Scott “AngryDuck4x4” Riley

Пікірлер

@walterdebose2507 29 күн бұрын

UNFREAKINGBELIEVABLE!

@jonathan2755 29 күн бұрын

😂😂😂 its getting towed

@jacobg5122 27 күн бұрын

@@jonathan2755 Where do you see a tow line? I think you're seeing the whip on the front fender and thinking it's a winch cable.

@jonathan2755 27 күн бұрын

@@jacobg5122 boats and tows Boats and tows gotta get me some boats and tows.

@nvrenuf_k5933 Ай бұрын

42’s?

@scottriley4006 Ай бұрын

Yep.

@jamesaustin4044 2 ай бұрын

Wiring job for the lights is suspect

@scottriley4006 Ай бұрын

On these trucks the turn signals and brakes are on the same wire to the taillights. I like having the amber for turn signals, so I just have to live with them also being brake lights. Although I do think there is a device available that can split them out, but I haven't been motivated to look into that much further.

@GodBlessedAmerica 4 ай бұрын

Pulley looks ok. It’s the bearing that has too much play. 😂

@scottriley4006 4 ай бұрын

True, true

@bennyboyy7 4 ай бұрын

Theyre so cheap just try adding some washers or modifying it till its quiet

@scottriley4006 4 ай бұрын

I went ahead and just threw the compressor in there.

@jermalramsey1567 6 ай бұрын

What oil dipstick are you using

@scottriley4006 6 ай бұрын

The tube is NAL-12551154 The dipstick is NAL-12551144

@jermalramsey1567 6 ай бұрын

@@scottriley4006 thanks

@matthewmusgrave616 7 ай бұрын

What is you opinion on this motor?

@scottriley4006 7 ай бұрын

I had to have the first engine replaced under warranty after about 4,000 miles. They took care of it without much hassle and the second engine has been going for over 22.000 miles daily driving and is doing good. I'm satisfied with the purchase.

@Тоир-е3э Жыл бұрын

Мая мечта❤

@grndiesel Жыл бұрын

I'm not seeing much twist on that frame. Do you have any details on mods, or boxed portions that were added?

@scottriley4006 Жыл бұрын

It's all stock frame. The bed area is all tied to the frame in several places so that helps. The 1 ton frame is also a little sturdier than the 1/2 and 3/4 trucks.

@grndiesel Жыл бұрын

@@scottriley4006 Cool, so I guess the steel box is acting like a torque stiffener. Gives me some ideas.

@SchizoGamingChannel Жыл бұрын

🤨

@kekfuck Жыл бұрын

fuel injection.

@SchizoGamingChannel Жыл бұрын

@@kekfuck yeah. That’s a lot of gas

@scottriley4006 Жыл бұрын

It's headed back to Holley for an ECU replacement.

@BrandonWillis-kf5zm Жыл бұрын

I kept seeing that the connectors to the injectors are of poor design and sometimes needed to be crimped tightly as they are prone to loosen up on you

@scottriley4006 Жыл бұрын

We tightened the connector but the injector was still just dumping fuel. We're thinking it has stuck open. Gonna try swapping the 2 injectors on that side to see if the problem follows the injector.

@jondahl3173 Жыл бұрын

Nobody wheels with chains?

@scottriley4006 Жыл бұрын

We do sometimes, but so far we've had kinda had bad luck with them. Last time we broke an axle shaft ujoint.

@gaetand7310 Жыл бұрын

Good where is?

@garionporter5961 Жыл бұрын

Is the main reason they keep "stalling" from plowing with the dif (low)? and front end linkage? Why not have a skid plate or something?

@mountainadventures7346 Жыл бұрын

Florida snow wheelin👍

@JohnDoe-ud2cc Жыл бұрын

You have bead locks, air down more 6psi

@scottriley4006 Жыл бұрын

Actually those are fake. I usually air down to 10 to 12 in the snow.

@JohnDoe-ud2cc Жыл бұрын

@@scottriley4006 I would go 6-8.

@jamazonnewyork3221 Жыл бұрын

i hear u joints !

@scottriley4006 Жыл бұрын

Yeah, found this a few weeks later. kzbin.info/www/bejne/bWTVd5J4hc-BgrM

@joshusername22 2 жыл бұрын

You guys do some fun stuff!

@myLPboys 2 жыл бұрын

Been watching too much Vise Grip Garage! Lol

@drkaymotorsports 2 жыл бұрын

my old stomping grounds. I have done that trail in my jimmy several times. You ever on the western slope again let me know and I will wheel with you.

@joshusername22 2 жыл бұрын

The difference in how you wheel when you care about the body and when you don't! lol

@lyzadavis543 2 жыл бұрын

Love wheeling the big drifts in mad creek also

@nvrenuf_k5933 2 жыл бұрын

A neutral drop test will determine if it needs to be repaired.

@B450R 2 жыл бұрын

Damn, that was the year I broke down trying to get there. I missed this. Thanks Scott for it all and hope to see you out there this year.

@joshusername22 2 жыл бұрын

fun!

@nvrenuf_k5933 2 жыл бұрын

Looks like so much fun! Are the Blazer and buggy on CK5?

@fernandoh.2609 2 жыл бұрын

Hey did you figure it out ? I have the same issue in my 85 regal it only makes the noise in park.

@victoruruena7920 3 жыл бұрын

Did you ever find out what the issue was ? I have the same issue

@Fuel28 3 жыл бұрын

How was the dirt road out?

@Colorado4x4 3 жыл бұрын

Very nice! Slippery when wet!

@yerwrng 4 жыл бұрын

Spotted the winching down at first I thought you had kungfu brakes. I came down and forgot to let my brakes go which made for a vertical wheel stand.

4 жыл бұрын

Great stuff :) Would you like to be KZbin friends? :]

@scottwest5013 5 жыл бұрын

Nice K5 sir.

@Tyadamski1 6 жыл бұрын

Scott what intake manifold do you have on there?

@yerwrng 8 жыл бұрын

This thingy looks famliar...is it from Bailey ?

@stevekay8926 7 жыл бұрын

No, it's mine. I did live in Castle Rock and grew up on Parker, but just moved to Idaho a few weeks ago

@yerwrng 9 жыл бұрын

I see a clever pile of rocks starting to stack themselves at the base of the obstacle...if you can't make the line without stacking the rocks go to the right until you find an easier line you can . when you stack rocks you are not really beating the harder line you are enginerring the challenge out of the line making it easier thus no different than failing and having moved to an easier line ...I BOO THEEEE ROCK STACK"N BITCHES .

Ең жақсы KZbin

Пікірлер