Best video yet! Loved seeing an updated version of my Brother and what he does for a living. P.s No details are boring to understand. Good job, keep up the great work
@onliiine1Ай бұрын
This is wrong btw
@magena89557 ай бұрын
Im having an issue adjusting the seat. I pulled the knob off after loosening and it doesnt move.?
@destinationtrucker27967 ай бұрын
I will try moving it backwards see if it’ll move backwards and then move it forward, but as long as the pain is out, then it should slide forward and backwards, and may be stuck due to being set in that position
@runaway_369 ай бұрын
Is the seat adjustable to for the your height ?
@destinationtrucker27969 ай бұрын
Yes, the seat is adjustable for your height
@gnutzguy Жыл бұрын
did you install it behind? was the angle correct?
@destinationtrucker2796 Жыл бұрын
Yes, I installed it behind and the angle was correct
@gnutzguy Жыл бұрын
@@destinationtrucker2796 thanks. I will do the same
@gnutzguy Жыл бұрын
@@destinationtrucker2796 I'm at the store and I can't see how the support post could be the correct angle. Did you mount it different?
@destinationtrucker2796 Жыл бұрын
I don’t remember I would have to look at it again
@gnutzguy Жыл бұрын
@@destinationtrucker2796 no worries
@nicblack6542 Жыл бұрын
The camera position is not on the machine
@Michael-uo4jj Жыл бұрын
Man your giving them to hard a time alot of the employees are young and inexperienced especially if you go to a location without a licensed technician
@thedude12752 жыл бұрын
How much does a garage that size cost total?
@destinationtrucker27962 жыл бұрын
40,000 Canada
@thedude12752 жыл бұрын
@@destinationtrucker2796 thank you
@bennyhultofficial2 жыл бұрын
This vid would have been so much better with the engine speaking instead of music.
@georgepyle56262 жыл бұрын
Bag Explorer buy Toyota Tundra transmission can’t tow its bad tranny
@williamchapman21342 жыл бұрын
𝖕𝖗𝖔𝖒𝖔𝖘𝖒 ❗
@johndrennen83422 жыл бұрын
Did you get an undersized, oversized, or regular sized replacement bearing? I'm about to do the exact same job on mine and when I started looking at replacement bearings I found out there are many options. Thank you!
@destinationtrucker27962 жыл бұрын
You are very welcome I’m glad that I could help you out I would go with regular bearings unless you wanna go with more of a higher grade to help make your vehicle last longer but normal would be standard for any vehicle and I would suggest probably standard because it seems to work the best overgrade may cause other issues but I am not an expert in all means
@elderlynk2 жыл бұрын
Get it right there shocks not struts lol
@destinationtrucker27962 жыл бұрын
You were waiting lmao
@elderlynk2 жыл бұрын
@@destinationtrucker2796 I was lol
@firstname83482 жыл бұрын
Not helpful at all, can barely see what you're doing
@BareRoseGarage2 жыл бұрын
Nice old T-Bird man! Glad I found you in all this digital soup & hit that thing up there to see more!
@adrianzamora67852 жыл бұрын
What size is the socket to remove the piston bolts?
@destinationtrucker27962 жыл бұрын
I’m not positive but I believe the bolts for the bottom of the piston rod oh 10 mm
@adrianzamora67852 жыл бұрын
Thank you..i went to autozone to find out also and they told me is a 10 mm 12 points.
@Bigjay888882 жыл бұрын
I have the same issue
@destinationtrucker27962 жыл бұрын
So what I found out after trying to figure that out what it was when they change the alternator they changed it with a different alternator which didn’t charge the same voltage as the one that was in there so it was the wrong alternator for the car so I would definitely check your alternator if you recently replaced it
@Bigjay888882 жыл бұрын
@@destinationtrucker2796 i just had mine tested it shows 0 voltage
@Daves123able2 жыл бұрын
Would you happen to know the name of that engine?
@destinationtrucker27962 жыл бұрын
Sorry I’m not sure all I know is it was a 99 Toyota corolla
@cabinetchaibi89142 жыл бұрын
It looks like a 2zz
@Ifixstuf2 жыл бұрын
It's a 1zz
@livingonlysclassics Жыл бұрын
Boi it's a 1zzfe with 140 hp 2zzge makes 250 hp 🤤
@donnabeech74802 жыл бұрын
Your assembly is off-camera
@xxzyzzx3 жыл бұрын
Im going there on 2 days! My mom and I will be riding the roller coaster
@destinationtrucker27963 жыл бұрын
It definitely is a fun ride we’re going there next weekend
@aquachicken92973 жыл бұрын
5:26 That ride is THEE FUNNEST! It's like my favorite! If you manage to somehow get the courage to go on it, you WILL NOT regret it! Highly recommended
@aquachicken92973 жыл бұрын
I challenge you to go on it once before you end the trip... (you do not have to accept, but it would be nice if you would) :)
@destinationtrucker27963 жыл бұрын
I will be heading back down there in October we have season passes I will check it out then
@aquachicken92973 жыл бұрын
@@destinationtrucker2796 😁
@stephenmackinnon1583 жыл бұрын
They fighting already haha..love it
@aquachicken92973 жыл бұрын
Verry cool job! Must be nice to be self-employed. Congrats
@destinationtrucker27963 жыл бұрын
It’s nice being my own boss
@aquachicken92973 жыл бұрын
@@destinationtrucker2796 T'is what I thought, you're livin' the good life :)
@tonymayhew1913 жыл бұрын
I would run a one Guage welders wire from the back of the alternator where you see a bolt hole already drilled and tapped. Run the wire directly to the negative side of the battery and WA La!!! You just ilminated all your grounding issues and all your sensors will thank you 😊
@mtlfilmaker59443 жыл бұрын
You’ve show us nothing 😭
@lowkey58173 жыл бұрын
love this vid!
