Awesome video ! I have the same problem and would love to give a try. Pls help to share the dimensions of both blinds and cutouts for holes. If possible share your contact too.
@WowKidsUrl3 жыл бұрын
Main shift blind dimension: 58mm wide x 213mm long
@MrHashim854 жыл бұрын
Thank you
@WowKidsUrl3 жыл бұрын
You're welcome
@MrHashim854 жыл бұрын
Great work Thanks alot
@WowKidsUrl3 жыл бұрын
Most welcome!
@painful19784 жыл бұрын
Would it affect the power of the air flow?
@alisadek37314 жыл бұрын
What is the size of the plastic for both gears please ?
@WowKidsUrl3 жыл бұрын
58mm wide x 213mm long
@interdec4 жыл бұрын
Good video, but I didn't get the relevance of the awful music.
@pasindurathnayake42604 жыл бұрын
Great work
@WowKidsUrl3 жыл бұрын
Thank you so much 😀
@hiandby-ashraf63354 жыл бұрын
What's the dimension of the plastic
@WowKidsUrl3 жыл бұрын
58mm wide x 213mm long
@Hishanpavidu4 жыл бұрын
hey. my gear shifter got broken last week. I was thinking about doing this but I wanna know how did you hide the blank spot when going to sport/manual mode? I also have the rubber piece underneath slider where it used to hide the spot also, what's the measurement used in 4wd gear slider... thank you
@Nidhinpjoy4 жыл бұрын
Thanks. I done this on my car
@WowKidsUrl4 жыл бұрын
Glad it helped
@CarantaCR4 жыл бұрын
Amazing vid. Keep up the good work!
@WowKidsUrl3 жыл бұрын
Thanks, will do!
@nelyambao62894 жыл бұрын
now i know tnx a lot sir 👍
@WowKidsUrl3 жыл бұрын
So nice of you
@jhunebabasa5974 жыл бұрын
Did the same, good idea, but whats better is to get a black plastic strip instead of a white one then wrapping with a black sticker, with a black strip you dont need to wrap it witha sticker thus making it more thinner and will slide better
@Hishanpavidu4 жыл бұрын
What was your solution for the blank spot when on manual/sport mode. i was thinking about making this weekend and i have a other rubber part under the slider to hide it
@WowKidsUrl3 жыл бұрын
True.
@jas5854 жыл бұрын
Wow thanks i followed your instruction and i did it..thanks a lot!
@guthriethornley82454 жыл бұрын
Hi!! Love the video! 🙂 I think you should use smzeus[.]com!! It would help you grow your channel!
@obaydamd4 жыл бұрын
Amazing work
@sulaimanalkindi84864 жыл бұрын
Thank you, very helpful video 🌹
@ibrahimrabbi74804 жыл бұрын
What did you do in the end? How was the fix after opening
@WowKidsUrl4 жыл бұрын
while taking the bottom cover that pipe will also comes along with it, make sure to pull the unit carefully.
@ARandomGuy4475 жыл бұрын
Please make a video how to fix the wiped in rear, thanks!
@ARandomGuy4475 жыл бұрын
Please make a video on how to remove the rear right side tail light. thanks!
@ARandomGuy4475 жыл бұрын
Please make more videos about basic works on M Pajero. Thanks!
@ARandomGuy4475 жыл бұрын
Sir what is that 2 blue color? is that a rubber you made instead of plastic lock? i have a problem on the rear right side light and the lock is loose. i hope u can help me.
@WowKidsUrl4 жыл бұрын
Blue borders are just a plastic wrap (actually it was brought for wheel rim protection)
@ivandearaujopereira5 жыл бұрын
Awsome instructions and video !!! How to take off the cover of gear shift ? You showed putting it back at 9:06. And also how do you avoid the hole for the stick being seen in sports mode? Thanks !!
@WowKidsUrl4 жыл бұрын
Just pull it from the edge of the cover by using a flat shaped tool carefully.
@atharchaudhary38125 жыл бұрын
Very helpful and informative video. Cheers my friend!
