Have you considered the effects of the 1.8% compression of the water down at the Titanic?
@theeverydayengineer14 күн бұрын
@@StevenStyczinski-sy8cj I have. All it does is add that little bit extra of compression forces, that is negligible to the forces provided by the overall depth and since I am also making estimates on the size of the submersible.
@StevenStyczinski-sy8cj5 күн бұрын
Thank you very much for your excellent video. You are the first one to even mention about the end pressure on the ends pushing in. My calculations came up to only about 19,000,000 pounds because of a smaller diameter. But l applaud you for considering that at 20 million pounds pushing in there is no way one of the domes just fell off; as some have suggested. I thought that the temperature coefficient of carbon fiber is negative against titanium’s positive coefficient is something that should be of concern.
@theeverydayengineer15 күн бұрын
Thanks. There will be different coefficients of thermal expansion, but I doubt that has much to play here since there isn't a huge temperature difference between the room temperature where it would have been assembled, and the ocean floor.
@chess_on_toilet10 күн бұрын
Si Monsanto is good yo soy un bot
@theeverydayengineer19 күн бұрын
@@chess_on_toilet from Astroturf to Round-Up!
@jennykesecker647313 күн бұрын
Take off your shirt!
@thriftykitchen709513 күн бұрын
Thanks for sharing!
@stoundingresults17 күн бұрын
We could bring back the Model T basic car, but too many sissies wanting seatbelts, airbags, decent brakes, etc.
@theeverydayengineer117 күн бұрын
@@stoundingresults I wonder how a basic car like this would even sell today with not much protection from the elements? Everyone likes to pay a lot more for all the modern creature comforts in their cars.
@j29maniac16 күн бұрын
No radio, hand-crank start, no heat, no power steering, no turn signals, no AC, harsh ride, underpowered, no cruise control, etc. Ahhh, the good old days!
@gamingballsgaming13 күн бұрын
what about those little electric plastic French city cars? those are pretty bare bones...
@stickynorth17 күн бұрын
Good luck trying to find a car for $28K in the USA these days much less an electric one... That's why I think all BEV's under $25K should be allowed into the NAFTA zone tariff free. If you can't build 'em, you might as well buy them... Keeping them out will ultimately be as successful for the existing OEM's as much as Boeing was suing Bombardier/Airbus trying to prevent the superior A220 from happening... NOPE!
@NoName-ik2du19 күн бұрын
Frankly, I'm more shocked by the *80%* inflation rate from 1909 to 1924 than anything else here.
@theeverydayengineer119 күн бұрын
@@NoName-ik2du there was horrible inflation during and right after World War 1. Something like 80% inflation from beginning to end according to some sources.
@jeffpiatt387919 күн бұрын
The reason that today's cars are so safe is that they are so expensive you can't afford to buy one and die in it.
@Frusie19 күн бұрын
Kingsford is owned by Ford?
@theeverydayengineer119 күн бұрын
@@Frusie it is owned by Clorox now. I guess it was part of diversification sometime in the past that Clorox would have it.
@asciicatface19 күн бұрын
good video
@theeverydayengineer119 күн бұрын
@@asciicatface quick and to the point.
@buckdesystem456219 күн бұрын
I would pay $5,000 for a showroom condition Model T just for the fun of it.
@theeverydayengineer119 күн бұрын
@@buckdesystem4562 I wonder what one in such condition would go for today? I know someone who has a few Model T’s but nothing in fully restored condition.
@AFTER_MIDNITE19 күн бұрын
You and me both. Heck, based on old videos them, they look like they’d be excellent off road vehicles.
@theeverydayengineer119 күн бұрын
@@AFTER_MIDNITE I have seen those videos as well. It would be interesting to test one out. They had to be good for old rutted out dirt roads in their time.
@Kaisan-vc8fw20 күн бұрын
BYD Seagull ... c.$12,000 .... An excellent quality EV car, no joke. Of course Americans cannot buy them at that, because of 'Tariffs' America applies of 100% tax on top, plus some other 'compliance demands' to make sure American auto makers can continue to make cars which are over priced on the world market 😂 Must be so great to be so 'free' in America … Pass the AR15, I wanna go buy some food and try to be safe at the same time. 💩
@theeverydayengineer120 күн бұрын
@@Kaisan-vc8fw yep…compliance demands in the American car market don’t help making cheap cars available here.
