@@JeosvanySanchez-mf3pf doesn’t matter. When i just use it for lighting it idles low but when using high draw items it automatically idles up.
@JeosvanySanchez-mf3pf20 сағат бұрын
@@ratcamaro ok thank u brother 🙏so I don’t even touch the botton at all?
@ratcamaro20 сағат бұрын
@@JeosvanySanchez-mf3pf i would idle it down if you’re not powering anything to save fuel.
@JeosvanySanchez-mf3pf20 сағат бұрын
@@ratcamaro thanks brother just purchased it hope it treats us good Laugh out loud anyways thanks once again have a blessed day 🙏
@bandmoutdoors6692 күн бұрын
I have a 355 sbc with 72s in the primaries and 82s in the secondary's and I'm running a 5.5 power valve the AFR is pretty good at idle but a mid throttle is a little rich around 11-10 on the AFR what should I adjust the power valve or jet down the secondary's and its a tad bit rich a full throttle any preferences?
@ratcamaro2 күн бұрын
@@bandmoutdoors669 mid and full throttle you’re mostly on the main jets. You can jet those down. I like my motors to be a little on the rich side because i also have nitrous so doesn’t hurt to have it a little rich.
@bandmoutdoors6692 күн бұрын
@@ratcamaro that's true might go down another from 72 before I had it at 75 and I might also might down jet the secondary's a little bit and might put in a 4.5 power valve thanks for the advice
@ratcamaro2 күн бұрын
@@bandmoutdoors669 Also keep in mind that the power valve enrichment is roughly 6 jet sizes which is why i jet mine 79 pri & 85 sec. When throttle is wide open jetting is 85 85 in theory. Works for me but every motor is different. Good luck!
@bandmoutdoors6692 күн бұрын
@@ratcamaro oh I see thanks for the advice once again!
@bandmoutdoors6692 күн бұрын
is there anything else I should take into consideration ?
@Classic_car_kid12 күн бұрын
Starter: I'm tired, boss
@BillyLintzenich-wf7sk3 күн бұрын
That 454 needs a serious tune up. Lol
@808Mark3 күн бұрын
How many hours a day do you two usually dedicate to hunting? I've wanted to learn but I don't have much time usually
@ratcamaro3 күн бұрын
@@808Mark We spent about 6 hours each day hunting.
@StiffShot4 күн бұрын
Can you tell me what ammo do you usually shoot with your ruger American 300 win mag?
@chukygarcia27065 күн бұрын
Ole peggen legged from Canada said u dont have to worry about the starter or batteries
@fabianruiz6116 күн бұрын
THANK YOU!!! I forgot to ask how this works at the dealership 😭
@melvinsacromentoe6 күн бұрын
How do you like these rings?
@ratcamaro6 күн бұрын
@@melvinsacromentoe sorry just mounted for a friend. Cannot give a full review on them.
@RebeccaKenworthy7 күн бұрын
That thing is unreal, would be fun to take to the U S Powercruise and run some no prep racing and some laps around the track baking tyres... 😂
@joshrobles73687 күн бұрын
Does installing this void the warranty?
@ratcamaro7 күн бұрын
@@joshrobles7368 No
@michaelwilson215110 күн бұрын
More sauce... 😌 I can smell it from here... ❤
@barrymonroy713812 күн бұрын
This video deserves better filming
@Sharpbevel13 күн бұрын
Nice video. Thanks for posting.
@purdyboi807816 күн бұрын
Wow...i know shes using both hands, but she plays off that damn recoil like shes shooting a .22 long! Now just get her to snarl her upper lip while she asks... 'You feel lucky? Well, DO ya....PUNK??
@felipepalacios302216 күн бұрын
What skid plate do you have ?
@ratcamaro16 күн бұрын
@@felipepalacios3022 Truck is 100% stock
@purdyboi807816 күн бұрын
Whoa! What the...?? Insane! Unless they know each other, u just know that Chevy ll driver did a double-take when he went past...like, WTF?!! 😂
@purdyboi807816 күн бұрын
Wow!
@purdyboi807816 күн бұрын
Damn bro, u was gett'n it!! I love that trail. Whatever cam you're using is smooth af! I could actually hear u breathing. It almost felt like i was on the ride...I kept leaning left/right! 😂
@purdyboi807816 күн бұрын
Noice! Havnt heard that whine in a while. Had one on my '69 Chevelle SS back in the '80's in HS. Wish ild've kept it 😢
@purdyboi807816 күн бұрын
Hey, whatever's clever i always say! Good job bud...nice ride! Watching/subscribed from NorCal 👍🏼
@DreBailey-m7v16 күн бұрын
Why so big of stall
@ratcamaro16 күн бұрын
Xtreme Energy™ 240/246 Hydraulic Flat Tappet Cam for Chevy Small Block street/strip applications. 2800+ Stall, likes headers and gears. Rough idle.
