Cables sizing and protective equipment for various appliances used was not mentioned.

easy to understand, thank you

I have a 330w 24v solar panel and 30A mppt charge controller rated ( 12v/24v) I want to connect to a 12v battery, can this system work properly? Please respond

Hello! Please I have one question I need to ask, the systeme efficiency it is for aller over PV systeme or they are changing?

what an amazing creator I'm trying to find this clear solar system and i was looking for an explanation so i found this.. thanks and good luck

Thier is no requirement to convert kw to kv

Hi, you have a 4 pole breaker, 2 x 3 pole breakers, and then 1 pole breakers. From your diagram as the 3 lives come in to the input of the 4 pole breaker as well as the neutral. On the output of that 4 pole breaker, the lives, l1, L2, L3 is feeding the 2x3 pole breakers as well as the 1 pole breakers. My question is. From the output of the 4 pole breaker, are all the lives coming from the output of the 4 pole breaker, meaning are you putting 4 wires into the output of l1, L2 and l3 and then feeding each into the 2x3 pole breakers and the 1 pole breakers?

One if the best , brief and to the point explaination of solar calculation.

AND RELAY PROTECTION

FUSE FOR THE CONTROL POWER

Thank you!

Merci beaucoup

Thaks for sharing video 3:57

Who learn you this

Good 👍

Thnks

there's an error in your schemtics you should connect the wire coming from emergency stop in NO in the contactor not in the NC

Very useful 🎉

Great work

Beautiful work

Super ji and useful video thanks

Totally wrong conection

Thanks a lot God bless you

0k

where is wire sizes calculation sir? thanks for the great vdo.

Thanks alot sir. Please why p.f wasn't considered when calculating for current??

दो मैथड 5 बार बातला रहे हो।

काहे बुरबक बना रहा है बे

😢😢😢 don't end up frying your house.

So those efficiency used are default or they differ

how should i connect with you

Very very informative ❤

The fond music is enervant. Some repetition on the calcul is not better. Keep the constant calcul until the end. Keep going.

I don't like the presentions, it is like for kids. We need a nice presentation, seriosly. A lot of publicity for nothing. 1x tube light but in picture there are 2 tube lights. 2x375 w solar panel should be ok to be choose. Maybe a presentation only on the single page should be better to have entire calculations and results. After, should be a general grille to calculate for any situation of solar panel/house power.

Very good 😊👍

how can you calculate the battery capacity without knowing how many hours will each consumer work???

For AC type 1 = type 4 and type 2 = type 5 = type 6.

useful 🙏

Please sir reply to this comment please i have one question to ask. Initially you wrote the formula for( power required from solar pv in watts)= total energy required from solar PV(wh)/effective sunshine hours x system efficiency But later in the video after calculating system efficiency you multiply all the terms instead of divide. You did----> power required from solar panel= total energy required x effective sunshine hours x system efficiency. Which one is right? = 3240 x 5.84 x 0.73 this gives 13812.768W IF I DO =3240/ 5.84X 0.73= 760Watts Which one is right? Please clear this doubt please

Sir i have query regarding mine 5kv solar on grid plant, mine system beep when i wash my panel or when it rains, after 3 to 4 hour sunshine plants become normal and start functioning. Sir need help how to find the error and how to rectify it. Thanks.

Very educative!

Step 2: how does 3240 come up? For the total back up energy per day

3240wh consumption is only under 280ah Lifepo4 battery, my formula is 280ah x 12.8v = 3584wh or maybe a 300ah lifepo4 Battery system. 400ah is too much

Nice

what is the software you are using, please?

This video could have completed in 3 minutes too effectively.

❤❤❤❤❤❤

One of the best explanations so far i have seen on choosing the right system. Thank you so much.

Hello, we are an energy storage-related supporting company, and we want to see if there is an opportunity to cooperate.