You forgot to tell them, that the standard is 12mm hex….
@ramilamrahov8808 Жыл бұрын
What is a size of hub inside hole?5mm?
@6.2gallo Жыл бұрын
How did you make your wrench go thru the antenna
@zanesturgis95702 жыл бұрын
Do they still make them tires
@Revdonlee742 жыл бұрын
Awesome video, Homie! Do you have a link to the adapters you used? Thanks!
@ramilamrahov88082 жыл бұрын
after change new hex adaptor we should change old tires also?
@aj.alonzo.9562 жыл бұрын
Mine just keeps spinning how did you take yours off
@rivera110118 Жыл бұрын
Same mine just keeps spinning
@mcqueenmessi38766 ай бұрын
@@rivera110118did you figure it out
@kenc4s1342 жыл бұрын
I put some tape over the air holes in the rim to avoid getting water in the tire when cleaning them, nice video
@jfitznc3 жыл бұрын
Hey man, awesome video. Thanks so much. This is the first time I’ve ever had to fix my car and wasn’t sure I could do it. You made it incredibly easy. I normally would have taken it to a shop and you save me a bunch of money. Thank you.
@goneviral60373 жыл бұрын
Have you ever broke one? How did you like them?
@corolla39473 жыл бұрын
What are the front tires and what brand
@RCdeadpeople2 жыл бұрын
Proline Mohawks
@adamtomasko3123 жыл бұрын
Thanks man, very helpful!
@madaxman723 жыл бұрын
Um.
@denariusag3 жыл бұрын
Doesn't help when trying to swap the original but thanks for the waste of time
@qgonzalez88523 жыл бұрын
Thank you!
@jasonphillips42293 жыл бұрын
I wonder if you can use these to change the offset on the rustler 2wd the front and rear are offset I just bought the wide a arms and camber a toe links to compensate for the offset.Im thinking if I use those 17mm hex extensions now it would make it hella wide.
@seanbryant3453 жыл бұрын
Um
@stevenmontgomery94243 жыл бұрын
Is it 3/8" or is it a metric size? I'm having trouble trying to fit a 3/8" wrench over it.
@queithai90353 жыл бұрын
Has anyone else problems with getting the old driveshaft out? It just won't get loose
@Coldfv.10 ай бұрын
I am having that problem right now
@scu-dub3 жыл бұрын
Will these work on a Traxxas rustler 4x4 vxl? I can't find shit for the thing I want some big wheels and can't find 17mm hex hubs for a rustler 4x4......I want orange and can't find any color though do you know where I can go? Thanks bud
@DesertGlowDetails3 жыл бұрын
The hot racing adapters will work you won’t find them them in orange but they have red....I have them on my rustler with the arma infraction wheels....on a spectrum motor & esc 80a (3s)... 50 tooth spur 21 tooth pinon....I hit around 60mph
My Traxxas slash center driveshaft has a different fitting for the front differential???
@Hirthirthirt4 жыл бұрын
unfortunately the adapters you used suck...the widen the track....
@pablomoche4 жыл бұрын
Hi, can you help me ? My old e savage is still working fine, but it has 14 mm hex hubs( factory ) and I can t find the right wheels; I m not sure if I must buy a converter to 17 mm for example, or just change the actual nuts to 17 mm ; thanks a lot ( it has a 5mm axle)
@Toddothegoddo4 жыл бұрын
cool vid. But, why do your thumbs bend like that?
@JJRX4504 жыл бұрын
If it’s a four by four the you should have paddle tires on the front but that was still helpful
@timwilliams68944 жыл бұрын
I bent mine the first time I drove my ultimate. 😒
@polocash114 жыл бұрын
How much axle width is added with 4wd version?
@danielvanderheide7774 жыл бұрын
Thx for the tutorial
@MrBaldChronicles.4 жыл бұрын
Thanks helped allot going from revo to xmaxx
@jamesplymire53424 жыл бұрын
You didn't build that trailer.
@shakerumps4 жыл бұрын
Uhmm uhmm uhmm uhmm uhmm
@eddiecox93704 жыл бұрын
Where did you get your prop and how much better is it then the stock prop, thanks
@perfecty4584 жыл бұрын
not dirty crack head
@prodee19905 жыл бұрын
Wat are those front tiires? looks dope man. Good video
@Kalifero6194 жыл бұрын
Sand tires bro for better turning (steering) on sand
@RCdeadpeople2 жыл бұрын
Proline Mohawks
@lastcall1705 жыл бұрын
Please leave a link for product ....thanks
@neil92425 жыл бұрын
Save water clean them in a bucket of some sort unbelievable.
@kenc4s1342 жыл бұрын
I just turned my sink on and I’m just going to leave it on for a week or so nice comment.
@Samirshah7745 жыл бұрын
I have questions . I do you one like this. It’s don’t start? Any idea
@robsilv1485 жыл бұрын
Nice video 👌
@nicmc30775 жыл бұрын
What are the little black inserts called?
@Dieselboy4205 жыл бұрын
Bad ass Fossett
@rickyjohnson9745 жыл бұрын
Wd 40 on bearings 🤦
@beautynads5 жыл бұрын
Does anybody know the best way to remove the threadlock from the adapter threads? Traxxas puts a lot of threadlock on the adapters, and it made it very difficult to tighten the outer wheel nuts.
@donmichaelcorbin44174 жыл бұрын
Heating them with a butane torch type lighter will loosen them up.
@037925 жыл бұрын
When you change out half the parts when you don’t need them 🤣
@carlosmartinez-ru5me5 жыл бұрын
Thank you. I need to change the hex hubs on my big rock rc bc I need bigger tires to improve the stability.
@MrKingNica5 жыл бұрын
Why at about 6:50-6:54 it looks like your hex adapter isn’t all the up against the axle pin meaning not installed right? I find it even more strange being that you were able to screw the middle Allen wrench screw all the way.
@j-1lokes2945 жыл бұрын
What brand are those hex
@j-1lokes2945 жыл бұрын
the stock body fits well with those hex.
@MrKingNica5 жыл бұрын
Great video bro. Extremely detailed explaining things in extreme clarity I really appreciate this video man. 👍🏼
@Flyingsgetti5 жыл бұрын
What if you dont have hobby grade you just have a modified cheap car that dosent havw those holes in the axel for the pins? like me nigga.
@chapc5 жыл бұрын
Why the heck. You replaced the thing but never actually put anything on it so we still don’t know how they work. I thought it was going so good. Then it’s like you just stopped, half way through, and nothing.
@DeRock4013 жыл бұрын
Lol and he replaced the pin with the same exact pin.
@jonathanmahler71595 жыл бұрын
When i tried this on my 2014 the shaft snapped. I didn't even put the boogy woogy on it. Thank God where it snapped left me like 4 threads to attach to.