Would this work on this model as well wf45r6300av

I used a bearing press tool.

Did you retain the bearing to the shaft this time since the shaft is worn out. that why it doesn’t spin and the bearing actually works ?

awesome, seen how i can do the shocks !

Thank you so much for putting this video together! It was a huge help and I greatly appreciate it!! Saved me some $$$

Buena reparación. El problema El eje queda tocado .desgaste por retén.

I know this video has been out for a while. I hope someone can help us. We have this same washer and having a hard time finding the spider arm for this unit. If someone could point us in the right direction on finding the correct parts number or compatible number, it would be greatly appreciated. Thanks

Great video, thank you.

Excellent video! I needed to replace the front gasket on my Samsung and I felt like a genius! Little did I know I had much to learn 🤦🏾‍♂️🤦🏾‍♂️🤦🏾‍♂️. My bearing has gone out as well. Time for an LG direct drive washer!

You’re not supposed To knock those bearings in the tub with a hammer metal to metal you could damage the bearings not very smart you should use a piece of wood to knock them in

!!!IMPORTANT!!!! I have this almost exact model WF50k7500AV/A2, I couldn't figure out why it was grinding after I bought the back half of the plastic tub with the bearing's installed already and a new metal tub with the shaft, the whole thing was brand new from Samsung parts about 800$. if you get the back plastic part of the tub with bearing installed even though it's O.E.M, they must have redid it because my chrome spacer plate under the Stator rubbed bad, it made little grooves on the inside of the Stator cover Knew it had to of been the Spacer plate. I took out the adapter plate and it's like new..... thought it was the new bearing's at first figured it out, it was a pain so ya im pretty sure the tub with the bearings was redesigned to not need the adapter plate. anyways few days of headache's but figured it out just a heads up.... your video was excellent the only difference on your model compared to mine was my dispencer bolted in from the top not the front and I had 2 screws in the bottom underneath that held the front face on... thanks for the awesome video.

Great video! Thank you for also recording how to put it back together after replacing the parts. Very helpful

Hi, thank you for the video. I have a Samsung front load washer WF361BVBEWR/A2. 01. I changed the rubber seal a few weeks ago and since the the machine vibrates and moves to the left only when the spin cycle gets to the high speed, then its fine. It only moves probably 2 times per the wash cycle. Otherwise is doesnt move or shake the rest of the cycle. Any thoughts? I changed all 4 shock absorbors yesterday and still moves. Do you think it could be the bearing. Any feedback would be appreciated. Thank you

at 9:26, using the old bearing to knock the new one into place is a nice trick.

Great Video! I'll be doing this next weekend! thanks for sharing.

Thank you!

Thank you! Very helpful

That was easy 🙄

Repaired mine today, $40 on Amazon, about 3 hours and 2 cuts but got 'er done.

How cane I open the door handle? No screw found

Cannot thank you enough for this video. Gave me the confidence to open up the washing machine. My drum was not rotating, totally stuck and I was pretty sure something was stuck in it. Called Tech who charged 170$ and told me that there was some problem with shaft and asked me to replace it, my unit is only 3-4 years old. On opening the drum, I found broken kids scissor which was getting stuck. Not sure how it ended up there. Few tips/suggestions, it is not this quick and takes lot of time, many hours, so be ready for it. You can take pics of every part you are opening so that you can put it together back again by looking at the pictures in reverse. The drum is heavy so you may need help. Also, I felt it would have been easier for me to put the bolts which tie the drum to hydraulic suspension on the back side if I had put the weights first on the front side. Without it the drum becomes lopsided towards the back and a major pain to put the bolt in. Make sure you fix back everything based upon pics, I had missed putting the screws for the sensor on top of the drum and due it the machine would not go into rinse cycle. Took me 2 hrs to figure that one out. Nothing beats the thrill of getting it done and saving tons of money, even if you do not fix it you have practiced enough for future issues ;). Hope this helps someone in future.

I just fixed mine to it was all day but works like new now the oil ring is dc62-00156a

Anyone no the part numbers for seal and bearings and we’re can I get them thank you

Is this a vrt? Do they have belts . Mines not spinning because a big blanket was put in and now it won't spin . Any one gone threw this? Please help

I know it's been 2 years since you made this video, however could you please tell me exactly where you bought the replacement bearings from???? Having a very hard time locating the right ones, there are alot of different ones evidently. Thanks!

Good job bro!

You made it look TOO Easy. @4:50

That’s a beautiful machine

3

My washer stopped spinning today. Motor works just fine, but the barrel doesn't move. While I'm fairly certain it's not the bearing that's the issue, this video is still going to be really helpful to me tomorrow when I start ti disassemble it to find the actual problem. Thanks!!!

What a man!

I own the Samsung WF42H5600AW. It seems I now get to do this onerous chore. Bleh.

A superb, no bullshit video!

any idea i have replaced eprom board and machine powers on but nothing on display just flashing ? do i need to reset it or what it does not react to all i hear powering on sound and thats it after that just all light flashing but not reacting to anything else except power on and of

Well done JB,I normally get really bored watching these types of videos, but I watched the whole thing no fforwards. I can't seem to get the drive belt to stay on my machine. So hats off to your patience and skills👌 👏 🙌

You are washing machine super man.

Thx for this very video. What's that ring or washer you put on before putting the seal in at 9:43

Lo

Hey where did you buy the parts from?

Great video with no commentary. You help people save money. Thanks.

Great vid. What crap they now make. If they would keep speed slower on spin and let it run longer. Bearing and seals would last. Check old spin rates and the new sonic spin rates.

I watched your video twice and then dove in. Took all day but my wife thinks I’m a superman and my buddy’s think I’m a god. Thanks SO much for posting this video. If you are ever up here in Canada and near Hamilton, Ontario I owe you some beer. And up here in Canada we put alcohol in ours. Cheers! Derek

He is strong, fast. The woman's dream.

Where can I find the assy shaft(spider arm) and what's the part & for after market, since Samsung discontinued the part

Nice job JS, thank you for sharing this, I might just tackle mine now you've shown me how it's done. Thank you once again.

Outstanding video

God bless your bro… you have some patience… I was thinking about changing mine, but just looking at this makes me nauseous… But good for you… 50 bucks.. well worth it if you’re that skilled

Bravo. Excellent job. Thanks for the video.

Truly fantastic video. It was extremely helpful. Thank you so much for sharing your expertise. 🙏👍

Be cheaper to just buy a new one