What if u have different color wires

By any chance do you have a video on how you put it all together, with the wire harness? That’s all I need to do, but I have no clue on how to do it and I can’t seem to find the instructions anywhere

U never showed us the screen in the carburetor,because u didn't clean it, all u did was take the carb off turn the camera off, put the carb back on and turn the camera back on. Good guess huh, thanks for nothing Loser

Im building one for my 7 yr old with a 79cc predator

This video really sucked. It showed nothing.

I'm doing something like that but I cannot figure out what sprocket to use the bore of the sprocket doesn't match to the freewheel on the original

Thank you young sir! Appreciate good people like yourself

40 mph!?

Well. That's what I figured. Had engine miss, pulled the valve covers after testing the coild and found that exact same pushtube bent. The complete head on Amazon is less than $400. Guess I'll be ordering one.

I got a new engine and my new engine has two yellow wires instead of one yellow wire and one white wire (which is what my wiring harness has) so I can't connect it with the simple color code like I had it before and have no idea what to do now can I just connect one of the yellow wires from the engine to the yellow on the harness and then connect the other yellow wire from the engine to the white wire on the harness or will this break something? please help anyone!

Cool mower but you didn’t show many videos on it just kinda showed a whole new mower😂

over heating on alum blocks

What did you use to Lock the sprocket

dude you really didnt show anybody anything learn to do a better job

Very nice. I am going to add to my portable air storage. Great idea.

Hey, I just bought a razor MX 350 off of Facebook marketplace and it seems to be that when I lift the back end up the tire spins fine and the throttle works.except there is some little noise, I think it's from the chain but other than that it's fine but whenever I go to Drive it/ sit on it, it doesn't move and I know I'm not over the weight limit because I'm about 110 pounds. Do you have an idea on what it would be?

I guess he never did what he said he was going to do 😅

What are the wires in the engine called?

How could I find out what stator is stock on my Lifan 125cc Apollo RFZ x18 bought the bike used and somebody has Jerry rigged almost everything

Out of curiosity, how much do you charge for a quick carb cleaning like this?

Great content!! 👍🏾

Im trying to wire up a temu 125cc loom to tf125..im only wanting spark ive got 70% done maybe but if i remove the rest of loom the wires are connected to other plugs and i dont know where to connect them. Can you point me in the right direction please.

So you don't know how to wire the motor. You only know how to plug in wires! Piontless video!

If you look they are wired in series so its 24v you have an m18 so you went down on voltage but up on the amp output with the miluwakee

Thx

Walk us through the wiring

His battery mod does work yall. I did it myself its actually pretty easy. The controller if you read on it, its got a labled sticker showing how it takes 4.5 volts away which might not seem much but it does slow down how the motor will work with the batteries. I myself just ended up using the only other stock battery left that was working for me which is also why i did this. Having one bad battery will fuck up how the speed works on your bike. It does indeed go faster but only if you have a bad battery aswell as the controller taking some small voltage away from it. Also in my occasion it mightve worked a little bit better even tho its just s 12v stock one because i didnt wire back up the throttle pretty much just cause i dont know how to but using the throttle takes some small voltage from the battery aswell making the battery not just drain faster but making the bike run a bit slower than it should. So yeah i guess it worked on me mostly because one of my stock batteries didnt work anymore and also the throttle ouhh aswell as the breaks, i cut off the breaks a good while back. Dont know hwy i did it tho.. but yeah i cut them off.. i believe that takes some of the battery voltage aswell since the stock drum breaks are battery powered. Dont believe me? Then why does the break hook up to the one controller that needs to take voltage from the battery in order to work? But yeah i guess that kinda helped me. Thinking of maybe putting on some regular bike breaks and yes those will work i saw a guy do it to his and it works fine. They dont make the bike break instantly so not the most reliable when going downhill illd say yet still they wont take from your battery so thats a plus on my side. Now i just gotta buy a bigger motor like a 48v model to put in a 40v ryobi battery for it to last as long as possible. Also i weight around 135 maybe 137 so thats saying something about how well his mod works

Can you do a full tutorial on how you installed the drill battery? Ive seen some tutorials on youtube about how to do them but they all end up using the controller aswell as 2 drill batteries. Ive only seen one other dude here on youtube apart from you doing this but he only explained and didnt really show a tutorial even though his video title said it was a tutorial. I wanna install a 40 volt ryobi battery on mine but i dont know how to and i wanna know how to do only just one battery instead of 2

Did you take down the small metal piece that separates the batteries from the electirc stock motor? I believe i have this exact model of the mx350 in black. I wanna change to a gas motor since i believe it could be more reliable. Kind of a wierd question aswell but if you dont mind me asking.. how much do you weightt exactly? I weight around 135-137 lbs and from what i know these models can support a weight of up to 140 lbs since thats what it said online on the razor website but i dont know if its just the stock electric motor thats capable of running at a certain speed with that weight? Ive seen some small pit bike gas motors that say in the specifications they can handle a weight of up to 440 lbs but it might just be false advertisement? Im not so sure about that. I know the frame built quality in these is pretty great since they have a good amount of weight on them and ive heard they're the most difficult model to manufacture in terms of the frame since they try to make these as stiff and reliable as possible to be able to handle such weights. If you could let me know then i would appreciate it. Also like i mentioned before did you take down the small tube that separated the stock motor from the battery compartment? Im asking since it looks exactly like my model of mx350. Did it have the small metal tube that separated them at all? If it did then would you mind telling me if you struggled alot to tear it down? And aswell as have you had any issues from tearing it down? Will me tearing that metal tube down make the frame weaker or is it something that doesnt really affect the bike in terms of the max weight it can handle?

Nobody in their right mind would buy this tweaker junk.

Solution recipe?

Do you know the correct replacement throttle cable that’ll fit this motor? My sons bike is missing the throttle cable and twist grip

hmm i have an fs45 and it idles but on full throttle, it dies. On mine, the exhaust unit is a sealed unit (there is no nut to unscrew) to find the spark adjuster. any ideas anyone? Are there fs45s without a spark adjuster? thank you.

Hi there, just wanting to ask you if this would work on electric start engine as well cuz mine has both kickstart and electric start setup just wondering though if kickstart wiring harness you have would ever work on electric start without battery any advice?

Simple but effective video. I got my pit bike running 🤙🏽

Would it be possible to text you what my new engines wires look like? The wire colors are completely different

The hidden ones usually yellow are for electric start and white lights I think

Alot of fucking ums

I flipped the wheel and locked the sprocket, but the brakes only work if I go backwards, it has no stopping power going forward. How did you get the drum to work on the other side?

Can I get a link for the parts

Blud is the king of yapping

That’s bad ass

You need a controller kid😂😂

The 91R is actually a 4 stroke. You should also adjust the valves. Stihl sells the valve cover gasket with the correct feeler gauge as a set for a few bucks

I have a honda tlr200 reflex I'm trying to rewire, can you link the Amazon wiring harness you purchased? Total noob trying to teardown and restore this bike. 😅

What kind of 2 cycle oil

What do you put on the battery to charge while the bike is on the yellow or the white?

Hey thank you so much for the information definitely going to let you know if it works 🙏🏽

You literally didnt show how to route anything.

Good