My problem is that it’s so cold in the bathroom. Cold air just pouring in all day and night makes our whole bathroom freezing cold. Is there a fix for that? I can hear the flap also.

What are the dimensions of your loft?

What was the measurement of the screen you took out from corner to corner diagonally? I really need to know. Can’t find the right size.

If you put duct tape down the top and the bottom you don't have to take it all apart

This looks like a good fix at the bathroom fan level. The real culprit however, is the vent damper on your roof. High winds will lift the roof vent damper enough to allow air flow down the vent tube and make your bathroom vent flapper go crazy making noise. If you eliminate the problem at the roof level, you do not need to pad the flapper in your bathroom vent. In your case, you still have the issue of air coming down through the vent tube, but you've added padding to eliminate the noise at the bathroom fan level. That's probably the easiest fix for most. FIxing the problem at the roof level is far more difficult depending on your type of roof. In my case, I would need to hire a roofer to install new roof vents or to apply a workaround. For anyone interested you can either find a better roof vent that won't allow air to easily lift the roof damper OR you can keep your existing roof vent and attach some magnetic strips or glue some washers to the top of the roof vent damper to add enough additional weight so the wind won't lift the roof damper up but still allows the roof damper to open when the bath vent is on. You'll need to be able to communicate with whoever is on the roof so you can test the fan to see that whatever additional weight you applied will still allow the roof damper to open. I'm currently 3 years into a new build with noise from 3 different fans and I'm still deciding which way to fix this. Thanks for your good video as it is certainly an option.

Where did you buy the screen?

They look sweet I want to do the same thing

It looks like a visor for a Pontiac

Dude. I love you, thanks for this it was driving me crazy

Music is driving me nuts 😂😂

Thanks for your help 🎉

Thank you thank you thank you for making this video…I had the exact same problem and this taught me what was wrong and how to fix it myself…thank you!!!!!

Can you post a video how to put the cable back in the slot ?

too slow

You are a great instructor, I used this video to take down and clean 21 year old light vent. Thank you so much.

Going to try ceiling fan blade balance weights stuck to the bottom of the flapper. Peel and stick!

did you put an electric heating element in the smoker?

How about fixing the screen instead of replacing it?

I doubt this guy will fit in that cab! Plus this uncomfortable seats!!

How’s the one wire alternator holding up, did you connect the red to the battery or to starter?

Thank you so much for creating this video. We took our 2016 ford focus to the shop for a tune up. Minutes later, we received a call asking if we had a problem opening the hood. They stated that they tried everything. We came home and stumpled on your video. We watched the video multiple times and then went to work. We were running around happy with amazement!!! When we heard that clicking sound coming from the hood.! Thank you again. 😀

The truth hurts people but a lie hurts worse Ted Nugent is the man!

I love Ted Nugent and yes this is how I feel how today’s country is wtf?! Ya know!

I just changed my jeep’s screen just the way they say it in the video and it worked just perfectly 🤗🤗🤗🤗🤗 I did not disconnect the battery though. Thank you so much.

Nice work ….. good job of showing the process

Where can you buy this genuine product? All of the ones on Amazon and eBay are fake scammers

I sang this to my son every night when he was a baby to get him to sleep.

Great video

I have a 100 Oz. Polar Pop mug, HOW CAN I GET A 640 OZ. EDITION???????????? 🤣🤣🤣🤣🤣🤣🤣🤣❤️❤️❤️❤️❤️❤️❤️❤️

We used to have solo days during choir. On fridays, I sang this song once. I still remember every single line of this song. How?

Truth offends, and shame on those offended.

6:30

4:00

I’m doing the same thing. I used a shop vac and sucked up as much water as I could. I then put a space heater inside the car for 4-5 hours to dry it out.

Just snapped mine !!! Where can i find one ??? 😢

My unit has the exact same issue, I googled the problem and sure enough many people with the exact same unit have the same problem. I didn't have any foam so I used rubber drawer bumpers instead. It's still audible but I can no longer hear it from my desk even with the door open. Also funnily enough presumably my dad already tried weighing it down with a screw when he installed the unit around 15 years ago. Thanks

Thanks you for showing the "how to", it went quite smooth thanks

I cast Life From the Loam on this respectable home. :u

did that glue cause the issue ? was that why the screen delaminated?

Replaced my 2020 jeep compass screen because it went crazy and stopped working, now it says fiat and isnt registering my jeep 😑

I can’t do this myself and I don’t want to go to the dealership, what kind of garage would you recommend I take it to ?

My front cross member hit the ground when I dump the air….so I welded a plate on the bottom of it it to protect the sump also… nice truck mate…

gas

I trust this man to build anything. You see those Newports on the floor of the cabin? He’s gonna make it right

Nice one mate .. I beached our 50 Suburban on a highway after the lines blew out at the front, (fully loaded and towing a caravan). I got home by jacking it up and wedging blocks of wood below the chassis and lower arm. Been racking my brain about bump stops and came across this 👍👍 cheers 👍👍

All is good, But never showed how to put the cable in the new racket !

Just completed this project today! Thank you for this video! We followed along and had zero issues! Took around 45 min start to finish bc the clips were difficult to undo at first. Back up camera works fine! We lived with that devil screen for over a year! Never again! 😂🎉

UPDATE: I DID IT! Thats the first time I have ever done anything like this, i always thought myself to be a bit lacking in technical skills with vehicles and audio systems, but your video helped GREATLY, and helped give a complete newb confidence to do it! One thing Id like to let users in UK and possibly EU all together the radio system is the same HOWEVER the build is different, therefore, ONLY the vents and casing on front will come off when you pry it off, the radio will be screwed into a mount that is actually built into the dash itself, but the only difference is that once you unscrew the hex bolts loose, the radio itself will come out so there will be no need for needlenose plyers as the radio is not attached to the vents and faceplates. Other than that it was exactly as you stated every step, you guys are a huge help and thank you for giving me the confidence to do this myself, saved me almost 1000 off quotes I was given online from Fiat/Jeep dealerships!

Thank you for this video, I will be attempting this myself in a few days, I got the screen and goo gone but I am waiting for the radio pry bar (plastic) to get here as this is going to be my first time ever doing anything like this :) but the video made it look pretty straight forward so thank you!

This is amazing as i am working on my '52 5 window but did you do a frame off and not sandblast the frame and paint it or is this on a different part?