@rinwinkin3 жыл бұрын
I THINK I REMEMBERED YOU NEAR THE ENTRANCE, I SAW YOU JAHFJKSHDFJK
@aquachicken92973 жыл бұрын
I'm glad the weather cleared up for you at the end, long drive from Edmonton to Calgary
@ryans4133 жыл бұрын
Only roughly 2-3 hours from Edmonton to Calgary
@aquachicken92973 жыл бұрын
@@ryans413 3 hours… but still a pretty long trip
@edmamon46553 жыл бұрын
Distributor cap is working eh????
@augustharlacher56603 жыл бұрын
Hey ED, There is no Distributor cap!!!! It's called a coil pack!!!
@edmamon46553 жыл бұрын
@@augustharlacher5660 August..... look up sarcasm in the dictionary.... DA
@augustharlacher56603 жыл бұрын
@@edmamon4655 I don't need to look up anything ED! I was just trying to educate you on ignition systems! Sorry you took it the wrong way! Have a good day ED!
@edmamon46553 жыл бұрын
@@augustharlacher5660 again... look up sarcasm after you listen to the video at 3:50 - 400.....
@augustharlacher56603 жыл бұрын
@@edmamon4655 Why should I?? I made a comment! obviously you got upset! And that's on you ED. C'MON ED! If I rubbed you the wrong way I apologize!
@deathstock19063 жыл бұрын
Aha no longer the only comment
@crysclarke3 жыл бұрын
Thanks!
@theonlyhaykel3 жыл бұрын
great video bro.
@sanayamoore11243 жыл бұрын
Cool 😎 🆒️
@nashhenry93143 жыл бұрын
Thank you for making this video
@nashhenry93143 жыл бұрын
They are some parts I don't understand how to put together fully
@nashhenry93143 жыл бұрын
What does this machine target I was hoping you'd zoom on the parts that you put together
@aysanarocks3 жыл бұрын
I just bought the bike today I am excited to try it, have u had any issues since you last posted this video? and did you figure out the screen?
@destinationtrucker27963 жыл бұрын
I haven't had an issue with the bike since I got it and just make sure when you're connecting it that all three plugs are connected in mind they were stuck up in it I didn't even know there was a third set of plugs but never had an issue after I fix that
@VibeVistaX2 жыл бұрын
How's the bike holding up so far? Some says about worn out belts, no more resistence..etc. Other than that, I see many positive reviews.
@elderlynk3 жыл бұрын
Can’t wait to help u with your next project
@aquachicken92973 жыл бұрын
Wow, I'm the only comment... That's kind of surprising.
@destinationtrucker27963 жыл бұрын
Thanks we're planning our trip for this summer to and if you like the content please hit the Subscribe button and help out the channel it is trying to grow
@aquachicken92973 жыл бұрын
@@destinationtrucker2796 I have no idea how many subscribers you have but sure. SMALL CHANNELS UNITE!!!
@elderlynk3 жыл бұрын
Now I wish I was there to help
@elderlynk3 жыл бұрын
Nice
@brianmcdonald14993 жыл бұрын
13.5 to 14 volts is normal..takes power to run electronics
@bensanterre94783 жыл бұрын
I was hoping to find out what tools were need to put this thing together. You said tools came with it, but I saw you using a drill gun at one point. Can you put it together with the tools that come with it, or will we need to have other tools as well? Thanks.
@destinationtrucker27963 жыл бұрын
Yes you can use the tools that comes with I was just speeding the process up by using the drill
@elderlynk3 жыл бұрын
Nice video
@bettykent4263 жыл бұрын
fix your code??
@destinationtrucker27963 жыл бұрын
Yes it was the alternator
@bettykent4263 жыл бұрын
but you changed the battery that was the PO300 code the alternator?
@destinationtrucker27963 жыл бұрын
@@bettykent426 the battery was bad too but it was the alternator sending the code on proper charge
@AndreinaJ3 жыл бұрын
Does it make loud noise?!
@destinationtrucker27963 жыл бұрын
I'm not sure what you're asking but it is pretty quiet if that's what you're asking
@AndreinaJ3 жыл бұрын
Oops auto correct! Yeah ! I was asking about the machine noise
@destinationtrucker27963 жыл бұрын
It is very quiet it doesn't make any noise works amazing for the price
@ellaraines923 жыл бұрын
I was able to recovered mine using siepker_hacker on instagram,whom i was referred to
@destinationtrucker27963 жыл бұрын
That's good man it sucks when someone takes s*** like that it's kind of petty and pathetic
@davidlynk30173 жыл бұрын
good job
@eduard-js6mr4 жыл бұрын
Bro just build it don't need to explain
@destinationtrucker27964 жыл бұрын
You could have just not like that you didn't have to tell me