Adding an aftermarket pipe will sound better and save weight ✊🏻🏍️💨
@michaelwaddell320958 минут бұрын
@@hydroboy35th I’m happy with it the way it is. Cheers
@wozza595 сағат бұрын
Is the new 15t a CF Moto sprocket, or aftermarket?
@michaelwaddell3209Сағат бұрын
i got that from Aliexpress.
@wozza59Сағат бұрын
@@michaelwaddell3209 Thank you for the info.
@federicovissani18029 сағат бұрын
A ver cuánto duran estas cosas chinas !!! Te muestran la del Dakar y después las que venden son de una calidad pésima
@michaelwaddell3209Сағат бұрын
The build quality appears to be very good. I can’t fault it so far.
@crj721811 сағат бұрын
Una repro y piñón de 15 mi like desde España 🇪🇦
@mynxl14 сағат бұрын
Test rode the MT today handles well and sounds great but I could not live with that snatchy throttle. Hope they sort it out
@michaelwaddell320914 сағат бұрын
@@mynxl mine has the latest update and isn’t too bad. Apparently sss (up the coast) has a reflash that solves the whole problem and more. I don’t have personal experience with this though. Don’t write the bike off because of it. The dealer may not have even done the update.
@daveo984416 сағат бұрын
Looking to get mine in the next month 🍻
@michaelwaddell320916 сағат бұрын
@@daveo9844 woohoo!!
@nevillegreg116 сағат бұрын
That was a bit too brief for a show and learn. Did you use an impact driver to remove and re-set the sprocket nut? Did you have to put the bike in gear before removing the sprocket nut? Cheers.
@michaelwaddell320916 сағат бұрын
@@nevillegreg1 funny I was worried about making it too long. Yes bike in gear, impact driver broken so did it by hand with foot on the brake. Simple job with an impact driver bit harder the way I did it but it wasn’t as hard as they sometimes are.
@brucemonighan292520 сағат бұрын
do you know what the upper bar kit weighs?
@michaelwaddell320920 сағат бұрын
@@brucemonighan2925 no, I didn’t think to weigh it. It wasn’t too bad in my opinion handling it. I mean it has to be sturdy enough to do the job.
@ambiojester646322 сағат бұрын
Was there much play on the counter shaft compared to 14 tooth?
@michaelwaddell320920 сағат бұрын
no play at all.
@bugman533722 сағат бұрын
Crikey Mark If i end up buying CF450, Can i bring it to your Place and you Can INSTALL all the Accessories you have done to your CF450 🤣🤣😉 Thank for all your VIDEOS 🙏 Excellent Job 👍🏍
@michaelwaddell320920 сағат бұрын
Thanks..... but my point of making these videos is so you can do it yourself, or at least motivate you into doing it. Although, happy to have a beer and watch YOU do it!
@EduardoFernández-l9e23 сағат бұрын
What´s the correct tightening torque for the sprocket nut?
@SloppySalad4 сағат бұрын
Yes.
@JohnnyOctaneКүн бұрын
Here is a comment for the algorithm.
@michaelwaddell3209Күн бұрын
@@JohnnyOctane ha…thanks
@koichi_ariyamaКүн бұрын
Which model of handguards?
@michaelwaddell3209Күн бұрын
Barkbusters Model BHG-089
@davidedalceri369Күн бұрын
ottimo Lavoro 👌
@michaelwaddell3209Күн бұрын
Thanks
@patrickder.7456Күн бұрын
I bought the b&b bashplate because in my opinion its thruely the best in the world. The guys and girls from b&b deliver the best quality products. I paid over 585 aus dollar (incl. Import rights and tax to get it in the Netherlands). But i think its worth every cent.
@michaelwaddell3209Күн бұрын
Good stuff. Yes they are a great product. Cheers
@crj7218Күн бұрын
Mi like desde España 🇪🇦 alguien ha hecho repro y piñón de 15?
