The "Gun Tool Amp" Multi-tool Carry Kit by "Real Avid"? Looks like it's $70 for any one else curious what it was.

Cool story bro

I believe it’s only valid for 1 year

Adding most suppressors (the exception being flow through style) without increasing buffer weight is going to lead to an increase in felt recoil and a highly accelerated rate of wear on the inner components of your rifle. For example on my Daniel Defense mk18 (10.3 inch barrel, carbine length gas system) will shoot great unsuppressed using a standard spring and H2 buffer, but running a suppressor I can still use the H2 but it is much nicer with an H3. Keep in mind that the type of ammo you are choosing to use is going to have an effect as well, full power 62 grain 556 creates a lot more back pressure than the less expensive steel cased 223 will. It may be worth browsing some forums and finding people using the same barrel length and gas system and see what they have success with.

Something that was missed from this video is that image of the ejection angle graph. A short stroking gun (not enough BCG speed) jams. An extremely fast moving BCG can also jam, but primarily is a negative because it creates more felt recoil and wears your parts down faster. A properly functioning AR15 will ideally eject brass at 4:00 - directly to your right and slightly behind you. If you took that rifle and put a can on it, it would likely eject brass at a 2:00 angle for example. This is the result of a fast moving BCG. This is when you’d take these springs (given you don’t have an adjustable gas setting of some kind) and use it slow down the BCG at the buffer.

Also as for your last question, you could use both a spring and buffer, or just either or. Sprinco actually recommends a heavier spring and lighter buffer combo but your mileage may vary.

No particular reason we did not showcase the caliber. .308 is a tried-and-trued caliber that has had its time in the spot light for many hunters. We always recommend a .308 for its precision, accuracy, and ammo type variations. However, new calibers are coming to the market with great ballistic technology that shooters of all types can benefit from!

@@missionridgerangeacademy2624 For hog hunting, the 55g Federal .223 Barnes TSX rounds SLAP! One and done for a big boar hog is all you need! 💪🏻

Both

Try the SpringCo Blue spring

@@stephen_crumley turns out I had some burrs on my feed ramps, works fine now. I did get a Sprinco Red Spring, going to use it with my Odon Works Adjustable Heavy Buffer to fine tune the cyclic rate on my extremely overgassed 10.5" psa with the WOT

@@rickymedina7563 Make sure you break the gun in with at least 200 rounds. Mine wouldn't cycle steel until I made it to 150 rounds, or so.

I was thinking bouta getting the h2 buffer for psa 10.5 556 you think I should get another spring as well? Or think the h2 with stock spring would do?

I added a red dot, tac light with pressure switch, and 5mw green laser.

Yes you can.