I Hope WEN doesn't break on you, if so you will not have any luck replacing the parts.
@vietnamyamamoto270314 күн бұрын
great video. can you share the list of devices and their sizes with me?
@CNC4XR714 күн бұрын
@vietnamyamamoto2703 no one seems to read the video description. However, if you do, you will find a complete list and links for the items used.
@orangehorse503716 күн бұрын
Thanx for the video. This morning I checked on a few dies that I had repaired and noticed everyone running their parts covered in blue syrup! I use trim in our tool room and I've been familiar with it for several years. It was ordered for our production machines because the old lube was unavailable, with one problem. Nobody was taught to add water!!! Fortunately, I caught this on day one as I made my rounds. 😆💧 I ordered the same unit You've shown here, and I'll explain to the department's setup guys how to use it. 👍
@CNC4XR716 күн бұрын
@@orangehorse5037 your welcome
@AaronDengler18 күн бұрын
Woot! Very slick work there!
@CNC4XR718 күн бұрын
@@AaronDengler thank you.
@thelonghairedsucka19 күн бұрын
Is that a glitch mob intro?! Good video man 🤘
@hanzrudel648620 күн бұрын
El controlador chuno me parece mejor que masso, son de bucle cerrado, admiten ethercat, tiene funciones acanzadas, precisos rapidos, soportan encoder de valor absoluto, ti nen retroalimetacion de posicion, conexicion ditecta a encoder para spindle, entre otras cosas. Son relamente controlaodres profesionales de grado indutrial y lo mejor es que son baratos, hablando de LNC, Ky2000, HNC, Weihong, etc. Lo mejor es que cuestan lo mismo que un masso y son totalmente independientea...
@CNC4XR720 күн бұрын
The only drawback is the setup. most DIY machinists lack the knowledge for the wiring and setup. This I found to be more difficult than the others.
@rogermiller863626 күн бұрын
Hello I really enjoyed watching your video. I own a countertop and cabinet business and we have purchased a CNC machine for small projects. We recently started looking into running the machine at full potential. I am really interested in talking to you about getting our machine ready for a more vigorous production schedule. How can we reach out about hiring you for our project to get us going?
@CNC4XR724 күн бұрын
email Sent!
@JasonRogers-s3fАй бұрын
This series is really cool. I just got a cheap vertical injection machine (aliexpress) and a nice (but old) industrial CNC mill and working out a nicer clamp on the bottom was what brought me here. Fun stuff!
@CNC4XR7Ай бұрын
@@JasonRogers-s3f thank you
@TylerGeckoАй бұрын
The precision and detail this machine delivers are outstanding, especially with its 30W power, which handles a wide range of materials effortlessly. The setup was straightforward, and the user-friendly interface made it easy to start engraving almost immediately. Whether you're a hobbyist or a professional, the MONPORT GP 30 offers reliable performance and versatility that’s hard to beat. I highly recommend it to anyone looking to elevate their laser engraving work. I love this much!
@CNC4XR720 күн бұрын
Thank you, I completely agree
@eddies6669Ай бұрын
Can you tell how do you calibrate your index sensor , couse mine does read but the process to synk is the trick
@qzwqsy2 ай бұрын
Thank you for the great video!
@CNC4XR7Ай бұрын
My pleasure!
@qzwqsy2 ай бұрын
Great video thank you!
@CNC4XR720 күн бұрын
Glad you liked it!
@HNYBAGR242 ай бұрын
Great video! I just purchased the rotary attachment. What settings are you using for it? I can't get it dialed in.
@CNC4XR72 ай бұрын
I did a rotary setup video on the Monport GP-30 setup is the same
@HNYBAGR242 ай бұрын
@@CNC4XR7 Nice! I'll go check it out. Also which lens are you using?
@CNC4XR72 ай бұрын
@HNYBAGR24 stock lense on both units
@nowar92202 ай бұрын
Love this series!! No idea why its such low views after 5 years!
@CNC4XR72 ай бұрын
thank you
@nowar92202 ай бұрын
Love this vid! Thanks for the rundown! So if all those parameters are dialled in under the max tolerances how accurate will the machine be? (Repeatability accuracy?) Cheap cncs are approx 0.02mm Decent quality is approx 0.01mm (10microns) And precision machines (kern, etc) are under 0.005mm The kerns with hydrostatic bearings and temperature control to prevent thermal expansion have 0.002 - 0.003mm repeatability (2 - 3 micron!!) That's fkn crazy!!! Lol I need to build one for making watch parts, I need at least 0.008 repeatability for watch parts that will be flawless. It'd be great to know where your cheat sheet would put us at? I suspect if you get on those numbers we'd be talking a very precise machine similar to the Haas quality if not better. I'd love to hear some opinions!!