@theeverydayengineer119 күн бұрын
@@Kaisan-vc8fw I also remember seeing some articles of Tata out of India wanting to sell cheap cars in the US. It never took off. Politics and regulations probably killed it.
@mattsommers411119 күн бұрын
Pos Chinese car will probably catch fire while spying on you
@NoName-ik2du19 күн бұрын
@@mattsommers4111 The irony here is that an American-made Tesla will do exactly that as well, just at a _much_ higher price tag.
@stickynorth17 күн бұрын
@@NoName-ik2du Bingo! The Sinophobia is strong with that one... Which is MOST hypocritical since he's probably typing it furiously into a keyboard made in China, connected to a computer and monitor made in China, while wearing clothes made in China, while snacking on a belly full of food from China... SMH... Replace that with ISRAEL OR THE USA and you can see how stupid and offensive it is on its own..
@alexmaccity20 күн бұрын
290 * 1,800%
@jamesslick479020 күн бұрын
WOW! in 1924 a whole NEW CAR cost not a hell of a lot more than a well optioned Honda Super Cub 125 SCOOTER costs now (Inflation adjusted).
@theeverydayengineer120 күн бұрын
@@jamesslick4790 yes, pretty darn shocking. No wonder it revolutionized the world.
@jamesslick479020 күн бұрын
@@theeverydayengineer1 It's CRAZY shocking as (As i said) it was "cheap" by 1924 standards, It was SUPER cheap by 2024 standards. AND I'm FAR from a fan of Henry Ford. (I'm Jewish, so there IS a "thing" going on there) BUT Still, It's an AMAZING car! The 1920s WERE where the modern word began! I'd NEVER buy a Ford (BUICK for me, LOL) But I havta admit the Model "T" Ford was probably the most important cars in US (Or even World )history
@weebercorey20 күн бұрын
OMG I love my 2022 Honda Super Cub!
@jamesslick479019 күн бұрын
@@weebercorey Well, They ARE pretty damn cool!
@jjwmmw3 ай бұрын
😊
@josevillanueva50613 ай бұрын
😎
@JulianMakes3 ай бұрын
Honestly, when I saw the clip of them mixing the ‘glue’ and the application I was floored. Glueing dissimilar materials is so hard. What were they thinking.
@badabingbadaboom174 ай бұрын
If the ruler/piece of wood is perfectly covered by the piece of paper, is it possible to "break" the piece of wood?
@ArialFest174 ай бұрын
Pretty sure!
@jonathantebo54594 ай бұрын
Yes, but you have to whack it pretty hard.
@theeverydayengineer14 ай бұрын
If you got the golf ball moving fast enough you could break the paint stick even without the paper present. The shock of something going extremely fast would put more acceleration on the paint stick than its structure could support.
@badabingbadaboom174 ай бұрын
@@theeverydayengineer1 Yeah! That seems possible!
@tyeralexander73464 ай бұрын
Every one keeps saying thats Eddie killed Sears and that id false he didn't kill Sears its was already struggling long before he took over the company
@theeverydayengineer14 ай бұрын
Yes, but he likely put the final nails in the coffin, but he didn’t build the coffin so to speak.
@john99bg4 ай бұрын
Nice and educational! Could have dropped it from higher just for the fun of it though
@theeverydayengineer14 ай бұрын
That would have been a great idea. Not sure why it didn’t cross my mind!
@flamingchillum4 ай бұрын
When they crack the oil at the oil refinery, they put 3 barrels in and 4 barrels of liquid comes out. What a scam. No tax on I/4 of your product........
@theeverydayengineer14 ай бұрын
Not sure how you get more out than you put in. Likely the other way around, that 4 barrels in gets you 3 barrels of fuel oils and the rest is heavier distillates and waste.
