Aleks Mechanics

Пікірлер

@t-bagbagwell983 Күн бұрын

Super.!! 👍

@jorgesucantaipe3449 4 күн бұрын

Muy buen video, justo lo que necesitaba. Saludos desde Perú 🇵🇪

@ziyadakk 5 күн бұрын

This guy knows what he’s doing ! 👌🏽👍🏽

@imrantazim2688 11 күн бұрын

Hi.. Can a faulty or on the way out cv joint or drive shaft cause vibration/shaking on the streeing wheel whiles driving above 40mph please. (vw tiguan 2015)

@Aleks_Mechanics 10 күн бұрын

Hi. In my experience, yes it can. And the vibration/shaking is in some cases violent (like a death wobble)

@MS-yy2dh 21 күн бұрын

Thank you, but why are you using that strange socket attachment rather than a normal spanner?

@themahtikere9367 24 күн бұрын

Thanks. Good video.

@automotivepaint5664 Ай бұрын

Вот это масло грязное! И поршень в двигателе стучит. Какой пробег?

@juanmagana4095 2 ай бұрын

Nice thanks

@PkmHax 2 ай бұрын

Sont you need to replace the retaining ring on the end of the shaft?

@universal7372 2 ай бұрын

good job !

@Valuiskihh 2 ай бұрын

Can you tell, how much i can safely unscrew adjusting nut? :)

@Aleks_Mechanics 2 ай бұрын

I usually adjust it so the brake shoes gently touch the brake drum. And i try to adjust both sides to have the same amount of rolling resistance. (in motion on the ground, the side with the most rolling resistance wil usually lock up first) You want each side to hold as close to the same amount of weight as possible, when you set the parking brake on a hill, for example👍🏻

@Valuiskihh 2 ай бұрын

@@Aleks_Mechanics well, i tried to do all right fixed spring under handbrake, spinned adjuster screw so pads touch disc, but it is not enough and i already unscrewed about 1cm, but it was not enough

@Aleks_Mechanics 2 ай бұрын

@@Valuiskihh with the rear wheels off the ground, is it hard or impossible to rotate the rear wheels with the parking brake lever engaged? And how many clicks does it take for the lever to lock the wheels?

@kingofqueensqueens8720 2 ай бұрын

Dreckig, könnte mann sauber arbeiten...

@jeffjeffjeff2 3 ай бұрын

Really love your videos....the good angles, no silly music, showing the tools and tips too. Thanks so much.

@Aleks_Mechanics 3 ай бұрын

Hey, Thank you so much! This means alot to me, im glad you like the way i make my videos!😎

@jeffjeffjeff2 3 ай бұрын

Great video, thanks for sharing. I tried this on my car earlier but befire I watched this video. I tried to remove the lower bolt without lowering the control arm and I gave up in the end. I will try again by lowering the control arm

@Aleks_Mechanics 3 ай бұрын

Thank you so much! Im glad you liked it👍🏼 I did the same thing, that spring needs to be moved out of the way for that bottom shock bolt to come out!👌 Work safe!😎👍🏼

@Struktogramm1 3 ай бұрын

Very detailed, thumps up! 😊

@kenlem4135 3 ай бұрын

this page of replacing the turbo unit ,Im not happy the way your workmanship,cause i dont see you do the cleaning at all

@diegofal3388 4 ай бұрын

I got everything out but the turbo is not coming out . 2006 xc90 awd I have saturday and sunday to see how to get it out hahahahahaha 🤪🤪

@derekduke979 4 ай бұрын

Thanks for marking

@Kixiru 5 ай бұрын

You saved me from Spending money to go to a shop or dealership, now I know what to check and do to look to see if I have a oil leak in my ptc area or if it’s just splashed oil of when my turbo oil drain tube gasket was going bad and leaking oil everywhere thank you I own a Volvo v70 t5 🙏

@Aleks_Mechanics 4 ай бұрын

Glad the video was helpful, work safe!😎👍🏼

@jonathanvalentine1325 5 ай бұрын

*Promo SM* 🎉

@Aleks_Mechanics 5 ай бұрын

Thank you!✌️

@johnmano1439 5 ай бұрын

Hello! Thank you so much for your video. Could you please tell me what size is the crush washer for the oil pan? Another thing I just remembered, this 1.0 l engine isn't VVT-I, is it?

@tjordan7067 5 ай бұрын

Thanks my brother.....

@Aleks_Mechanics 5 ай бұрын

Thank you for watching! I hope you enjoyed the video If you like what you see, you know what to do. Click the LIKE button, and maybe consider SUBSCRIBE.

@netpravagolosa6259 5 ай бұрын

Зачем менять амортизатор если буфер сжатия в труху и опора. Салейнтблок в кулаке в очень плохом состоянии. Это хреновое спокойное творчество мастера не дотягивает до ремонта . Мастер делитант

@Aleks_Mechanics 6 ай бұрын

Thank you for watching! I hope you enjoyed the video If you like what you see, you know what to do. Click the LIKE button, and maybe consider SUBSCRIBE.

