I wish this was translated to English so that I could understand it.

You made a mistake at the assembly. 😂 4:19 this should be between the outside and horizontal bar. But who cares 😂😂😂 its been 5 years or so

hi where can I buy Samsung LED strips like yours? or even longer to cover a 5x5 area? Thank you

Where do I purchase all the parts? I'm in the u s a.

need the rgb version mate. me bairns will love it

whoa - that music just took me away .... Nice !

Very nice!! Mark your 25, 50,75 and 100 percent on the pot for seed, veg, flower and finish.

You made it a more complicated than it could be. Put the channels facing down into the inside of the angle. Much easier. But good for showing us.

I would bolt those LED strips down, the double sided tape could lose its sticking power, and then your LED array turns into a fire hazard. Also I would get the cheapest thermal paste, and use that to connect the LED strips to the aluminum frame thermally. For the fixation of the LED strips i would use small nuts and bolts. Preferably nuts with the silicone in them so they wont come loose. Further, I like your build style. Greetings, Jeff

Do you have issue with Algae on the clear tray?

Love it mines come today

Total cost?

Man youre gifted!

your good at growing in water, do you wait till all the water is gone before you refill them or some other amount cheers

How many pallets did u use as I found larg3 ones heat treated 3 quid a pallet wanted to get a quick price figure

Euphoria

I am forced to do this after losing everything this year due to 85f temps for the solution/water in the Kratky, and the DWC method. Root rot got me, but with this the roots don't sit in the water/solution. My only fear is that the pathogen that is root rot comes with plant matter which the bottom container will have even with 100% healthy roots. If the pathogen is in that bottom container it will end up on the roots 100% sure negating any positive with this system.

master!! greetings from Chile!!

How long did this last?

Great work, Sir. Aren't you worried for the parallel wiring? I ll do sth similar, but drivers are so expensive and I postpone it all the time... Hahba

Very good video, well made, my Friend :)

Plus don't burn pallets as they are toxic to humans. They are inpregnated with Bromide 🤢

Those pallets are good. hardly any gaps in the top side. all I keep finding is pallets that have 80 to 100mm gap between slats

I had the same problem with the heat when I built my own heatsink. Found that additional smaller u channel aluminum strips heat taped to the back of the u channel helped some. I still can’t turn the light all the way up or I’ll cook the led. So I just use it fir veg. I’m also pushing 3500ma strips

Great job on the build Quick question on electrics if I wanted to run 7 strips what driver would you advise . If you explain the maths in short I’d appreciate it . Thanks

That's one of the best one I've seen but in new England I'd have to put more 2×4s for the roof snow is heavy

Need 2 of these over a 4 x 4, cost over 500

I thought you would show us the PPFD 😢

What brand tunnel is it

Where did you buy the light modules?

I watched another channel a while back and the guy suggested using a sponge over the microphone to cut out wind sounds.

Thanks for the video. I can't believe that some grow lights cost 500 or even thousands of €.. So much money for something you can do on your own. For that money you can buy washing and drying machines, refrigerators and freezers, TV's, computers and laptops, cellphones, used cars.. So much more could be added to that list.. And none of those things can usually be made at home.. I'm tired of this market, everything made for growing is triple the price.. It's just a light ffs! What's even worse, you buy a cheap grow light like Mars Hydro and it stops working within few months of use, so you have to spend more if you want a reliable light...

Hi good video, what is the brand of poly tunnel You have used? Thanks

Several years on…what was it like? I just followed your videos and mines been fermenting for a month.

Nice build and very informative. Thank you!

👍👍👍,,,.

Can you make an updated video as I want to see the performance gain with the improvements to update 5 with your system

Love the shed, and the music is on point

Do you have a overclock on your palit 3070 mine only boosts to 1920-1935mhz core

So where is it now?.

What is better lighting for plant, Warm White or Daylight or Full spectrum?

280W? 3x3

AWESOME :)

Hi. First of all great build and definitely something I will try to replicate. But ... I have a question about something that's not my forte ... electricity. You got 5 strips and when I looked them up they are 1.1A and 46V or around 51W. How can this 320W driver go to the max when in theory you should be around 255W (51x5)? I know it's a dumb question since it's working perfectly but please can you explain what I'm missing? Thank you

Great content this but I have a question about the led strip, can I combining this with other led strips. But my biggest question is where you can buy this samsung strips.

U should do a pppfd test.. looking proper

Great stuff, men, yo are the boss😎did you calculate ppfd, par and other stuff, so its efficient enough?!just wondering what is the best method- thenk you so much, you hands are gold👍

Wow, well done sir, this is perhaps the best DIY grow light build I've seen yet!! I'm not that savvy on electrical stuff but I'd shonuff give this a try, thank ya for sharing your build!! Ya have a new subscriber from east central Mississippi here, have a good un!! Dan

I think it´s amazing that people are starting to build these DIY lights at home. I noticed that the cost of build is not much cheaper then buying ready lights, and still DIY lights have great benefits. Even the fun of building your own is priceless, and if something break you can always repair them.

Will this flower a 3x3 space or 4x4 mate? How many total watts does it draw from the wall? Cheers