@flamingchillum4 ай бұрын
@@theeverydayengineer1 It is done inside the cracking tower. Long molecules are broken up to make the desire fuel types. This makes more drops and increases the size of the fluid inside the hi pressure cracking tower. Put 3 in and get 4 out....
@gregduck74554 ай бұрын
Thanks for posting this interesting video. I remember as a boy in the late 1960's reading about this project in some book I checked out of our local Edmonton , Alberta library. That book had a chapter about this air operated subway in New York City. I was fascinated by that. Also, the 1984 movie " Ghostbusters" did a reference to this 1870's era subway.
@theeverydayengineer14 ай бұрын
Interesting tidbit on the Ghostbusters. I might have to try and find that snippet from the movie.
@gregduck74554 ай бұрын
Great video, I like the images of the pre-1913 Grand Central. That old Grand Central Station must have been amazing, the ginormous arched roof it had reminds me of the St. Pancras " Barlow roof" in the London, England station.
@theeverydayengineer14 ай бұрын
Glad you enjoyed it.
@arfriedman45774 ай бұрын
As kids we had a sears catalog to look at while our parents waited for something they ordered at the store We used to shop at sears and kmart growing up. In hs, i worked at the kmart snack counter a few months.
@theeverydayengineer14 ай бұрын
Sears and Kmart were staple stores to shop in when I was a kid as well.
@arfriedman45774 ай бұрын
@theeverydayengineer1 we went to times Square stores, tss, a lot. Nyc.
@Throughthelurkingglass4 ай бұрын
A multitude of corporations that didnt exist when Sears was created all competing with Sears, and Sears was not able to compete.
@theeverydayengineer14 ай бұрын
It’s hard to stay on top forever.
@janebeckman34314 ай бұрын
I can't forgive them for leading to the demise of Orchard Supply, my favorite hardware store. (Thankfully, some are re-creating it under a slighty different name, but still OSH.)
@theeverydayengineer14 ай бұрын
Orchard Supply was not in my part of the country.
@NoMoneyG4 ай бұрын
Extremely sad, but I put the full blame on CEO Eddie Lampert for running it into the ground over & over. It's quite a disgusting tale of the absolute greed of one man. Great video!
@theeverydayengineer14 ай бұрын
Lampert surely put the last few nails in the coffin!
@tyeralexander73464 ай бұрын
Eddie didn't destroy Sears it's was already dead before Eddie took over
@NoMoneyG4 ай бұрын
@@tyeralexander7346 It was far from dead when he took over. It was on a big decline, but plenty of time to turn it around with the right people at the helm. 39.85 billion in sales is was not dead & especially 2012 money (twice as much as Amazon at the time). He took over in 2013 & ran it into the ground. It was all about him & his buddies stripping every penny from both Sears & Kmart for their own personal gains. It is what it is & still a shame for an American icon retailer either way. All from bad management hires.
@silentotto50994 ай бұрын
With Sears-Roebuck's history in mail order sales, I was always a bit baffled why they didn't jump into web sales once the internet took off in the 90s. They should have been Amazon.
@theeverydayengineer14 ай бұрын
Leadership was not able to comprehend the Internet? So they did not take the gamble?
@mjwbulich4 ай бұрын
@@theeverydayengineer1Even if they had the foresight they probably couldn't have pulled it off. Amazon took nine years to turn a profit. By the time Amazon came on the scene ,Sears mail order business was all but dead. Now Sears is going to shift gears and bet everything on internet sales. You have the lumbering behemoth that is Sears trying to keep it's brick and mortar operations afloat. They can't just pivot and lose money for a decade. Amazon has venture capitalist feeding it money. Where does Sears come up with that money?
@TheGravygun4 ай бұрын
It was a good run
@theeverydayengineer14 ай бұрын
Yep. A few lingering on but it is only a matter of time.
@gefiltefish67044 ай бұрын
Ya never know!@@theeverydayengineer1
@Stilicho198015 ай бұрын
Why show British locomotives?
@theeverydayengineer14 ай бұрын
My focus was on the building. Some train pictures may not have been 100% historically accurate, but were selected to match the narrative in that point of the video.
