Пікірлер
@k1dmaverick59
@k1dmaverick59 Жыл бұрын
So in what ways does this tire help.
@mickaelb.5552
@mickaelb.5552 Жыл бұрын
dear friends, could you give me what spars did raymond used for rear upper arm? thanks in advance.
@chrisandnicolepurcell683
@chrisandnicolepurcell683 Жыл бұрын
are you still drifting? what type of a diff set up do you use? thanks for videos.
@jasonmcintosh5285
@jasonmcintosh5285 2 жыл бұрын
The extra gear. I flipped my tranny and had to the same or it was faster in reverse then forwards did you figure that out could not get the out come to change
@jasonmcintosh5285
@jasonmcintosh5285 2 жыл бұрын
Need help
@jasonmcintosh5285
@jasonmcintosh5285 2 жыл бұрын
Yo I've got the yd-2r and I flipped the tranny and the motor is going faster in reverse the it is going forward.... is the gear the only way to fix it?
@Batucada408
@Batucada408 2 жыл бұрын
I gotta get myself down to super g some day. Just have to figure out electronics installation, wiring, paint a couple bodies...
@tylerseabook9423
@tylerseabook9423 2 жыл бұрын
To run the motor on the back like that do you just flip the diff? I want mine like that
@strapped_6159
@strapped_6159 2 жыл бұрын
I know this is a older video, but what was the purpose of the clear film before the pice you drilled on the shaft. Wouldnt that stop the flow of fluid? Just curious
@cadetkonki2687
@cadetkonki2687 Жыл бұрын
It does add much resistance when the damper is coming back up, but it bends out of the way when the damper is compressed so oil can flow theough. Its a very effective way of simulating rear rebound damping to get the rear end to squat and stay squatted to achieve high grip under throttle.
@cadetkonki2687
@cadetkonki2687 2 жыл бұрын
I know its been a minute and will forever to be, but I am struggling to much and frequently refer here for answers. I have a heavily rear biased chassis on anti-torque setup, squared-out wheel geometry in the rear, big bores w/ drilled holes all around with light oil, and damper ball extensions all around and still cannot achieve anywhere near this kind of movement. I know things are kind of different now but I know youre knowledgable, I was wondering if I could get even a small tid bit of just basic info. Hope you are doing well Raymond
@cultureisnotyourfriend3458
@cultureisnotyourfriend3458 2 жыл бұрын
Awesome 👌 I wish I could drive like that! I fallow you on Instagram as well. Love your paint jobs. I've got an SXii and I need a suspension setup guy like you on the team, that I don't have by the way. Is your home track in the Los Angeles area? Love the video.
@tim1080
@tim1080 2 жыл бұрын
We need more videos… where are you?
@idk-mi2nv
@idk-mi2nv 2 жыл бұрын
sick, but how did you get that flame or LED exhaust?
@danielexiovus4860
@danielexiovus4860 2 жыл бұрын
just found this vid, Im into rc drifting and setting up my rmx 2.0 been doing it for about 8 months now, and love the hobby.. what is it that enables the car to be able to do reverse entries? Im assuming its a mixture of a perfect suspension setup with a rear active toe kit and a bull shit amount of boost?
@AllThingsGundam
@AllThingsGundam 2 жыл бұрын
I love the General Lee Sick job
@logantic
@logantic 3 жыл бұрын
was great driving to me sheesh
@jayroverduzco2291
@jayroverduzco2291 3 жыл бұрын
Also noticed you switch from the dx1T to the dx1r motor, which one was better
@jayroverduzco2291
@jayroverduzco2291 3 жыл бұрын
How was the Sp-03d servo, I noticed on your Instagram you switched over to a rev-d steering servo
@omarpatino5936
@omarpatino5936 3 жыл бұрын
What part # is the longer shock shaft from RC art? Thanks!
@countrymusic510
@countrymusic510 3 жыл бұрын
Can you do a quick videos on details of the trans flip, can’t find any info of anybody else doing it online and I’d like to no more.
@Bukemaru
@Bukemaru 3 жыл бұрын
I love the way you slide this beast!! Is there anything special you do to your setup to help you drive more aggressively?
@Time.2.Repent
@Time.2.Repent 3 жыл бұрын
When can I get one?? 😏
@Time.2.Repent
@Time.2.Repent 3 жыл бұрын
1k let's go!! Can we get a new vid!?!!!
@sixline6663
@sixline6663 3 жыл бұрын
Siccck
@qw087783871
@qw087783871 3 жыл бұрын
1000~~~
@yifan5826
@yifan5826 3 жыл бұрын
Hi , do you have tuning service ?I would love to send you my yokomo for tuning for fee.
@yifan5826
@yifan5826 3 жыл бұрын
Hi , do you have tuning service ?I would love to send you my yokomo for tuning for fee.
@jpmgames5585
@jpmgames5585 3 жыл бұрын
Where can I get great 1/10 scale rtr drift rc cars?
