Good job 👌

U have to have the high voltage protected by impact. But yeah some trim would be nice.

pn# skf RA100RR. napa BRG RA100RR. dont get RRB

Why would I need that attachment if I already have a blower

BRO I thought I need new pivots and bearing for my bike. You save me ton of my money and thank you

💯

Very nice. That is one of the best mowers on earth. I have the 2008 promaster 44 xd commercial. I will never sell it. It's a beast. The new gravelys can not stand up to these older models. They were made to eat!!! I have a bearing roaring in one spindle as well. Where did you order your bearings? And how did they hold up. I don't want to switch to the cheap aluminum spindles. The original ones have 1229 hrs on them. I do commercial lawncare and they are just now starting to roar.i would like to change just the bearings. Thanks. Great video.

Thank you for the video. Do you know the size of the washers used and what thickness you made them?

Have had the same model for three years, upgraded the battery , for piece of mind for extended range. Have done roughly 4000 miles and the bike has never missed a beat; no mechanicals whatsoever, not on one charge of course ! Managed to cycle ten miles first, then approximately 9 miles up the Tourmalet in the Pyrenees to an altitude of 5000 feet from single charge and I weigh 100 plus kilos.

Wow thats a pretty handy device

The saw is excellent I have one over a year, very unfortunately the AP500S battery failed very short for professional use with this saw, kind like a Mustang GT with gas tank in the reserve.

Brand of seal drivers and parts number of it. Please 🙏

Currently i'm struggling to get over 200 hours.... using after market stens since gravely switched from cast iron to aluminum. Anyone have a good source for this bearing? I'm seeing them at $40 a piece, buy two bearings for nearly $90 and I'm better off getting another sten spindle assembly. I will say I'm hard on stuff, branches get mulched. Wondering if I have the tension spring to tight....

I need to change the belts and the tensioner springs about every 350hrs or so.

I made it over 900hrs on the spindles.

I think I have same problem. You should have included a clip of the noise while riding for completeness and shown your finished bushings, and exactly how you inserted them. Seeing and hearing is believing.

Idk if i'd use a generator to charge a phone

Very creative good job man :)

Very nice job.

Hahaha. THIS IS CHINA HONDA.

Remember that they are floating on one side not actually attached to the motor just located in the bushing basket

Remember that the frame is designed to torsion and flex I have seen a frame with a sized bush breaking due to high pressure washing it removes all the lub from factory and it rusts with in the bushing-spacer’s there’s two

Hi mate I had the same issue and I approached the problem another way by removing the spacer-floating bush polishing and greasing it and the creaking went away if you remove the play you are in danger of breaking the frame 😢

Can you describe the noise you were experiencing? I have a noise coming from the motor area that is like a "tunk" every 5 to 10 seconds or so. Wonder if yours was the same. thanks

🌸 𝓹𝓻𝓸𝓶𝓸𝓼𝓶

Sorry to tell you but That is A Rover not A Victa

I have this problem too, thank you!

can you tell me the model of the light and if it was difficoult to install it? Cheers!

Hi Do you have speed box?

Hi I have trance e + 2 pro from 2020I have 3100 kilometers and I will be thinking about e new trance for 2022 y :) nice bike :)

just got this bike today 10/ April / 2021 , its just so good its a excellent bike

I have ordered this bike too. Waiting for delivery in tbe uk. 👍

Hi Danial, thank you for the video. Great! I have the exact same bike. :). Have you found a touch-up paint for the rear part around the Maestro system (RED)? I have so many chips in the paint I need to patch it up... Thankful for all advice!

Hey danial! Did you already put the speed box 2?

oh boi yours is in worse shape then mine 2019 after a year dunno why you got so maby rubspots

Hi how many kilometers have you traveled? Do you change the chain or sprockets?

One light on the controler means "automatic mode"

Can you hack this bike? To get rid off speed limit?

Can u give a link for your sit? or the full name of this selle royal sit?

I have giant trance e+2 pro 2019, funn funn :-)

Great review thanks. I'm looking at buying this one can I ask where you bought it from thanks.

Thanks for your video and great to read what others have said

Your bike was’t put together right by the shop you bought it from !

This is Gee up right?

The lowest "boost" mode is automatic mode. Very useful. Should work well. Test it.

It sounds like your shop doesn’t have trained mechanics giant should stop sending them bikes

What model is the light? Can you post a link?

Could this be a assembly issue by the bike shop that assemble the bike . Not fitting the seat correctly, and not tighten things right ?MY 2020 e+3 the fluid line for the brakes does not look as tight as yours .?? I would also say the brake levers and dropper post switch was loose because first thing most people do is adjust the position of the leavers. To me you brake levers look in the wrong position. Personal preference..The light switch button is also for integrated lights that you can order . In the uk its £15 for the wire to wire to the battery ..At 8 minutes the when you are talking about the little light that comes on this is auto mode or power assist . In this mode the motor automatically detects the amount of support the rider needs . Hope this helps

Hi mate nice video. You can connect a light to the battery on the bike and operate it using the light switch on the controller. There is a video on KZbin showing how to do this (from memory there is an internal cable you can access and pull through). Also, make sure you keep the male connector pins clean to prevent random power outs

Thanks for you explication. I'm waiting for my bike a trance vttae e + 2 in two weeks I will look the brake and the seat travel and this problem with the screw. You haveTo go To your giant store To use your warranty. Thanks from france, Daniel m.