@jillthoma41145 ай бұрын
I constantly check Wallop’s to see when the launches are visible.
@robertpaupore46725 ай бұрын
Nice
@theeverydayengineer15 ай бұрын
Thanks
@ScandalousSnippets5 ай бұрын
Good thing I didn't discover that video when I was young and stupid LOL
@theeverydayengineer15 ай бұрын
I made far too many of them. 😂
@guitarista675 ай бұрын
Yep, clearest explanation so far.
@guitarista675 ай бұрын
Yep, clearest explanation so far.
@theeverydayengineer15 ай бұрын
Thanks. I could have covered more and in more detail, but it seemed long winded as it was.
@guitarista675 ай бұрын
Defies logic to have titanium endcaps GLUED with a mechanical bond at best to a dissimilar material. Plus the glue, titanium, carbon composite, and acrylic window all react differently to pressure and temperature. There needs to be an in depth investigation or book written about Stockton Rush, billionaire killer.
@theeverydayengineer15 ай бұрын
Yes, the mix of materials was not a good idea. The acrylic windows have been the go to for submersibles since fay one, but he flirted with disaster on such a large diameter window.
@pinedelgado47435 ай бұрын
I love it!!!
@theeverydayengineer15 ай бұрын
Thanks. Seems like a popular video style and topic. I plan to keep them coming.
@SofaKingShit5 ай бұрын
There was a similar means of propelling a railway in England in the late 19th C but it was just a small pneumatic tube that a much larger train was attached to so that it could run outdoors. Apparently they had significant maintenance issues such as using leather for the pneumatic plunger and a lard based oil for the lubrication resulting in rats eating away the airtight sealing and of course the compressibility of air. I would imagine that if the whole train was inside the pneumatic tube then that compression and the subsequent ear popping would be pretty noticeable indeed.
@PRH1235 ай бұрын
Although if the train cars were airtight... If the tunnel was only a few blocks long, then it would be OK... probably....
@theeverydayengineer15 ай бұрын
I will have to read about that one.
@coppeis5 ай бұрын
Great video but do invest in a better microphone!
@Brautman5 ай бұрын
It sounds very clear to me, he just seems far away from the microphone, as well, the acoustics of the room are very shabby.
@theeverydayengineer15 ай бұрын
I did record it in a different fashion that some videos I have in the works since then. It was in a small room, and I was some distance from it as Brautman mentioned.
@EarthenDam5 ай бұрын
25 cents a ride? That is $31.55 in today’s money! It was just for the novelty too. A proto amusement park in a kind of way.
@theeverydayengineer15 ай бұрын
Without TV, radio, and internet of today, people were desperate for some entertainment?🤷♂️
@EarthenDam5 ай бұрын
@@theeverydayengineer1 If I had the spare money I would absolutely have done it 😄
@theeverydayengineer15 ай бұрын
I might panic a little if it got stuck at the end of the tunnel.
@markmalasics34135 ай бұрын
Seems like a lot of the same images were used here that were also used in the PBS Documentary of The American Experience, New York Underground from 1997.
@theeverydayengineer15 ай бұрын
Very likely. Not very many photos, drawings, or pictures for something of that time period.
@SofaKingShit5 ай бұрын
Perfect. No AI😁
@Corwin2565 ай бұрын
This whole video was amazing. I sincerely hope my chance discovery of it wasn't a fluke and that the algorithm will be sending you many more viewers. You clearly deserve them.
@theeverydayengineer15 ай бұрын
Thanks. The algorithm doesn’t push this video because a few people gave it a thumbs down unfortunately.
@lvbdevinelove23296 ай бұрын
Finally! This is the best titan and whiteboard video of all time!
@theeverydayengineer15 ай бұрын
Thanks. I tried to keep it simple without getting too in depth.
@animestarlord9021 Жыл бұрын
Depends on options you have in 401k. Mine stocks tend to only get a 5% return at best or can go interest only with no risk for a 3% return.
@theeverydayengineer1 Жыл бұрын
This is true. Some companies are more limited than others, but there is most likely an option that follows the SP500 as it is one of the best investment strategies there is. Often it is called the “large cap” fund.
