрын
Great video. Which fuse did you use near the battery + and the AWG of the power & speaker wires?
@BradHemedes4 ай бұрын
I bought a kit from Crutchfield. Comes with the power wire and fuse. So I’m not sure about the specs.
@RiniyaEldon4 ай бұрын
@@BradHemedes Thanks for the reply. The sub comes with a 15 A fuse near its terminal right? So do we need to add an extra fuse near the battery also?
@BradHemedes4 ай бұрын
@RiniyaEldon oh yes! Power cable fuse protects the car battery
@PICKLEtime_14 ай бұрын
Saltwater fishing is a must on a fishermens bucket list, its rad out there
@216edwin6 ай бұрын
Which one you like better penn phantom 400 or shimano tranx 400hg
@BradHemedes5 ай бұрын
Shimano tranx
@johnsmith-xd9ej7 ай бұрын
can you not just spin the spool on free spool until it align with the level wind?
@BradHemedes7 ай бұрын
This type of levelwind is geared with the spool. They move as the spool spins both engaged and free spool. That’s why I have to remove the left side plate to disengage the levelwind from the spool. Baitcasters are designed that level wind disengages at freespool.
@brayanramirez247 ай бұрын
How you use it my truck came with one but il turn on just that u don’t hear the bass
@BradHemedes7 ай бұрын
Check if the remote level control turned all the way up. If the wired remote is not installed, you have turn it up on the bass module itself
@eddyt54658 ай бұрын
Why did you have to connect to both left and right speakers to receive the signal? I saw another video that connected to only one side to receive the signal.
@BradHemedes8 ай бұрын
I believe bass signal is stereo also. Meaning some bass signal are sent to left speaker and others to the right.
@usstartarsauce9 ай бұрын
is the handle same as FTH15XNLD2 ?
@BradHemedes9 ай бұрын
Sorry not sure.
@losputnik69910 ай бұрын
Ciao amico ho lo stesso mulinello e ho un problema possibile avere informazioni per comprare ricambi
@BradHemedes10 ай бұрын
Sorry. Please translate to English.
@losputnik69910 ай бұрын
Cia
@NormanNoguera-v4d10 ай бұрын
I appreciate this video, kabayan. Thanks!
@BradHemedes10 ай бұрын
Salamat kabayan!
@robertbrandywine11 ай бұрын
Please, when you remove a part or assembly, turn it all around on camera so we can see it, before you set it down off camera.
@BradHemedes11 ай бұрын
Noted
@Power_idol Жыл бұрын
Nice catch bro idol. Hindi pa malamig dyan sa NY?
@BradHemedes Жыл бұрын
Malamig na. 2months wala fishing laging masama panahon pag weekend.
@Power_idol Жыл бұрын
@@BradHemedes next vacation mo bro dito tayo sa Romblon magfishing.
@TheJjman1988 Жыл бұрын
Will be trying this out tommorow, any updates since you did the pcm reset? Has it stayed functioning as normal? Thank you
@BradHemedes Жыл бұрын
It was fine then about a month ago error lights on dash and car was not shifting properly. Brought it to the dealer and got it fixed. Apparently there is a gasket failure on the transmission.
@TheJjman1988 Жыл бұрын
Thanks for the video and prompt response!
@BradHemedes Жыл бұрын
You’re welcome
@laurafoerster8519 Жыл бұрын
Will the high speed low profile work on the penn lp 300?? Just need a power handle . Maybe ne is the black and gold one.
@BradHemedes Жыл бұрын
Yes just replace it with a power handle if you can get it from an Abu Garcia Toro Revo Beast which is not easy to find. Got mine from Ebay for 50 bucks. I would suggest just get a Tranx 300HG come with a power handle. If you need extra cranking power, replace it a longer power handle from a ocea jigger or torium. You can buy them from shimano parts website.
@3oFaKindReels Жыл бұрын
Nice boat pre ! Viewer from California here !
@BradHemedes Жыл бұрын
Maraming salamat brother!
@DanielLimbirdman Жыл бұрын
Abu need to come out better selection of power handles if they want to maintain the 6x6 shaft reel.
@nancyn3863 Жыл бұрын
Hi do you know how to unscrew the drag knob on the new generation pen fathom ii ld 2 speed? You have to pull the knob to adjust it. Also my free spool was very bad so I was thinking to take apart just the drag knob and not the reel handle and put oil in parts where the spool rotates, does that sound like the right thing to do?
@BradHemedes Жыл бұрын
I'm sorry, I do not. But I would bet it is also the same if the mechanism to disengage the low gear is to turn the ring over the button. if you want lubricate the spool bearing you can remove the side plates without removing the handle. nice thing about my Penn and Avet lever drag.
@nancyn3863 Жыл бұрын
Thank you brad this video has been a tremendous help to me. The new models drag adjustment knob requires that you pull it out to turn it. I know you have to remove this knob to get to the spool bearings. So I’m going to try and loosen it while pulling it out at the same time.
