So the problem I’m having is the same thing, but Instagram will only allow for 90 seconds of music regardless of reel or post. It’s retarded
@the.kingant2 ай бұрын
Noice
@rafaelredczusvanberkel53973 ай бұрын
Yess, it works. Thank you so much for this 'hack'!
@johnalbu23193 ай бұрын
What did I forget to do? The print head SLAMS to the left and screen says something about a power error 000031
@anterich37524 ай бұрын
Thank you. A view times I overtook you in a step and in my mind said to you: "Come on, you can do it!"
@silvonayrwd4 ай бұрын
Thanks so much!! I love the video you got through it with 1 hand. Awesome!!
@theeculturedswines4 ай бұрын
damn this was very long winded
@habanero63324 ай бұрын
Printer fixed. Thank you.
@mking03105 ай бұрын
Your video is awesome, i love the candid remarks, esp about your bf. Have you ever had the carriage slam on the left side of printer when powering on? I found a video about cleaning the clear tape/ribbon and its clean. I dont know if cleaning the head causes this?
@bruhscousin97885 ай бұрын
Does it still put it in the reels algorithm and feed?
@amirmashhadi9655 ай бұрын
Hello, I'm currently facing an issue and I'm hoping you can provide some advice. I'm working with metallic vinyl (gold), and I'm adding a white ink background to the artwork. However, I want to have text show through in the gold vinyl material. When I set the text color to standard white and the background to grey-white (RDG white) in Illustrator, VersaWorks doesn't render the text properly; it just shows the entire thing in white. However, if I have a black or any other colored background and leave the text in standard white, it shows up in gold. This issue only occurs when I'm printing with a white ink background. I hope this explanation clarifies my problem. Apologies for any confusion. any advice or tips is appreciated.
@CarlaTofano6 ай бұрын
Thank you!
@donnachiappa32686 ай бұрын
What platform do you use to create your longer videos?
@EverGreenCloth6 ай бұрын
Thanks for the tip :)
@ruthtay98196 ай бұрын
Did you soak the whole print head in hot water? Or did you just run hot water over the nozzles under the water so it wouldnt get into the connectors
@QuentinKarmark6 ай бұрын
Hello, I am interested in acquiring the VersaUV 300D: are you happy with choosing the extra size capability? Do you use it enough to make it worthwhile? Just basically wondered how often do you get requests for oversized printed items?
@victoriagordon40717 ай бұрын
Thanks for the tip
@primetimepdx9 ай бұрын
These instructions are great. Thank you!
@randigirl2510 ай бұрын
OMG!!!!!!! YOU ARE AMAZING!!! My Epson WF7210 was working perfectly last night, this morning I get the dreaded error 031004...nothing worked. I actually thought it was dead..went and bought a new one but when I got home I found this video and thought what the hell..its dead anyway. I turned it off, did everything you said to do and put it back together and OMG ITS WORKING!!!!!!!!! Thank you SO MUCH!!!!! You are a life saver!!!!
@WannaBeMuzkant10 ай бұрын
I'm interested in how you prepare the lighters for printing..... some have a strange plastic that the UV print doesn't stick and a primer is needed... but which primer... officially there is no case for plastic PRIMERS in UV printing....I'm looking over the internet for that kind of primer :)
@dhobdubious738310 ай бұрын
thanks for the tutorial.
@patriciaescobar2157 Жыл бұрын
hola saludos desde Colombia , mi impresora imprime bien el test pero, imprime doble las letras y las lineas no son rectas
@sassykins13 Жыл бұрын
Thanks girlie I have a wf 7820 that just won't clear the black, so I'm gonna try this. Lort help me or I'm gonna throw this expensive printer to the wall. Lol
@randallgoetz9823 Жыл бұрын
Really helpful. Thank you.
@moomoo1015 Жыл бұрын
Where are you able to buy a printed head replacement? I am unable to find them online.
@chrisamos5075 Жыл бұрын
Thanks! Just what I needed! :)
@kmoore5150 Жыл бұрын
Thank you. I will give it a try - try to clean first, then replace if cleaning doesn't work. I can't seem to unclog the yellow head. I see that you use some of the same technical exclamations that I use when I am working on things ;-)
@rf-tz6vd Жыл бұрын
Wear Gloves!! Great Video!!
@christianh105 Жыл бұрын
Thanks for the tutorial. Is there a way to control the opacity of the white channel? In other words a way in which I could control the density of the white that gets printed form within the file itself?
@clearcutmethod Жыл бұрын
I think if you lower the opacity with the fill control that MAY work.
@augszillary Жыл бұрын
My boyfriend jumping meee😂
@user-uw9ei8ck2e Жыл бұрын
Thank you! Great information :)
@Ari_gatcha_gamergirl Жыл бұрын
Do I need to do this if it prints blank
@furqanziajutt8014 Жыл бұрын
liking the video and subscribing the channel not because it helped me what I was looking for, but because I like your voice ❤
@natashahill6156 Жыл бұрын
Are you available for questions. I can’t find anyone who has converted their printer that might be able to give me some insight to my problem..
@Michelle-tx3mg Жыл бұрын
I tried everything, did this and now it will not print only blank pages when I print but will print purge pages but nothing I print... any suggestions 🤦🏾♀️
@heatheronnen1585 Жыл бұрын
So, I took out my printhead exactly the way you showed, but a little square sensor came off somewhere and I have no clue where from. Any suggestions?
@peterruscoe7413 Жыл бұрын
Very descriptive. Unfortunately it does not address reassembly, which is MUCH harder. In particular, organizing the birds nest of ribbon cables, while replacing pieces is a nightmare.
@nikkinmansurful Жыл бұрын
Yes because I cannot put the ribbons back so I can assemble the print head back.
@nikkinmansurful Жыл бұрын
I used your video to clean my print head, but I cant put it back because of the ribbons
@jayandjamison10 ай бұрын
Same here .
@FamilyCompany-qy5ex Жыл бұрын
first step didnt work for me. what did you save it as?
@clearcutmethod Жыл бұрын
Which part?
@lisaslists2000 Жыл бұрын
This was great - clear and followable and the f-bomb is one of my favorite words!
@candibeals9138 Жыл бұрын
Do you have a video of the inside of the printer printing?
@jasminnarain1911 Жыл бұрын
Thank you for your help. Appreciate your hard work and for sharing.
@skalyps1 Жыл бұрын
I followed the instructions, but after putting it back together, the printer gave me an error, the printer stopped working.
@HMcdon Жыл бұрын
Great illustration
@tayda_social Жыл бұрын
Thanks for valuable content, I wonder why you did prefer LEF2-300D and not Mutoh or Mimaki brand? Did you considered all other brands and decided Roland one at the end? Thanks.
@sinhasanket Жыл бұрын
This is a great video. I was exactly looking for this. Can you please post a video of cleaning the head ? I am also exhausted all the option of geting my 7710 working properly. This is my last resort but I have never opened printer before and looking for hand holding.
@bruceandler8924 Жыл бұрын
Thank you very much! Very helpful. I need to do this to mine and had no idea how.
@melissalewismiller5359 Жыл бұрын
I got it apart, cleaned the head, put it back together but im not getting any black. I replaced with a new cartridge, 2 printhead cleanings, let sit 24hrs, tested again, still no black. Did 2 more cleanings & let it sit, tried again & its finally faint. Ive used almost a whole cartridge of black but its not showing on paper. Any suggestions? No errors are showing.
@mouseminer2978 Жыл бұрын
Hi, Can you make a video about your reviews and maintenance of Roland UV printer. Is it worth for a small shop, what do you think. Thanks in advance.