@CNC4XR72 ай бұрын
well if I ever get the machine finished I'll post the results. but this is a retrofitted machine not originally meant for CNC. but hoping for pretty good results.
@AcidVFR400R2 ай бұрын
Always loved your work
@CNC4XR72 ай бұрын
Thank you! Cheers!
@eddies66692 ай бұрын
hello, I have a question, mach3 lathe, will go to tool No 0 on M6, is there a way to fix that, i have it on autoamatic tool change, if I run that program on the mill it will change on the tool number tab, but in the lathe tab it wont,
@makosharkcnc77302 ай бұрын
did you ever had to do any work with the Z gibs?
@CNC4XR72 ай бұрын
No I haven't done anything since the original Conversion. This this amazes me. I routinely run parts for hours at a time. with no issues. last 2 days were 5 and 7 hours non stop.
@user-oq9ml8jb1t2 ай бұрын
Sir, I have another doubt..! Can We find or calculate the total travel distance of G-codes in mm/inch ?, I mean The total cumulative distance all 3 axis combined to finish a particular G-code...! I was thinking about how to charge for machining cost on a cnc router, based on axis intensity and distance...! simple 2.5D carving/grooving jobs and highly detailed relief carving jobs using all three axis are different very much , right? So combining all distances on all axis will give us the cumulative figure of distance 1.00hr running X and Y only for 2.5D Carving is different from 1.00hr running X and Y and Z for a relief carving So We have to consider all axis included in operation.! Is there any method for this type of calculation..! Is it complicated? or nonsense?!
@CNC4XR72 ай бұрын
in mach3 top under operator/ maintenance hours it will give you the distance traveled for each axis.
@marionburchett68732 ай бұрын
You haven't posted in a long time. Hope all is well.
@CNC4XR72 ай бұрын
Yes just super busy. Thank you
@Algone_112 ай бұрын
Merci infiniment pour cette initiation.
@CNC4XR72 ай бұрын
you are welcome
@edkcustoms2 ай бұрын
Hi Sam! ive been thinking about making the same sort of system for my mill, i dont think i understand the 2:1 ratio. So let's say for example my head up and down movement is 15 inches i would need, to be safe a spring that's like 8 or 9 inches of extension right?
@CNC4XR72 ай бұрын
Yes
@edkcustoms2 ай бұрын
@@CNC4XR7 Thanks!
@amaythakkudu38392 ай бұрын
This stuff is very hard to digest , I have not even been able to understand the concept, can you do a beginning level video explaining how tool change macro works, using two tools example, I have tried to study, but not at all getting the basics, please do explain, how the m code for tool change is handled by the controller and mach 3. And how and when the relay is turned on to release the tool from chuck and moving to New location and accepting New tool and all', can you explain in simple way, Mainly how to think, in a perspective of a 3 axis cnc router guy
@CNC4XR72 ай бұрын
I have several videos. On this subject.
@dianedrollette97602 ай бұрын
Only because of the music
@CNC4XR72 ай бұрын
😂
@techristopher80772 ай бұрын
This machine will kill you and make you hurt the whole time it kills you
@CNC4XR72 ай бұрын
Not for use by the novice. For sure
@jacquewarnars86232 ай бұрын
I'm back and forth a lot with my rotary table and the vice. Other than that, it's pretty much a wash.
@CNC4XR72 ай бұрын
It all depends on what your machining . To be honest.
@JewelerAR2 ай бұрын
Masso has a problem whit indexers ABC
@CNC4XR72 ай бұрын
Thank you for the information.
@karunamoydas23892 ай бұрын
Sir please mach 3 tapping cycle tutorial ?
@CNC4XR72 ай бұрын
I no longer use tapping. I exclusively use a treadmill works very well.
@irforex2 ай бұрын
Hey, can you please explain tool change on flatbed linear cnc ?
@CNC4XR72 ай бұрын
There are videos on this subject.
@SteveInFLALand13 ай бұрын
Great video. I'm trying to save this video but there is no "save" button. Do you know why?
@CNC4XR72 ай бұрын
I'm not sure but it should be in your watch history
@danibadalov61213 ай бұрын
What is the name of your old machine?
@CNC4XR73 ай бұрын
Value craft sold by true value hardware
@diosdios33073 ай бұрын
To much Money for that Little shit. U can do Better by urself
@VWonder7373 ай бұрын
Thanks. Learning new skills on a budget.
@CNC4XR73 ай бұрын
Your welcome
@tdot24133 ай бұрын
Have you calculated the max shot you can do with this?
@CNC4XR73 ай бұрын
No not really however the tool forks are about half a shot.
@johnward58903 ай бұрын
Why not fill in the Dovetail area with steel bar stock machines to fit in the bevelled area and bolt them in place in a few places then machine those to fit the Linear rails to them.