@BradHemedes Жыл бұрын
Oh yes, you have to remove the drag preset knob.
@petera11173 ай бұрын
Gen1 rules
@rhythmnblues14 Жыл бұрын
Did the tc300 work fine after you repaired it? Or did the level wind give out again? Salamat tol sa informative video
@BradHemedes Жыл бұрын
Di ko masyado nagagamit bro. Loaner ko to e. Basta make sure lagi sync ang line at levelwind para di mapwersa.
@wardman7655 Жыл бұрын
Thanks - how do you like the AGWX braid?
@BradHemedes Жыл бұрын
It’s okay for the price. But I would still prefer Powerpro because it’s more reliable. It is smoother though because it has 9strands compare 4 to the Powerpro.
@jeffTv0220 Жыл бұрын
The lens guard are same on fusion and max?
@BradHemedes Жыл бұрын
Sorry, not sure I didn’t tried to put them on to the Fusion. I bet Amazon will have them.
@sab35263 Жыл бұрын
nice video, after I greases and oiled my reel I hear a grinding noise when I use the reel to test the drag. Did I put too much grease or not enough you think? the grinding comes from the clocker side on the left
@BradHemedes Жыл бұрын
Did you remove the left aide plate and oil the bearing?
@christopher88719 Жыл бұрын
How does it sound? Do you like it?
@BradHemedes Жыл бұрын
Added depth to the sound. Definitely made my base speaker system sound better. Don’t expect that this unit will make your car vibrate that much. It only does a little when playing bass music.
@christopher88719 Жыл бұрын
@@BradHemedes Thanks for the reply!
@BradHemedes Жыл бұрын
You’re welcome
@fuzion2003 Жыл бұрын
But hits hard? Feel it in the chest? I'm looking into this one or Rockford one. Thank you.
@BradHemedes Жыл бұрын
No not this one. You should consider the the Kicker with 10in sub. My friend told that has more bass and I think it’s cheaper too.
@mattpadat6149 Жыл бұрын
Apakah reel ini bisa diandalkan dan tidak cepat rusak?
@BradHemedes Жыл бұрын
English please
@mattpadat6149 Жыл бұрын
The reel is strong to used for jigging in 150-200 meter
@BradHemedes Жыл бұрын
Used the reel a couple of times then the levelwind and spring washers broke.
@ericbryan828 Жыл бұрын
I believe a spring popped out of my drag. Any tips on getting this back into place? Also, you are masterful at this sort of work!
@BradHemedes Жыл бұрын
Can you give me the part number so I have an idea which part are referring to.
@ericbryan828 Жыл бұрын
@@BradHemedes sorry, I believe it is #14 on the reel schematic.
@BradHemedes Жыл бұрын
You need a pick or pointed tweezers. Line up the lever on the rachet (2A). Pressed down the pin and spring push forward the lever. Hope that helps
@paulhenry8586 Жыл бұрын
Ive had several tica reels and recently was given two of these by my wife as a gift and they both were junk directly outve the box. One had a malfunctioning clicker mechanism and the other had a stripped out drag system. And like i said they were this way directly out of the box never even got to fish with them. Terrible reels buy okuma komodos or abu revo series i your looking for heavy duty low pro reels because these aren it
@carlossalas1183 Жыл бұрын
Hola maestro muchas gracias por el tiempo y la explicación acabó de comprar este reel soy de argentina. Y si veía antes tu vídeo no lo compraba 😢 igual ahora ya lo tengo alguna recomendación para que me pueda durar más y no romper. No sabes si siempre es así en todos los casos o solo te paso a vos.? Me costó unos $$150 dólares
@BradHemedes Жыл бұрын
Sorry my Spanish is poor.
@carlossalas1183 Жыл бұрын
Hello teacher, thank you very much for the time and the explanation. I have just bought this reel. I am from Argentina. And if I saw your video before, I didn't buy it 😢 Maybe now I already have some recommendation so that it can last longer and not break. You don't know if it is always like this in all cases or it only happened to you.? It cost me about $$150 dollars
@BradHemedes Жыл бұрын
So far it’s fine.
@carlossalas1183 Жыл бұрын
thank you so much
@redseaaquariums7564 Жыл бұрын
Did you find these upgrades make difference in real life fishing? Did it solve the hard to crank issue?
@BradHemedes Жыл бұрын
It depends. This modification is for vertical jigging. If you’re using the reel for casting keep the stock handles.
@redseaaquariums7564 Жыл бұрын
@@BradHemedes thank you I have the 300 fathom High speed for vertical jig (slow pitch) and i am worried about losing power to the high gear. You think upgrading the handle will solve the issue?
@BradHemedes Жыл бұрын
Oh yes.
@BradHemedes Жыл бұрын
Oh yes.