@hemiboyrcbmxerwilliams7599
@hemiboyrcbmxerwilliams7599 3 жыл бұрын
Thank you. I am currently setting up my SX2 the same way
@tylermoore9365
@tylermoore9365 3 жыл бұрын
these videos would be so much better if he didn't play shitty music and could actually learn how to film clips
@shindunata
@shindunata 3 жыл бұрын
what part did you use for front body post
@ummcantthinkofone
@ummcantthinkofone 3 жыл бұрын
Thats a brilliant idea to use tye tyre mounting jig as shock holder. Have you ever tried putting the shock shaft in the shock body and then add the o ring? Less chance of damaging the o ring from the threads of the shock shaft as the o ring is not compressed at all.
@tinyiswashed
@tinyiswashed 3 жыл бұрын
love the tandoms and i hope you get to 1k suds have a good day
@andrechannel5994
@andrechannel5994 3 жыл бұрын
Toe out ? Front
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
Yup always toe out and usually about 3-5 degrees
@andrechannel5994
@andrechannel5994 3 жыл бұрын
@@DakineDrifter808 good , thanks bro . 👍👍👍
@delazerdamotorsports
@delazerdamotorsports 3 жыл бұрын
What is the front toe? Thank for all the info
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
Toe out usually about 2-3 degrees out
@BadWallaby
@BadWallaby 3 жыл бұрын
Timmy Woo is the man! IS there video of you two in that tandem comp?
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
I believe there is videos of it on my instagram @raymond_saiko
@zenkiftw2969
@zenkiftw2969 3 жыл бұрын
What springs are you using?
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
In this video I was using stock springs but I normally run Reve'D springs
@zenkiftw2969
@zenkiftw2969 3 жыл бұрын
@@DakineDrifter808 ok thanks. I recently got reve’d springs and the car feels amazing. What springs would you recommend for the rear and front? Currently running yellow rear and blue front.
@cherroxrcnorway4708
@cherroxrcnorway4708 3 жыл бұрын
This is so inspiring! Bought my first rc drift car a few days ago, and I'm hooked! Progressing day by day!
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
Glad I can inspire you!!
@Shantofficiel
@Shantofficiel 3 жыл бұрын
I love it, gained a sub!
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
I appreciate it! Thankyou!
@kennethryansanandres9547
@kennethryansanandres9547 3 жыл бұрын
How much i need to buy like this one?
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
I would say around $1k would get you a good setup
@RoninDriftRc
@RoninDriftRc 3 жыл бұрын
Siiiiiiiick backies
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
Thankyou!!
@petervisser8130
@petervisser8130 3 жыл бұрын
Dude the video is very nice,but please those fingernails..horror..😷😖
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
Sorry, cars are very dirty lol
@chinomedia7454
@chinomedia7454 3 жыл бұрын
Did you only have the topline pistons in the rear or all around
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
I only ran them in the rear
@garyreyes2374
@garyreyes2374 4 жыл бұрын
I have an SX3, what is it about your set up that makes the car squat so hard under acceleration? My front end does not jump like yours
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
One thing for sure is how soft I make my suspension and how it's set up. I also run an active toe kit and a good amount of boost on my esc setting
@squarebiz1478
@squarebiz1478 4 жыл бұрын
What's your opinion on usukani drift chassis? And do you think yokomo is the best way into rc drifting
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
Sorry for the late reply. I personally have never used usukani before so I can't say for sure but it's probably not the easiest to get drifting good. Also Yokomo is the best in variety of aftermarket parts but Sakura D5 would be the cheapest but still good way into rc drifting. I would recommend getting good electronics with it
@house530
@house530 3 жыл бұрын
@@DakineDrifter808 in your opinion what would be good electronics? I’m looking at getting myself the D5
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
For servo and esc i like to make sure they're at least tuneable
@RoninDriftRc
@RoninDriftRc 4 жыл бұрын
RAAAYMONNND
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
Whats up!
@RoninDriftRc
@RoninDriftRc 3 жыл бұрын
@@DakineDrifter808 hahaha 🙌🙌
@THROWEDDRIFT
@THROWEDDRIFT 4 жыл бұрын
Can yo do a vid on ur active rear toe plz
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
Sorry for the late reply. Yes I will try get that done asap!
@THROWEDDRIFT
@THROWEDDRIFT 3 жыл бұрын
@@DakineDrifter808 thanks
@timevans3735
@timevans3735 4 жыл бұрын
What backfire kit are you using
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
Sorry for the late reply. I used a regular lighting kit that had different flash modes on it. Sorry I dont remember the brand
@hugobesson6407
@hugobesson6407 4 жыл бұрын
Why do you put all the weight on the rear. Does it help to make the car rebound when you accelerate ? I have a yd2 sx3 but she is not reacting like your chassie. Thanks for your awsome content. If you want to watch my sx3 : kzbin.info/www/bejne/omHVkKSHarJnrJY
@DakineDrifter808
@DakineDrifter808 3 жыл бұрын
Sorry for the late reply. I put my weight in the rear to help add traction to the rear wheels. And also put it higher up so the side bite is much better
@frenchouillard
@frenchouillard 4 жыл бұрын
Team drift pigeons???😁
@DakineDrifter808
@DakineDrifter808 4 жыл бұрын
yeah its an interesting name for sure