@tjordan7067 7 ай бұрын

Best wheel bearing replacement I ever seen thanks my brother you are the best I'm getting ready to go out there and put mines on right now I been trying to get shops to put it on but they want unless I buy the part from them but I already ordered my own part..thanks bro..👍🏾

@Aleks_Mechanics 7 ай бұрын

Thank you so much! I hope it went well for you!😎👍🏼

@herrtomov3480 7 ай бұрын

Super video bro. 10x.

@Aleks_Mechanics 7 ай бұрын

Thank you, i really appreciate it! 😎👍🏼

@tomaszosmanski846 8 ай бұрын

as simple as that

@SergeMoses-li8lr 8 ай бұрын

super mécanicien ! Félicitation

@the-unraveling 8 ай бұрын

I just struggled to get the turbo out of a 2004 XC90 2.5T and was kind of happy to see "i'm not the only one"🙄 with the replacing the turbo I split the two parts which made a bit easier. thank you for showing.

@MartinDorphins 8 ай бұрын

Awesome video man. You took the time to get some good highly quality close ups.

@Aleks_Mechanics 8 ай бұрын

Thank you so much! I'm glad you liked it i really appreciate it!😎👍🏼

@MartinDorphins 8 ай бұрын

00:44 😂

@mrstutz3333 8 ай бұрын

Is it mandatory to lower that lower control arm? I feel like you could accomplish this without doing that

@Aleks_Mechanics 8 ай бұрын

Thank you for you'r question! It's much easier if you lower the lower control arm, that way you get enough room between the shock itself, and the coilspring, to access the bottom shock mount bolt with you'r tools. Thank you for watching my video, i hope this answer was helpful to you!😎👍🏼

@tahirzeeshan500 9 ай бұрын

My undercarriage is really rusted! Took a lot of effort to get off

@Rumba1972 9 ай бұрын

M8 if only it was that simple why didn't you show you trying to get the manifold bolts out and how you have to drop the subframe to get the exhaust out of the way or removing the two egr stainless pipes and all the rest of it your video makes out it's easy when it's far from it isn't it..

@majkel5765 2 ай бұрын

That's true.

@samphillips4145 9 ай бұрын

Excellent video

@Aleks_Mechanics 9 ай бұрын

Thank you so much! I really appreciate it😎👍🏼

@YULABEBE 9 ай бұрын

Great vid thanks 😊

@ingemarberntson1419 9 ай бұрын

Bra film.

@gerardjones7881 9 ай бұрын

its a bitch of a job, it took me days because I have awd, this video is fwd. AWD requires removal of the passenger side strut and drive shaft, then the angle gearbox (thats why book labor is 6 hours).

@langedalen8381 9 ай бұрын

One question?? Is the turbo oil cooled or oil and water cooled?? Thinking about putting on a bigger turbo on my volvo s80 2.0 turbo.

@Aleks_Mechanics 9 ай бұрын

Thank you for the question! This turbo is both oil and water cooled, that's correct! Thank you for watching my video, i really appreciate it!😎👍🏼

@Simplydrivennapasonoma 9 ай бұрын

You likely just saved me about $1,200. I’ll spend some of that on tools and dive into my 01 v70 2.4t.

@Aleks_Mechanics 9 ай бұрын

Thank you so much! I hope the replacement goes well if you go for it!😎👍🏼 Thank you for watching my video, im glad you liked it! Work Safe!👍🏼

@dominicspillane4460 9 ай бұрын

The best

@tardeliesmagic 10 ай бұрын

TOP TIP - Pour in some new clean oil into the engine so it'll drip out any old oil sitting on the bottom of the pan 😊

@Lee12238 10 ай бұрын

What size is the clamp you use to put it back on?

@Aleks_Mechanics 9 ай бұрын

Thank you for you'r question I'm not sure what size those clamps i secured the CV-boot with are unfortunately Thank you for watshing my video, i really appreciate it!😎👍🏼

@Romanyc4DrivE 10 ай бұрын

Good video, I will try on weekend do same on my Volvo XC90 😂

@Aleks_Mechanics 10 ай бұрын

Thank you so much, im glad you liked my video! Good luck, hope it goes well, work safe!😎👍🏼

@MarioZenhaRela 10 ай бұрын

This video has a excellent communication quality. The relaxed pace, high visibility and the way you include the wrench sizes naturally in the video is awesome. Thanks and keep posting.

@Aleks_Mechanics 10 ай бұрын

Thank you so much, I'm glad you like the way i make my videos, it means alot to me!😎👍🏼

@SpikesMavic 10 ай бұрын

A bit of Copper slip would not of gone a miss !

@SpikesMavic 10 ай бұрын

Very good, excellent vid 5* to you.

@Aleks_Mechanics 10 ай бұрын

Thank you so much, i really appreciate it!😎👍🏼 Thank you for watching my video!🙏🙏

@iantumulty4053 11 ай бұрын

The best made tutorial I have ever seen , period. Brilliant 👏

@Aleks_Mechanics 11 ай бұрын

Thank you so much, I really appreciate it!🫡🙏

@zachtrimbur2138 Ай бұрын

Fr don’t know how you’re not famous. I’m a euro tech myself and this is better than all data or anything.

@yansensqvanssen2304 11 ай бұрын

the best camera shots in this area I've ever seen.

@Aleks_Mechanics 11 ай бұрын

Thank you so much, i'll always try to put the camera into the best angle possible!😎👌

Ең жақсы KZbin

Пікірлер