I just received my Tiger Shark 2 and I have a few questions about the install and the initial setup. Will you be able to assist me?
@dannywilliams43872 жыл бұрын
this machine and company is junk
@bunkelops2 жыл бұрын
Agreed, our company purchased one and the key lookup database has never worked. We tirelessly worked with HPC and they never could get it to work and don't really care. $8K boat anchor 👎
@danwong36012 жыл бұрын
Great machine, but price not very pleasing. Customer service & tech support at best marginal. When a newer model comes, good luck with support. Huge investment down the drain. Anyone remember "Blue Shark"?
@getfastcashforkeys78902 жыл бұрын
Yup! Great potential but lacking on updates as well for newer models... or am I wrong 🤔? $9.5K For this kind price it should deliver quality and ability of 994, maybe Triton and ITL together!!! I rate it 82% rotten tomatoes/potatoes class.
@emfdesignsoftware36542 жыл бұрын
Where can I buy this machine
@willyvelez62693 жыл бұрын
Good video except for the music trust me people why you guys adding that annoying music to the videos u post
@marcuspete34633 жыл бұрын
And it can be yours for a small 10,000 bucks- here is how you can order yours..............
@yusmaniarjambi2873 жыл бұрын
I like...
@secretface703 жыл бұрын
I have still waiting for an email or call back!
@secretface703 жыл бұрын
So the first method my tigershark did not come with that key holder. I am second guessing this purchase. Have not been able to make a single key with our yet!
@MotorheadRedo3 жыл бұрын
Minus the engraving feature, why is the machine better than a cheaper Chinese key cutter like the sec-e9? What kind of warranty does it come with? Does it fit easily inside a mobile van?
@jeffsparrow664 жыл бұрын
Cool machine, just wish it was less expensive.
@Aplussafeandlock4 жыл бұрын
1 downvote. BIGFOOT DOESN'T BELIEVE IN YOU EITHER!
@ceqerses4 жыл бұрын
🤣🤣🤣🤣 y'all are ridiculous! I love it. I think I might be sold on this machine because of this video
@bjorncmadsen4 жыл бұрын
Locksmith humor needs a case of beer to fully comprehend
@Brettmlyons4 жыл бұрын
🤣
@KandSLocksmith4 жыл бұрын
I believe! I believe!
@paulyoung52064 жыл бұрын
Am looking to buy one of these machines however I have been seening lots of comments saying after service is bad what's your opinion on this matter as I seem to see u commenting on a lot there videos
@KandSLocksmith4 жыл бұрын
Paul Young I have had nothing but excellent service from the Tiger Shark 2 Team. I’ve had my machine for almost 2 years. I use it every day. It has features that I honestly have never used. I have every jaw except the dimple jaw. If you do get it, you won’t be sorry.
@michelleangers97044 жыл бұрын
HAHAHA
@qicpic0074 жыл бұрын
Customer service and repair sucks
@qicpic0074 жыл бұрын
Too bad they're customer/repair sucks
@blindbrailleable4 жыл бұрын
Cut a KEY! u fucking clickbait trash. Youre not cutting medeco lock. Just a key for one. Reporting this video.
@blindbrailleable4 жыл бұрын
Carcaradin carcarus
@SubLimation74 жыл бұрын
Im having some serious reminders of Miracle a9, I wonder who designed this, at least automotive parts.
@remotesandkeysspeciaists45974 жыл бұрын
this machine does not work as they show nor what they say, old software on new hardware, my machine broke in 2 moths, they still working on it, after almost 3 month they still have not fixed it.it was a costly mistake buying this junk
@remotesandkeysspeciaists45974 жыл бұрын
it is very slow, the software is very old, still does not cut new hyundai keys,miss leading information,garbage machine
@remotesandkeysspeciaists45974 жыл бұрын
this is stupid machine, does not work good,my machine broke down within 2 months of light use,the carrage jut stop moving, I sent it back ,3 months they still have not fixed yet, Im still waiting,unproffecional customer service.
@KandSLocksmith5 жыл бұрын
I'm not a MEDECO distributor, but I've actually decoded and cut MEDECO Biaxial Fireking safe lock keys with my machine.
@40motomike5 жыл бұрын
@Kirk Womack Where are you getting your blanks for Medeco? I was looking at the machine that cuts keyways too in order to produce my own blanks.