@CNC4XR73 ай бұрын
That would work well however you need a machine large enough to do the machining.
@johnward58903 ай бұрын
@@CNC4XR7 all you need is a machine large enough to machine the smaller bar stock to fit in the dovetails to make it all the same height. you might be able to use a grind stone in a hand router to surface the top flat with the other surfaces. a machinist finds way to repair and machine out side the box that how it always been done back before all these NC machine, i worked for Linamar machines in the 1980's and did things to get the parts right that wasn't in the normal machining handbook and i worked on military missile and guns parts with machines that where at that time old manual milling and lathes. we used them to make the prototype PLC machines to build the missile parts where each operation was started by the last operating ending point.
@peart433 ай бұрын
Can I have the download link for the software you are using?
@CNC4XR72 ай бұрын
you can find it on the website. www.cnc4xr7.com
@MamunurRashid-il4rj3 ай бұрын
Can I run a lathe threading tool for a thread mill operation in milling.
@CNC4XR72 ай бұрын
I'm not sure I guess it depends on what the tool looks like.
@cham6094 ай бұрын
Cuanto cuesta esta actualizacion para esta maquina?
I have a problem with my extruder not extruding. Tried cleaning it from both ends and this was after having replaced those tubings as mine broke. Thankful you have this video up.
@CNC4XR74 ай бұрын
Can you manually push filament through when hot? you may need to disassemble and heat with a torch then push trough a wire to force the burnt gunk out.
@ChatBot13374 ай бұрын
I have tried messaging Monport several times with zero response. If I understood correctly, standard m55 lenses will work on this machine with the adapter? Both in terms of focus, power, as well as 'it screws on'. I see no m39 lenses sold as accessories but also absolutely no mention on the site whatsoever that these GP machines can swap lenses. I just don't want to get stuck in too small of a work area as well as be detailed when I need it.
@CNC4XR74 ай бұрын
The GP 30 Has a wide enough range that i doubt you will need to swap the lenses. I have been using both of mine for various projects and have yet to swap the lenses. Even though I did purchase a couple different lenses for my 20 watt laser I have yet to install them. I have marked as small as print 2.5 mm to large objects like the Slate coaster project this Christmas. with no issues. So unless your certain you need a different lens I would not be too concerned about it. I like both Units. Power feed on Focus is nice. having the cabinet below is also nice the noisy is not at the level your sitting. Just personal preference.
@maxortega80734 ай бұрын
oh man id love to buy a kit from you iof you still sell them I keep having a problem where that part you replaced pushes out from the extruder and its very annoying
@CNC4XR74 ай бұрын
I do have a couple kits left G mail me at my KZbin name
@pelleas70014 ай бұрын
If not for his voice, I'd think this was DSP reviewing drill presses (in the entirely mythical reality where he'd event remotely know how to use a power tool lol). The camera rocking is even present (though nowhere as extreme).
@CNC4XR72 ай бұрын
thanks I think! LOL
@kennykash60895 ай бұрын
Kudos on the modification. You got a potato to record video and audio!
@CNC4XR74 ай бұрын
yes a long time ago
@maxcox60195 ай бұрын
Most coolant in machine shops should be between 5 and 7 if your cutting aluminum higher is better. But. 6 is offel low in my opinion.
@joels42085 ай бұрын
Fantastic video. One question, you sanded down the top of the spindle to allow the top bearing to slide over the spindle with less effort. I am replacing the bearings on my PM833 which has an almost identical design. What is confusing me is that the top bearing fits very tightly on the spindle. How loose did you make it. Does it still have some friction when you slide on the top bearing?
@CNC4XR75 ай бұрын
Place the spindle in the freezer and put the bearings in the sun. That should do the trick
@joels42085 ай бұрын
Thank You!@@CNC4XR7
@chestergt77655 ай бұрын
This seems wort the price. How does it work with a part finder probe? Ill pribably ne buting this in the mext couole of weeks. Im usung tbe PA screen set, but i want more outa it.
@CNC4XR720 күн бұрын
email me
@nickmcdaniel6106 ай бұрын
Whats the frequency range?
@CNC4XR74 ай бұрын
Not sure if this is what your looking for but the wavelength is 1064nm more info on the Raycus laser can be found here. en.raycuslaser.com/view/2032.html
@nickmcdaniel6104 ай бұрын
@CNC4XR7 oh I meant kHz freq. Not wavelength. Advertised it's 40-60, but I seen in your videos you running from 20-80. So I wasn't sure.
@CNC4XR74 ай бұрын
@nickmcdaniel610 yes I normally run @20
@Coopdeville066 ай бұрын
I’m very interested in your kit for the seig x2 if it will fit my wen
@Coopdeville066 ай бұрын
@@CNC4XR7 are you the guy that I spoke with on the phone a about an hour ago?