Thank you for the comment

Yes. Use only 99% isopropyl alcohol free of water or thinner.

@@diysandhacksforyou2924 Ok thx

@@diysandhacksforyou2924 the only rubbing alcohol that the store sells is 70% isopropyl alcohol and also has water so what should i do

Probably the battery is dead.

Just change the battery with a New one, or do what i did in the video.

@@diysandhacksforyou2924 I'll do that, thanks!!!

I brought a new battery and the light says it's charging but it's not and my psp said the powersource was external idk what to do now, thanks for the help though.

@@Nighttt0228 Try doing the battery Mod i did. Because, psp batteries tend to die with time. If it didn't work know that there is an issue with the charging circuit inside your psp.

Just serch for the kernel or custom firmware of the type of your r4 on Google. Extract it to the root of your sd card. Then put nds games on nds folder. And you are good to go, it is that simple.

Always scan the file you download by using total virus on Google.

Honestly it is way easier to buy a dsi and mod that.

I used thinner for paint to disolve the glue that is holding the plastique together.

It's a 2000 model. Battry dimensions are 3 cm by 4,6 cm.

Any electronics stores have this sets. Or you can buy them on the net.

Yes the battery is bad. I throw it in the garbadge. But this one i used worked for me. The important thing is the pcb.

Throwing in the garbage is the irresponsible thing you can do with a LiPo battery .-.

By using a little bit of paint thinner where the plastique is joined together. Then open it carefull with a thin knife.

Thanks Bro ! Yes you need to solder it because terminals are spot welded to the battery then soldered to the pcb.

@@diysandhacksforyou2924 hmm it looks complicated and scary if i do the solder, but thank you for the information i will buy a GBA cartridge without a battery like the Megaman battle network

It only needs some soldering skills nothing fancy. Although, there is special batteries for cartridges sold on the internet.

@@diysandhacksforyou2924 ok no problem, i don't need to change the battery but if i want to play Gameboy or Gameboy color, i will play some games that can be played without saving or using a password only

Some people clip the leads and just "tape in" a regular battery without tabs. I wouldn't recommend it, but if you really don't want to solder then it's an option.

Yes old mobiles batteries Will do the job. Just be carefull not to puncture the puffed battery when opening it and respect polarity when soldering New battery. If you found à battery semilar in capacity to the original it would be great if not anything above 1000 miliampere is OK.

With a knife. But be carefull not to puncture the battery.

No. But you have to make sure to solder into thé right polarity.

Try to turn it on while the charger is inserted in charging Jack.

No, it's just the physical battery size that makes them different. For example, you can hack a 2000/3000 battery to fit in a 1000, though it's gonna be a bit rattly. Same goes the other way around except you won't be able to pop the cover on the 1000 battery on a 2000/3000 due to the thickness.

Yes it works but it has only 1000 miliamps, it can get you 3 hors of play. You can put a battry with bigger capacity for more play hours.

thanks bro 👍

Thanks bro

شكرا اخي العزيز.

@@diysandhacksforyou2924 هذا واجب وفقك الله أخي

شكرا اخي العزيزعلى التشجيع.

@@diysandhacksforyou2924 بالتوفيق ان شاء الله

Thank you very much my friend. Consider to subscribe there will be more ideas and repairs in the future.

@@diysandhacksforyou2924 wish you more success dont give up

@@creativelife4453 thanks. I appreciate it!

thanks my friend

thank you my friend

merci 👍

thanks

شكرا

thanks bro

thanks