2014's aren't the same.....

Thanks for the help! Is it a regular rca jack? I'm asking because I have to order one my brake was to close to connecter , no luxury of splicing for me.

THANK YOU SO MUCH

Why wouldn’t you show how you partly took it off??

I have a 2010 venza and the high beams aren't working. Bulbs look good and the fuses look good. Don't know what's the issue . Any ideas?

Hi Scott, Can you do a headlight assembly replacement video for that Venza?

I twisted mine came out in whole with the two plastic trims plus mirror

just a heads up,most times these aftermarket lights and i mean almost all of them will let in some moisture. i know this because a auto zone worker told me and it happened to me. he said to avoid the problem just tape off the two sides that meet and run a small bead of silicon over the seam thin it out with your finger and remove the tape let dry. the other thing is the rear gasket most times is too thin use the o-ring fron your old bulbs and add it to the new bulb. it will create a tighter seal.

What led bulb did you replace with

Question: has anyone found a better quality replacement window crank handle in the world that fits this Fiesta?

were did you buy the replacement?

my car is venza but your car is camry. are they the same?

You are sent from fucking God. I donate my ticket to heaven.

I needed to replace the front door speakers in my 2014 Fiesta S with out power windows. There is a trick to it and NO TOOLS ARE REQUIRED!! You simply grab the handle and cantilever it into the door, push it away from you and it pops right off no damage done. Looking at this picture you can imagine which direction to push it. The two tabs are there to hold the half circle against the metal arm locking it in place. Once you cantilever the handle into the door the tabs relieve the preasure and the handle comes right off. It'll pop back on no problem and hold into place if you didn't push so hard the tabs break.

I’m replacing mine today, they were worn, so getting them off wasn’t hard, but I’m hoping the new ones pop back in easily.

I don't freaking understand how to twist it out

Ford sells a tool

2+ years later.....BIG THANK YOU! Took about three minutes to get it off after switching to the biggest flat head screwdrivers I had.

This car is full of dumb designs. Thanks for the video

Not very good, it's a wonder how he didn't break it

Rubbish

Is it a pain putting everything back on? I'm planning on switching mine from the gray that came with it to a black version, as I think it'd look nicer with my otherwise dark interior. These videos really help with understanding removal... just wasn't sure about putting the new one back on. Also, you local to the Seattle area too? I saw the WSDOT Good To Go sticker on there. ;)

tnks 4 your help.

thanks for the help!

Thank you. I have a Ford Transit Connect 2013 and it has the same crank. No spring clip!!!!

what does the button on the mirror do

Heck, it took me hours trying to figure how to get it off........!!!!!!!!!!

no. it is a pain in the butt. you might swing by the Audi dealer, and ask him if they can do you a favor. No doubt, they have one guy there that is a pro out it. But it is a total pain. Sometimes, you can take a screwdriver and bend the clips in just a tiny amount to make it more tight. And then when you twist, it might stay. You can also spray a little silicone spray on it so it doesn't have so much friction and want to tweak when you twist it on

Is there a problem with the Audi rear view mirror coming off or breaking off?

thanks for the video it helped me a lot

thanks a lot

So, the other day, my mirror just fell off while cleaning windshield. Now, if I put it back, and try to adjust, it just turns counter clockwise and falls off with ease. If there a retainer that has to be placed to keep it screwed in place?

Thank you.

How t put the plastic bottom piece back on is the real question.