1) Turn blue knob to BYPASS 2) Hold bottom bar to enter regeneration mode (arrows🔄) 3) Only wait a few minutes in brine/rinse for pressure to be released 4) 3/4 socket for plug removal 5) Suck old carbon out/don't take too long 6) Will have to empty the shop vac at least once because of water 7) Add new carbon material 8) Get the plug back installed before backwash 2 starts at the end of brine/rinse 9) Once in backwash 2, turn blue knob to SERVICE 10) Wait 3 minutes of backwash 2 then skip all processes to main menu using bottom bar (arrows 🔄)

Can I get the gabbagoo!?

How did you pre measure you carbon out? Are you using volume or weight, and what are those numbers?

A bit of preparation goes a long way.

This video confused me more than i already was lol

Thanks for the narrative. You explained that this is the factory configuration for the pump and switch. I DID IT another's way and the pump continue to run and gravitated the pump I would have to manually pull the power to stop the pump from running all the time. You left out details about what side of the valve [high & low side] I see the screws so that gave me the directions I needed. Thanks again

This guy doesn't know what he is doing 😅

can I add this pump if I already have a permeate pump? I moved the RO system to my basement near to all my filters and added a bigger tank the problem is that my pressure coming out my RO is 15-18 PSI, incoming is 50-60 PSI

This guy is the definition of scatter brained. 🤦‍♂️

horrible explanation... thanks

So we are sucking out the water and carbon while it is in brine/rinse mode, correct? Also, at the end, when you go into backwash for at least 3 minutes, do we have to brine/rinse again or just wait 3 minutes and tap regenerate twice for the home screen?

I Understand Absolutely......Nothing😢

If you bypass the unit then can water flow into the house? We have no water and had left for 2.5 months without realizing we had to have salt loaded into it. It was completely out when we got home and now, no water at all. Thinking by bypassing the unit we can now get water until this problem is attended to by the company?

You seem more confused than I am. Do better. This sucks.

I use calcite with corsex in my unit. Is that recommended? Where can i find bag already pre-mixed? Thanks

I have a newer model and run calcite corsex in it. Is that appropriate to use? Do you know where i could find bags of mixed calcite with corsex? Thanks

Your explanation is as much of a bumbled mess as those hoses!! is this on purpose?

Confusing sorry😢

Current motor of my RO is of 1lpm can we install 2lpm motor.. Will it affect my ro membrane or any other part..?

My water smells like lake water

Confusing

What's a TSO? Why do you keep saying TSO?

A.S.O. - Automatic Shut-Off Valve. Learn your stuff prior posting to public

Very salesy

Awful

What about the top 2 as well?

Where can I find the carbon for this unit??

theres difrent ways of connecting it when i bought my pump i did it per instructions that came with it witch is connect the pump directly to the outcoming feed and into the first stage filter and pressure switch is connected between the tank and and the last carbon filter

How often is this required

What about sanitizing the system? That is part of changing the filters and a little hazy for me on where to put the sanitizer to run it through the system.

What size is the carbon media?

Camera man what is up with the sounds your making, annoying as shit. Get some sleep buddy... at least away from the mic..

Where do you purchase the Carbon?