@KandSLocksmith5 жыл бұрын
40motomike I honestly can't remember where I got them from, but I believe you can purchase the non restricted keys from any distributor.
@40motomike5 жыл бұрын
@@KandSLocksmith Found a couple of the non restricted blanks. Most of them can be modified to fit the restricted keyways...
@KandSLocksmith5 жыл бұрын
The Tubular jaw is going to be one of my next purchases from HPC.
@KandSLocksmith5 жыл бұрын
This machine has been a real money maker for me cutting automotive keys. Thanks for all your support!
@KandSLocksmith5 жыл бұрын
LOL! I really like this video. Made me laugh because it really sounded like my story... "There once was a man named Kirk, who retired and then had no work; after taking a class and buying some brass he then had to go back to work... He tried using different machines, the HPC was was the machine of his dreams. He saved up his pennies until he had many and purchased the Tiger Shark 2.
@KandSLocksmith5 жыл бұрын
I cranked out 15 keys the other day for the Sheriffs Department in a matter of minutes. They couldn't believe how quickly I was finished with the job. This machine can duplicate keys to manufacturers specs or original key specs quickly and easily.
@KandSLocksmith5 жыл бұрын
I used this new quick search feature today and I really like it! Another feature that I use almost every time I generate keys for a vehicle that has no keys is the auto fill program. When I use certain tools to decode the door locks, I then take those numbers and plug them into the missing bitting and it gives me all the possibilities for the ignition.
@KandSLocksmith5 жыл бұрын
I can attest to the fact that this machine can do almost everything! I use it every day and the engraving option is nothing short of amazing!! I used it recently for engraving numbers on about 200 safe deposit box keys for a new install at a bank. It made quick work of the job and they looked very professional. I've even have had some fun engraving some JPG files that I have on larger bow keys. I would recommend this machine in every shop. It is so easy to use and the newest updates that HPC have implemented are great!
@Ghost_Os5 жыл бұрын
I'm interested in this project, but have a question; what prevents accidental deployment? For example, you leave your home and lock your deadbolt with your keys... While your gone, someone stops by to see if you're home, knocking on the door a few times... What prevents the vibration from causing the active portion from falling down, and locking you out?
@Ghost_Os3 жыл бұрын
@ That's definitely a solution. Do you feel that there's a chance it would accidentally deploy without the screws and rubber band?
@Adam1nToronto2 жыл бұрын
@H Brauer Sure, but can you make one that is: 1. Easy to remember to use every day as flipping the deadbolt switch? 2. Looks nice? 3. Everyone in your household can use? 4. Is durable? 5. Is actually difficult to defeat? 6. Can keep a nosy landlord out (yes, even when you're at home)? 7. Is any less stupid than you believe this one to be?
@KandSLocksmith5 жыл бұрын
This machine just replaced three redundant machines on my service vehicle! The Tiger Shark2 is my go to machine for all my key cutting needs. It even engraves!
@adrn25m5 жыл бұрын
Can we please have videos of the plug followers , especially the adjustable plug follower and the rekey station and adjustable plug holder and other tools for rekeying locks? Thank you.
@MikeF11895 жыл бұрын
Weird
@KandSLocksmith5 жыл бұрын
This will have to be one of my next additions to my Tiger Shark2. I really can't say enough good things about this fine key machine. It can literally cut just about every key I've put in it and if it doesn't, the engineers will make sure it will. This is a real money maker for me! Thank You HPC for making such a fine machine!
@giacomopasquale27077 жыл бұрын
Nice idea, but I hoping to see a mass key cutting machine, where you're able to pre load with blanks and let it go to town.
@crlocksmtih8 жыл бұрын
I've got the HPC 7000, which Is the same machine. It is a great Machine! Easy to use, if you are looking for a fast Blitz machine....this is it
@mrhelohlocksmithsshop44338 жыл бұрын
Thats a really good machine i have it it works great heloh locksmiths
@kyleclemmons72958 жыл бұрын
You must like keys i'm guessing
@vincentdragonle16858 жыл бұрын
Where can I get that lock drill thing on a bother video that talk have
@PlanetRockJesus8 жыл бұрын
+VicnentDragonLe What does your sentence even mean?