@T3kcheese17 күн бұрын
🤘 🇺🇸
@kbkesq18 күн бұрын
Good stuff. Get a limbsaver recoil pad you’ll like it.
@JacobMoy-ij5om18 күн бұрын
What state is this ?
@ratcamaro18 күн бұрын
@@JacobMoy-ij5om Hawaii
@JacobMoy-ij5om18 күн бұрын
@ratcamaro that what I thought . I was like I know that accent. I'm born and raised and lived all my life in Hawaii. Big island . So cool
@808Mark18 күн бұрын
I don't the trails over there but if it's not far from the road, maybe you could use a drone to spot the area before you bomb it. But then again I'm not sure if drones are allowed there with all the helicopter traffic but then again you would be flying low
@ratcamaro18 күн бұрын
@@808Mark We always have another rider check the trail before we hit it.
@kezrolg18 күн бұрын
Noisy gears and all sound amazing.
@Jake-fm5oe19 күн бұрын
She's in the driver seat looking like that.... SHES MARRIED 😂
@DerrickBlosser19 күн бұрын
ARE YOU MARRIED ARE YOU SINGLE
@Juba_assasin019 күн бұрын
Can we modify it and make it take magazines?
@dravenmcgee318820 күн бұрын
How's that scope holding up with the recoil
@ratcamaro20 күн бұрын
@@dravenmcgee3188 holding up fine. No issues.
@suzay2120 күн бұрын
Aloha brother. How long did it take for that part to get shipped to you? Thinking about getting this to so I don’t end up going to the stealership to raise hell and wait months for a replacement part.
@ratcamaro20 күн бұрын
@@suzay21 they 2nd day aired it in. Was at my door in less than a week after i ordered.
@suzay2120 күн бұрын
@@ratcamaro mahalo. Just ordered it. Thanks for the quick response and informational video.
@suzay2120 күн бұрын
One more question. Did you have to remove the abs line
@ratcamaro20 күн бұрын
@@suzay21 yes just unbolt brackets for easier access. I show it in the video. You can do the job on the ground. No need to even jack the truck up.
@gaelamerijckx22 күн бұрын
how do you know where each sides of the shock have to go?
@ratcamaro21 күн бұрын
@@gaelamerijckx i install it the way i took it out.
@StudioTrainor23 күн бұрын
Mine was to the left too! What the heck. Just brought it to my gun smith and he fixed it for free
@defendpolicedefunddemokkkr697624 күн бұрын
I always thought righty tighty, lefty loosie but it's the opposite here.
@jimmycapps365324 күн бұрын
Sweet ride my friend
@Okie67626 күн бұрын
Cute and funny❤❤❤❤❤❤❤❤
@bobhalstead187927 күн бұрын
Great toy for dogs and cats
@glydin127 күн бұрын
❤❤❤❤
@raymondrogers599928 күн бұрын
What is your sit-up brother I have the same rifle with a viper vortex
@ratcamaro28 күн бұрын
@@raymondrogers5999 set up in video description
@danfagundo50828 күн бұрын
Maybe that's what went wrong. I never rotated the 90°. Every time I take the barrel off the spring goes flying with the black plastic cap thing. Bravo, thank you!
@mec63529 күн бұрын
You suck
@Mongoly35729 күн бұрын
Sick, love your content.
@stefanbloch336329 күн бұрын
Auf schiesst dieser man?? Kein vergleich möglich ??
@highonlifefishing4007Ай бұрын
Will this work for a model 586? Mine fires 3 maybe 4 out of 6
@ratcamaroАй бұрын
@@highonlifefishing4007 it should work on most Smith & Wessons
@peterschlosser7605Ай бұрын
Thanks, helpful.
@MattsYoutubeChannelАй бұрын
You ate them sumbidges for breakfast. Nice
@rattusrodneyАй бұрын
mtn biking illegal in waimea canyon man. how stupid are you
@albertoanaya1669Ай бұрын
How long is the plug you took out? Need to make one for my mossberg
@ratcamaroАй бұрын
@@albertoanaya1669 i can see if i can find it and get back to you.
@ratcamaro17 күн бұрын
This one was 13 1/2” for some reason. That’s the entire length of the magazine. The the plug put of my Mossberg 500 12 gauge was 9”.