They maybe the best engines on the market, I’ll probably never know lol. The hemi v8 is a tried, true, and reliable engine in my opinion. The inline 6 Cummins engine is the only 6 cylinder that I like.

@@andylawrence8352 thank you!

@@vcash1112 I prefer a 6ft bed, but the majority of 1500s have crew cab and a 5ft bed. Need the car seat space more than an extra foot of bed. Don’t see many suvs with v8s lol to each his own

@@ImaginaryPrime thank you so much! Thank you for commenting also!

@@25-8 don’t hold me to it, but I believe it’s .105 Oregon string ? I weedeat so little, I’ve had that string probably 5 years and the plastic dry rotted and fell apart lol

@@WillD-l6o grass is thicker than the camera shows, but the blades haven’t been sharped or changed. Cutting lower that what landscapers do, but I’ve cut it that low for 10 years. That’s what I like.

@@WillD-l6o if I would’ve cut higher the first time then went lower it would’ve done better. And a 48 inch deck isnt cutting as much grass as a 54 inch with a Kawasaki fr691v (23hp) engine. Mine is cutting quite a bit more grass than a 48.

@@LeonardoMigot honestly what I’ve got works good if I mow it regularly. It’s been about 2 weeks and my lawn grows fairly quick when we get rain like we have been lately. If I had the money I would definitely upgrade though.

@@GreenMtnTractor you never to think 🤔 about to increase the rpm speed engine from your lawn tractor mower zero turn radius

@@GreenMtnTractor with a screwdriver 🪛

@@codyschutjer5725 yes I apologize I didn’t clarify in the video, it is mixed gas. I just run gas without ethanol. The ethanol deteriorates things much quicker

@@Chestnutmountainhomestead will do bud, thanks for commenting!

Oops 😂

@@peted5217 video. lightening is at the beginning over the barn

@@RoseKBRobinson I always enjoying watching a thunderstorm!

@@LazyWeather-w-Spence thank you!

Thank you!

@@bigsonslawncare thank you!

@@TheMik088 maybe the front yard one day lol when I get good at putting.

Thank you for commenting. I have not changed the hydraulic fluid yet. The yellow end dipstick for the hydraulic and transmission is next to the differential lock pedal on the right side. Manual says to change this every 750 hours. And yes the one with the rubber boot in the floor pan is for the fluid. I don’t have a socket to see how big the plug is for the fill cap. Biggest socket I have with me is 1 inch and it’s bigger than that. There are multiple grease locations, obviously down both sides of the loader( 22 total for the loader) . There are grease fittings underneath the brakes and clutch, for the top link on the 3 point and both bottom links for the 3 point for the up and down adjustability for both sides. Also behind the front wheels right about the axles. Many of these are easily over looked, when it’s time to grease them I would take my time and look for any moving part and more than likely it will have a place to be greased. And it has a hydrostatic steering system, manual says there is no exclusive reservoir and fluid for the steering system. This system is controlled by hydraulic power. Manual doesn’t include anything about maintaining power steering system. I hope this helped.

@@GreenMtnTractor thank you for your reply. I have just started using this model on a job and I am getting familiar. We bent a hydraulic cylinder, We were replacing culverts and cutting a dam on a live pond , that was about to blow out, so things got hairy. Anyhow, we got er done and save the pond but using the grapple, in a tough situation , lost the right cylinder. Got it repaired and lost fluid, so I'm trying to get more fluid and get her filled up, before things do go south. Lol. So thanks for your info. On grease fittings, you are so right. I own Year 2012 mf2635 that has been a warrior, and got my boss to go with this scaled down 2606h mf, that is a little beast as well aka little brother. 😅But I was out looking over my tractor, just now and found a fitting in the front axle, pivot. It's in the front under the radiator ( in the center of axle, where the three structural ribs are located) on the left side, looking from the front . It is hard to see. I'm not sure I've ever seenn it, maybe once but, is there. So that leaves 5 fittings in the front axle, if I'm correct. Anyhow, there's a bolt missing in the front of my pivot arm, I just found. So got to get that replaced. I don't know if the 2606h has this " grease fitting" but the offset pumpkin and everything looks the same, so you might check your unit. So thanks again 👍👍

@@SkyHawk975 I’m glad I could help! The grease fittings, some hidden in plain sight and some just hidden lol. I found a few that I’ve missed when I started counting them lol. Hopefully you can get everything back and running. They are fairly simple machines, I wish I had a few more tips on changing the hydraulic/ trans fluid, but any little bit I tried to help. Thank you for watching and commenting!

Thank you! I looked into a Kubota for a while and when I first seen the Massey 2600 and started looking into it it reminded me of being with my paw riding on his old Massey.

Thank you! And thats not a bad idea! lol

Hey, thanks for watching!

Thank you!

That’s usually what I do to keep from having to hoe all the weeds out. Had a good crop of potatoes last year though.

Yep lol

Thank you for commenting 😊

Can’t beat fortunate son! Song makes about any video good

Will do. Thanks for watching and commenting!

Thank you! I hope so too. We got quiet a bit last year in the same spot

You’re welcome I’m glad I could help! Thanks for watching!

It probably would help the big garden doing that, or I could adjust the 3 pt a little but, I didn’t want to pull up and back up 100 times I just run it long ways where I can lol thank you for watching

Thank you!

Thank you! It does very well together

Yes sir! I like it better than the land pride reverse tiller I had. Reverse tilling does good but it drags to much dirt to the end of a row.

Thank you I really do appreciate that it means a lot. I never really knew I had an accent until I got older. I’m proud to be from western nc I just feel my accent is worse than most here lol. As long as y’all enjoy it I’ll do my best to keep to keep making them.

Thank you! I owe a lot to you, I’ve been watching your videos for a while. I’ve learned a lot from you, and hopefully will continue to learn. I won’t be as good as you, but hopefully I can be a little entertaining lol thank you for sharing Ben!

It’s a Massey Ferguson 2606h

@@GreenMtnTractor oh that’s a nice tractor

Thank you, it’s been a pretty good one so far

Was taken 6 or 7 years ago, transmission never come out

Husqvarna 562xp

@@GreenMtnTractor that's what I thought how do you think they handle a buried bar

@@allaboutgears98 it does very well. It doesn’t bog down as much as my 445 husky. If you cut quite a bit of firewood it’s a very good saw to have.

Thank you

😂 I heard that helps for cold mornings lol

@@GreenMtnTractorlol ya extra hp gains too

lol without a doubt, flipping out the moose mirrors do that as well 😂

@@GreenMtnTractorlol of course 😂