@shivsheikh5 жыл бұрын
Hi please can you make one for my car? I would much appreciate it!!! SM, Dubai
@carpenter1655 жыл бұрын
Hi I have a uk 2014 shogun as they are known here, and I have been trying to add extra driving lights to the side cluster as well as having them in the bumper. Do you know what i need to do or find a set.
@mrpatchara5 жыл бұрын
Great job...thanks for sharing
@mohamuza1095 жыл бұрын
Wooow MASHALLH 😘😘😘😘😍
@niltonsantarosa97685 жыл бұрын
gostei vou fazer na minha
@oliverestrada71415 жыл бұрын
Thanks for your video! It is very helpful... I need to replace my blind as well....
@mfmike065 жыл бұрын
Hello, are u based in Dubai? can you give me your location?
@Alaaelroomi19875 жыл бұрын
How much would you charge to do it for me ?
@rajeshpj20065 жыл бұрын
super
@denden11415 жыл бұрын
Привет! Подскажи, пожалуйста, как ручку АКПП разобрать? Спасибо!
@riyazsait5 жыл бұрын
Hello it's very helpful, could you pls clarify the hole dimension is 47mm x 12mm and how about the location to make hole on main shifting gear blind
@WowKidsUrl5 жыл бұрын
make at the center of blind (half of the blind length)
@padiyoyo6 жыл бұрын
Thank you for the video. Very clear. It helped me a lot.
@mohdusef6 жыл бұрын
How do I make blinds, pls assist, mine is damaged
@AdedejiOgunnubi6 жыл бұрын
Alternatively, is it possible to buy the accessory at all?
@AdedejiOgunnubi6 жыл бұрын
Thanks for this. My Pajeros got exactly the same problem and no one seems to know what to do. May I ask what exactly was the product you used to cover the plastic?
@WowKidsUrl5 жыл бұрын
any vinyl sticker
@fazzinvancouver6 жыл бұрын
Sir but I what is the benefit of installing a cabin filter, when pajero doesn't come with 🤔I mean it already has an AC Filter isn't it
@WowKidsUrl6 жыл бұрын
The filter is optional and may not be installed in all models pajero
@harwoods115 жыл бұрын
@@WowKidsUrl it's not fitted to my shogun sport 2.5tdi 2002 uk
@daliborp82854 жыл бұрын
No Filter in my Pajero 3.8 Mid Range - GCC Specs
@sab2494 жыл бұрын
@@WowKidsUrl This is wild! I watched a bunch of videos and kept saying to myself "I dont see the screws!?!?!?" My 2003 Montero Limited did not come with a filter! Thanks for the upload
@WowKidsUrl3 жыл бұрын
@@sab249 initially i too scared to cut it for fixing the filter.
@massoudh7676 жыл бұрын
Hey, thanks so much, that was awesome buddy.
@marsvenusplanet6 жыл бұрын
thanks so much...may i ask at which length i will make a hole on the plastic...thanks
@WowKidsUrl6 жыл бұрын
Hi Marbz, The dimension of hole on the plastic is 47mm x 12mm (Length x Width).
@marsvenusplanet6 жыл бұрын
thank you very much sir...hope for your more blessings and success.
@marsvenusplanet6 жыл бұрын
you mean at 47mm i will cut the hole? sorry
@marsvenusplanet6 жыл бұрын
will i position the hole at the middle portion of the plastid sir? thanks a lot..
@WowKidsUrl5 жыл бұрын
Yes
@williedizon4276 жыл бұрын
How do you avoid the hole for the stick being seen in sports mode?
@enterinsideyt6 жыл бұрын
Hi, your video is v helpfull. Wat dimention you cut the blind?
@WowKidsUrl5 жыл бұрын
Size of the blind 58mm wide x 213mm long The dimension of hole on the plastic is 47mm x 12mm (Length x Width).
@trailrush6 жыл бұрын
hy can you give me the dimensions for the main shifting gear blind ?
@WowKidsUrl6 жыл бұрын
58mm wide x 213mm long
@shirleyregudo91445 жыл бұрын
A6
@davidisaac79445 жыл бұрын
great video boss congrats for posting this can we get your contact so i can replace my also.