@animestarlord9021 Жыл бұрын
@@theeverydayengineer1 We don't have the option. Just a few target date funds or interest only.
@theeverydayengineer1 Жыл бұрын
I am sorry to hear that your fund options may be that limited. The furthest out target date funds would most likely track the S&P500 closer than near term target dates. In the long run those funds might do better than you think as they might have not been around for too many years, and currently 10-year average returns might not actually look so good since the market pull back the past 2 years.
@vernonz8897 Жыл бұрын
"Promo sm"
@theeverydayengineer15 ай бұрын
Thanks!
@Luncheon23 Жыл бұрын
Thanks for the encouragement. Sometimes it's tough to save money, but reducing the required investing amount makes it feel a bit more easy.
@theeverydayengineer1 Жыл бұрын
You can do it! Making meals at home more, buying fewer expensive adult beverages at restaurants and bars, and even buying cheaper cars, or slightly older cars, are ways to get there.
@Luncheon23 Жыл бұрын
@@theeverydayengineer1 agreed 💯
@frankspage Жыл бұрын
Well, what happened to lime? It was traditionally used over centuries in Europe, its non toxic, it’s a natural mold inhibitor, cheap, widely available and well, white.
@theeverydayengineer1 Жыл бұрын
It had its time in the "lime light" so to speak, but with the advent of the industrial revolution, lead based paint rose to prominence.
@williamforsyth6667 Жыл бұрын
I used lime to paint walls of our house several times. It is much harder to work with it than with modern white paints.
@theeverydayengineer1 Жыл бұрын
@@williamforsyth6667 I am surprised such a thing could even be purchased this day and age.
@williamforsyth6667 Жыл бұрын
@@theeverydayengineer1 In my 2nd world country (Eastern Europe) it is still used. You can buy lime based, ready to use professional paints from multiple manufacturer. However, when I used lime for painting with my father, I used lime sold for making mortar. (for laying bricks here we use mortar mixed at the building site from sand, lime and cement, so you can buy lime everywhere). That lime needs some preparations before you can paint with it. You also have to cover and pack everything because it is hard to work cleanly with that. Another difficulty was that you could not see how it covered the wall until it dried.
@theeverydayengineer1 Жыл бұрын
I appreciate you telling me that lime "white wash" paint is still available in some parts of the world. I would have thought industrialization would have just about phased out its use except for the most undeveloped countries.
@randalljames1 Жыл бұрын
I have done a bit of destructive testing under compression.. I could see that view port popping out (concussed) by the implosion.. It would be the only time of the entire voyage that the bolts would have mattered.. Certainly not holding the viewport in the hole during the dive lol.. I saw one engineers calculations on the energy expressed when that thing imploaded.. The millisecond that it took equaled the power consumption of NY city for that millisecond (or 2).. I have no idea on that number but if only half right? that is a bunch of energy...
@theeverydayengineer1 Жыл бұрын
That would likely be a rather complex system to model and come up with such a number, but at least we can agree on the fact that once the hull gave way, the immense water pressure accelerated some mass at great speed and would have created a rather significantly pressurized pockets of air.
@randalljames1 Жыл бұрын
so what I could gather.. Implosion at that pressure is around 1500mph. The stored energy released was around 200Mj in one millisecond.. ? does that sound right?
@williamforsyth6667 Жыл бұрын
For me it looks that not just the window, but the clamping ring is also missing. It means, that the pressure pushed out the window in once piece.
@theeverydayengineer1 Жыл бұрын
Yes. I added that near the end in a text blurb. I meant to talk about it when I recorded it and then it slipped my mind. There was a few small bolts to shear off, easily doable.
@williamforsyth6667 Жыл бұрын
Sorry, I did not notice, because I was more listening than watching this video.
@theeverydayengineer1 Жыл бұрын
@@williamforsyth6667 no worries at all. My bad for missing it in the dialogue.
@guitarista675 ай бұрын
In one shot of the recovery vids you can see the bent up clamping ring.