@juanignaciowalker3940 Жыл бұрын
Hi bro, Can you tellme more About the delay and how do yo solved? I have a 2022 explorer, when it is hot, the transmission has a delay when I put Reverse after the Drive. Thanks !
@BradHemedes Жыл бұрын
Same problem. Only from drive to reverse. About 3 seconds then it jerks. Dealership wanted to replace the transmission with only 3k miles. I did some research and someone did a TCM reset and it fixed the problem. So I decided to buy a Ford Scanner from amazon that has the TCM/PCM reset function and it fixed the problem.
@juanignaciowalker3940 Жыл бұрын
@@BradHemedes do you have a link of this scaner?
@BradHemedes Жыл бұрын
AUTOPHIX 7150 Elite Full Systems... www.amazon.com/dp/B07Q6HWY6C?ref=ppx_pop_mob_ap_share
@BradHemedes Жыл бұрын
In the scanner enter 2019 to access PCM reset function. When you choose 2020 it will not show the special function.
@juanignaciowalker3940 Жыл бұрын
@@BradHemedes perfect! says literaly PCM RESET?
@Davido50 Жыл бұрын
Beautiful SUV! Love my '22 Edge AWD.
@BradHemedes Жыл бұрын
Love it in spite of the transmission issue. Happy it’s fixed now.
@motion0404 Жыл бұрын
What website did you buy the power handle from can you share the link?
@BradHemedes Жыл бұрын
fishshop.shimano.com/
@BradHemedes Жыл бұрын
Either search for the Oceajigger 2000 handle or Torium PG models handle
@Achievementsxyz Жыл бұрын
Is the drag washer glued to the spool?
@BradHemedes Жыл бұрын
No it’s not. It held by a ring retainer in the center of the spool.
@simonniu9575 Жыл бұрын
Great video. Bro! Shimano released the Tekoda 800. Which handle do you suggest to upgrade, the ocea jig 2000 or 4000? Thank you. They have different part number. But I don't the difference. Thanks.
@BradHemedes Жыл бұрын
It seems they have the same. My suggestion is when you buy the Tekota 800. Measure the shaft. If it’s 8x5mm which I believe it is. You can use the OJ2000 handle or better yet the Torium PG model handles which is cheaper and you can use the knot, retainer and retainer screw of the tekota.
@concerncitizen6020 Жыл бұрын
Great video thanks. Is there a reason why you have gloves on your hands to do this?
@BradHemedes Жыл бұрын
Thanks! I just serviced reels when I made the video. Sweat from your hands are corrosive to reel parts.
@concerncitizen6020 Жыл бұрын
@@BradHemedes thank you
@dreadheadanglerfishingandlife Жыл бұрын
Love the shimano Tranx 😍
@dreadheadanglerfishingandlife Жыл бұрын
Power si Bradley
@stevejohnson5728 Жыл бұрын
where can i buy the abu garcia or other c-clip removal tool ? been searching online and cant find one>
@BradHemedes Жыл бұрын
Mine is no longer available in Amazon. This is what found. NEIKO 01970A E-Clip Remover & Installer Tool Set | 4 Piece | SAE | 1/4" to 3/8" a.co/d/g5yqnBS
@TomyTekOutdoors Жыл бұрын
Did you ever have any connectivity problems with you Max and The Remote? I put my Max in a spot that is a pain to get to.
@BradHemedes Жыл бұрын
None what so ever. It control my Max and 10 at same time.
@72bronxboy Жыл бұрын
Hi I can’t connect my control to my max 😮
@BradHemedes Жыл бұрын
You’re using “the remote right? The new model?
@TomyTekOutdoors Жыл бұрын
Nice work. It's cool to see how jigging is done in different areas. We use a similar technique in the Chesapeake Bay, but our retrieve is different. This was a very informative video.
@BradHemedes Жыл бұрын
Thanks. I tried different techniques. But this time ne seems to be the most effective in these waters.
@Mr24Matt2 жыл бұрын
Hello, could you tell me where you got the spare parts?
@BradHemedes2 жыл бұрын
If you’re US based. You have to call this number and give them the part number. +1-253-872-2024
@ATC2352 жыл бұрын
How do u use that jig
@BradHemedes2 жыл бұрын
For me I drop the jig let it hit buttom then I pause after every full turn. About 5 to 10 full turns depending on the depth and where fish is marking on the fish finder. I vary the speed depending on what triggers a bite.
@ATC2352 жыл бұрын
@@BradHemedes thank you. Appreciate it
@dreadheadanglerfishingandlife2 жыл бұрын
Nice catch sir Bradley Fishing with the family is always precious. Love the bonding ❤ Keep safe and enjoy
@TheMrmilko2 жыл бұрын
How is the reel so far, is a big difference between 300 and 400 size?
@BradHemedes2 жыл бұрын
It’s a good reel. The difference is line capacity and wt. if you’re going to be using 20lbs braid go for 300 size.