How much does a 1.5” x 6’ T post weigh ?

Super helpful...thanks!!!

nicely done

Is an O'Brian post and a Timeless post the same product?

Does the end of the post/pole act as an additional ground ? I set up an electric fence and it does not shock unless I touch 5he ground wire and the output wire or the output wire and my metal post. I was thinking of wrapping the end of my wire around some rebar, but want sure if that was safe or would act as an additional ground .

I have been using floating diagonal braces using treated wood posts for 40 years. I learned that a longer (10') diagonal brace rail needs to be used and positioned on the end post at 1/2 the height of the top wire. Having too short of a brace rail tends to jack the end posts up out of the ground when under tension and is even worse with frost action.

Does anyone know how the Timeless fence posts last compared to fiberglass posts? Which is best for standing up to the sun and weed trimmers? I would think that PVC would degrade in the sun faster than the fiberglass but I don't know if the coating on the Timeless posts hold up as well as fiberglass.

How long are those fence posts? Anyone know? They look taller than the buck’s antlers. Are these Florida deer? If those posts are 4 feet above ground those are tiny deer.

Looks like the gate is opened. Lol. That is kind of the way I do things also.

Boa noite qual valor?

The fence is NOT to stop deer! The fence is to keep cattle or sheep IN. The beauty of Timeless Fence is that it springs right back after getting hit. Whether by a deer or a falling tree. a steel post fence would be bent to hell after getting struck by several hundred pounds of deer.

i guess the fence isn't useful to stop deer

HOw does that work for electric? Wouldn't that be a big suck on the electric?

Those post are great!! But why so close??

Thanks. That helped, a lot.

This is so enlightening

Thanks

With the spring gate, how do you use it for passing through as a person? Do you just take them all off one by one and lay them on the ground, and then, after you pass through, you hook them back up?

So, the booger man, can just stick it in his pocket from the magnetic base…

Is there not friction on the wire where those h posts are located? Like at the bottom of the hill?

Also on Amazon

So cool❤❤❤😊😊😊😊🎉🎉🎉🎉🎉🎉🎉

You didn't need braces at the ends and you are using all H-posts, what kind of fence is this?

In your dips, we have used elec flood gate controller, on 3rd wire down ,and hung dog chain droppers to water line, spaced out with short lengths of 15mm, water pipe [plastic], when, creek floods, cuts out, and no wires to catch, rubbish etc, washing down creek, simple and easy, been doing this in New zealand, since Gallagher, made these controllers

Looks like it will work with cattle, but I doubt anything less 48" is not likely to work with full sized goats. It does not show with multiple strands which is where you will have problems. I think I am going to use the timeless system for keeping my goats in, but I don't think I will use it to replace my net temporary fencing.

those open tap crimps are terrible, they add so much resistance to the line. I replaced all mine with SS split bolts

Do you sell them, or do you have a link to that pair

Awesome tips

Is that electric or high tensile wire. Electric would of stopped them right. They would get deterred the minute the nose goes on the wire right ?

These videos are great! Thanks for putting them out there for us fencing rookies. Getting ready to fence 60 acres with timeless as my line posts. 👍🏻👍🏻

Good stuff! I like my timeless posts.

Great info. Thanks.

Good explanation. Knew there was a trick to stop the wire from getting tangled on the bottom when I stop. Thanks. The only video explaining this I could fined.

Can any size T-Post be ordered with the slits cut in? Does it cost more to purchase post with slits?

A tip: On your diagonal brace, find the holes that you will be pulling your wire through and drill them level. This will help keep the wire from dragging as you pull.

That makes corner posts so easy!

I love timeless fence. I have several of the standard white posts. I wish I had the budget right now to put in all new fence. Good product.

Boa noite qual o valor?

Is your vertical post driven? Or dug with a post hole diggers then concreted

Ok that sounds good thank you

Great info! Will be utilizing Timeless for my operation.

There is no brace at that corner where the gate is

Are the h posts able to be driven with a hand t post pounder also?

Nice video! What are the specs on the wire you’re using?

Super helpful video

Can I pull 12.5 ga.wire through Johnny balls on existing wood corners? If so how many tension devices would I need?

Can you use the gripple on both post in the corner? I like the clean look of the post without the wire wrap. This will be my first fence build so any tips appreciated

how did you terminate the wire running through the paddock division, looks like you just put a gripple on the end and pulled that against the post