@michaelwaddell3209Күн бұрын
cfmoto 450mt | 15 Tooth Sprocket Installation kzbin.info/www/bejne/m3bXiKyZiL2nlc0 Is this what you mean?
@crj7218Күн бұрын
Si , pero además mañana voy a preguntar hay un vídeo de una mt 450 con un mapa de inyección mejorado
@davidz8Күн бұрын
Thanks for the video, the kit isBarkbusters BHG-089 just for anyone else watching.
@michaelwaddell3209Күн бұрын
@@davidz8 thanks 😊
@peteraids7980Күн бұрын
Michael , are you planning to use this cfmoto 450 mt to continue around Aus trip . That is with all the mods you're doing ,.
@michaelwaddell3209Күн бұрын
@@peteraids7980 unsure at this stage. It certainly is going to be my adventure bike, as in off road. Still deciding on that one.
@MotozillaphКүн бұрын
Are these universal or specific to 450MT? Nice video as usual. Thank you!
@michaelwaddell3209Күн бұрын
@@Motozillaph Thanks. It’s compatible with a few bikes and the 450mt is one of them. So yes it is model specific.
@user-lo2rd5wb8fКүн бұрын
Thanks for creating these videos. Just waiting on delivery of my bike. Im sure I will be back to have another look when time comes to add accessories. Cheers
@michaelwaddell3209Күн бұрын
@@user-lo2rd5wb8f Thanks. I’m happy it helps. Cheers
@ramtrev8215Күн бұрын
No lower bars?
@michaelwaddell3209Күн бұрын
@@ramtrev8215 they cannot mount with this plate as it covers the mounting points. This plate covers so much I don’t believe the lower bars are needed. Cheers
@ramtrev8215Күн бұрын
Have you thought about driving (auxiliary) lights? If so which ones?
@michaelwaddell3209Күн бұрын
@@ramtrev8215 haven’t as yet. I have the stedi ones on another bike. They are awesome, so if I got some I would get those. The ones I have are the square ones with 4 leds. One spot one flood.
@paulgriffin5572Күн бұрын
is that a CFMOTO specific BarkBuster model?
@michaelwaddell3209Күн бұрын
@@paulgriffin5572 yes it is. It is compatible with a few models. The 450mt being one of them.
@davidz8Күн бұрын
Its Barkbusters BHG-089
@lennyk752 күн бұрын
but you have nav bracket already on that bike?? Or is there a problem with it?
@michaelwaddell32092 күн бұрын
@@lennyk75 that bar is attached to the screen which goes up and down. I would be concerned that the extra weight of gps will eventually cause a problem to the height raising mechanism. It may not of course, but it’s a precaution. Cheers
@RichardS-qh8mi2 күн бұрын
What an outstanding bit of kit, talk about heavy duty! Looks good, fits good and even protects your lower/side engine cases/covers and your shock linkage! Do you know if B & B ship to the UK?
@michaelwaddell32092 күн бұрын
@@RichardS-qh8mi I’m sorry I don’t know. Maybe send them an email, they are good people to deal with. Cheers
@mort81432 күн бұрын
Thanks Michael. First view for me. Subscription button activated! I watch 'A Guy and his Troopy', and you have a similar format, albeit on two wheels. It's easy to dream I'm on your bike, enjoying the sights and smells. There's a Winton near Benalla in NE Victoria where I grew up. It's smaller than it's QLD namesake, but has a Motor Racing circuit. Thanks for your work. 🇦🇺👍
@michaelwaddell32092 күн бұрын
Many thanks. I also watch "A guy and his troopy" but funny I didn't realise we were that similar. I'll take that as a compliment. I really like Benalla, it is a great town. Cheers
@IanBrowne-x3h2 күн бұрын
Fuel : most expensive was Sydney !? . Well you certainly didn't get into the proper outback then
@michaelwaddell32092 күн бұрын
Yes Ian that is true, but it still surprised me that places like the Burke and Wills roadhouse was still cheaper. Cheers
@MRTPR3 күн бұрын
These CF moto's are really a very capable bike.
@busaman64044 күн бұрын
🤥
@crj72185 күн бұрын
Una repro y 62cv con piñón de 15 otra moto, mi like desde España 🇪🇦🇪🇦
@northcoastbiker5 күн бұрын
Me and 2 friends have ones on order told February 2025 at earliest. Live in Ireland
@Onceuponatimejotaele5 күн бұрын
Is this really a big issue?
@michaelwaddell32095 күн бұрын
@@Onceuponatimejotaele no. Something to be aware of that is all.
@nickblack92405 күн бұрын
μεγαλυτερο παπα απο αυτο το μηχανακι δεν εχω ξαναζησει στην ζωη μου! το καλυτερο και καλα!!! η καλυτερη σκουρια τελικα!!! παρτε παρτε αχαχαχαχαχα!
@davmanlop3336 күн бұрын
What bag you got one your cfmoto 450mt
@michaelwaddell32096 күн бұрын
Nelson rigg tail pack
@crj72186 күн бұрын
Una repro y un piñón de 15 ❤
@mabdurrahman69836 күн бұрын
Its great sound man
@user-wj8ws8ef7r6 күн бұрын
Versys needs the 400 engine. The difference in fuel economy on the 300 vs the 400 engine alone is a good enough reason for the 400 to exist.
@michaelwaddell32096 күн бұрын
@@user-wj8ws8ef7r a 400 would be good. It still is a great bike but I think more people would give it more attention if it was a 400.
@michaelwaddell32096 күн бұрын
Please subscribe if you haven't already. Over 80% of viewers are not subscribed. Subscribe and help me deliver more content for you. Your support is appreciated. Thanks
@michaelwaddell32097 күн бұрын
95% of you reading this comment are not subscribed. Please do so to help me grow this channel. Thanks
@michaelwaddell32097 күн бұрын
80% of viewers are not subscribed. Please subscribe and help me grow this channel. Thanks
@michaelwaddell32097 күн бұрын
Over 80% of you reading this comment are not subscribed. Please subscribe to help me grow this channel. Thanks
@crj72187 күн бұрын
Cuanto pesa llena de combustible y todas las protecciones, una reprogramación y in piñón de 15?
@michaelwaddell32097 күн бұрын
I’m sorry I don’t have the ability to weigh it properly.
@Boksburg19827 күн бұрын
Is there a warranty with these bikes?
@michaelwaddell32097 күн бұрын
@@Boksburg1982 3 years
@billyandriam7 күн бұрын
Hi Michael, would love to see a video where you try different tyres on the 450MT. I have literally searched the entire internet but I couldn't find any of the original CST 140/70R18 that came standard. Even the Pirelli scorpion are sized 150/70 so I was very worried what tire choice is available out there in the market for spares. Thanks!
@slobo_k.21067 күн бұрын
does 450mt have jerky throttle?
@michaelwaddell32097 күн бұрын
@@slobo_k.2106 much better with the update. I don’t find it a problem
@slobo_k.21067 күн бұрын
does it have jerky snatchy throttle?
@GrahamMutton7 күн бұрын
Soooo, the $64 question is “what will be the final cost once the Farkling is complete?”
@michaelwaddell32097 күн бұрын
@@GrahamMutton is farkling ever really complete? Seriously though I think about $1,000 aud above purchase price. I’m not going to go overboard.
@kevinarmstrong4787 күн бұрын
It’s impressive that these are designed to have crash bars fitted aftermarket bars need heavy brackets and I’m never certain what they bolt to should take an impact. Cracked plastic or bent frame?
@rlands5134fd7 күн бұрын
Are they the accessory crash bars from CFmoto?
@michaelwaddell32097 күн бұрын
Yes they are.
@kensbikestuff7 күн бұрын
Centre stand next.. Its the best thing you will ever buy for the bike. Ken
@michaelwaddell32097 күн бұрын
I agree, but I'll have to make sure it will fit with that enormous bash plate. I have one on my versys so i know how handy they are. I also don't want to ruin ground clearance either so i won't rush in.