Cool headlights 👍, could you please share where did you buy them?
@xox9452 күн бұрын
earned a sub. I'm collecting parts to do a coil install as well as replacing the worn ball joints / control arms. looking forward to that vid soon
@cr.zpirit2 күн бұрын
Do keep in mind, on the CR-Z the outer ball joint is inseparable from the control arm. The whole unit needs to be replaced as one part unfortunately. Hoping to have this video up soon!
@KeebaAfrica2 күн бұрын
bro you're a legend, this on my to do list and with your video now i am going to bump up its urgency . i got this crunch or weird vibration now and then on corners and the steering rack appears 100% so this was my next bet!
@cr.zpirit2 күн бұрын
@@KeebaAfrica definitely check over all the hardware as you go and make sure it's properly tightened, and as I mentioned check your axle boots and ball joints on the control arm for any damage as well. When those get damaged and lose their grease they can also cause noise and instability issues.
@ygggu6767ef2 күн бұрын
Is it really necessary to remove the cover to replace it?
@cr.zpirit2 күн бұрын
@@ygggu6767ef I would strongly recommend it. I did a coilover install on my Fit a couple years ago without doing that, and couldn't fit a key in the center to hold the shock. I spent a long time trying to torque down the top end and ended up rounding off several nuts in the process. It doesn't take much extra time at all. Just some plastic clips and the wiper bolts. For the little effort it makes accessing the top hardware so much easier.
@OlNoName7203 күн бұрын
You are doing a huge service to CR-Z owners. Thank you for taking the time to record all of this footage.
@michaelbernsen40973 күн бұрын
Did the loose struts have any symptoms when driving?
@cr.zpirit3 күн бұрын
Definitely, there was loud clunking during any speed or steering changes and poor feedback when steering in general. No noise and tight handling now!
@Chrisrkooz3 күн бұрын
Nice vid, and the fitment is looking much better too! I would suggest putting some sort of anti-seize on the rear coilover threads, as mine locked up pretty bad and wouldn't free up with conventional methods. I had to take an air hammer to it and destroy it (cosmetically) in the process to be able to adjust the ride height again. Keep up the great content as usual!
@cr.zpirit3 күн бұрын
Thank you, and great suggestion! We may be diving back in to remove one ring from the spring perch for a tiny bit of extra low - great opportunity to add this in while it's apart again.
@BigPimpDaddy22344 күн бұрын
want to lower mine with the same kit probably next month! this is perfect timing! Nice video
@felixbelanger26594 күн бұрын
Any idea what is the PN of the OEM rear reflectors? I'd rather put that than a cheap LED kit 😅
@cr.zpirit4 күн бұрын
For the 2011-2015, the numbers are 33505-SZT-003 and 33555-SZT-003. For the 2016, it's 33505-SZT-901 and 33555-SZT-901.
@jakerambow70308 күн бұрын
What about the tail light that's on the trunk?
@user-ir9pd5hr9l9 күн бұрын
In Russia, we make such spoilers from fiberglass and then just paint them. My orange CR-Z has the same spoiler on it
@TheDarkDemon9310 күн бұрын
Thanks for the work and the video. It looks really good! Could you advise me on purchasing a Noblesse spoiler? I've been looking for one for a long time, and used, it would be a great option... Thank you for your response.
@cr.zpirit10 күн бұрын
I got this from a Japanese auction website, used ones are few and far between so you just need to be watching and waiting.
@A1Garage14 күн бұрын
I m also using manual Zf1 chassis 😊
@KeebaAfrica17 күн бұрын
i AM SO HYPED! stock manual on a cr-z surprised me, and is one of my favourites
@cr.zpirit17 күн бұрын
Surprised me as well, when I bought the car I honestly thought it already had a short shifter installed!
@OlNoName72018 күн бұрын
Have not seen anybody upload a video on how to install the rear reflector LEDs on a CRZ. I assume it's not much different than the ones for other vehicles but it would be nice to see one explicitly for this car.
@MestupgirlАй бұрын
Wow I had no idea my car had all these interior lights lol
@SakibAhsanTamimАй бұрын
Hi "cr.zpirit" - In your channel have some problems, that's why your channel is not much growing. And if you can solve, Your channel will get more engagement like storm. If you want I can tell these problems. Can I tell? Where? Here or in email?
@KeebaAfricaАй бұрын
Personally i like the Mugen spoiler more but this Noblesse is a strong 2nd favourite. Love your content!
@cr.zpirit17 күн бұрын
Thank you! I do appreciate the Mugen, but I feel like I see it on a lot of builds. The Noblesse fits the lines of the car quite well I think, and I just couldn't pass up the auction price when I saw it!
@LordXaeroАй бұрын
Great job man. Looks good.
@nolahahnshouse3389Ай бұрын
About to go home and raise my cr-z up a little bit more.. just a little bit too low for me
@trolling755Ай бұрын
Nice!
@A1GarageАй бұрын
Awesome ❤
@A1GarageАй бұрын
Sir ur content is very informative I also bought same colour of crz in blue ❤
@chanfredrick2012Ай бұрын
May i ask how to change dash meter blue light modified to white please?
@cjewe1z2 ай бұрын
Where did the backseat lights come from? I've never seen them in my CR-Z.
@esoesjeff2 ай бұрын
It’s so nice to see someone working on this car 🙌🏽 I love mines but recently I’m having issues with the a/c system, it seems to happen a lot on hondas, have you planned to make a video check your a/c? Greetings from Guatemala!
@nolahahnshouse33892 ай бұрын
I’m planning on getting a center exhaust diffuser to go with the Remus exhaust for my cr-z in the near future.
@KeebaAfrica2 ай бұрын
this a big W for the CR-Z community!
@sly81082 ай бұрын
Haha thats so cool man
@nolahahnshouse33892 ай бұрын
Bro where can I order one of those crz rear whopper delete plugs you installed on your crz?
@ciancraig30502 ай бұрын
Bad ass
@nolahahnshouse33892 ай бұрын
Just purchased a 2013 manual transmission ex cr-z this past weekend and I can’t wait to start modifying it..lightly
@ethanleibrant1292 ай бұрын
Dude! So amazed at how talented you are in your craft. Can’t wait to see those in person 👀
@ryankassel56912 ай бұрын
Great work!
@FreakyFunTime2 ай бұрын
Totally awesome, but now the 3rd brake light is throwing it off in my opinion lol, any plans on smoking it out or making it clear?
@cr.zpirit2 ай бұрын
We are considering a few different options, I agree it definitely doesn't quite fit in with the rest anymore and we are going to come up with something unique for it eventually 👍
@azzii_x2 ай бұрын
Those are absolutely beautiful mate
@mickpurcell2722 ай бұрын
Amazing job definitely suit the car 👍
@NunezMario2 ай бұрын
Take my money!!!😂😂😂
@andreadrkaos56042 ай бұрын
Ciao ottimo video..la mia crz quando la temperatura del abitacolo supera i 25 gradi ed accendo le luci si accende la ventola e la spia sul cruscotto controllare ima. Cosa puo essere? Grazie
@akiraproject24244 ай бұрын
Looked these up new...wow 1100 each! Hoping to see what you did with yours. Hoping you do an aiming video so I can gauge whether or not to drop the lettuce on these.
@DanielHernandez-et4th5 ай бұрын
Arr these plugs still available gor purchase?
@cr.zpirit5 ай бұрын
All sold out now.
@jerryvidals6155 ай бұрын
Where did you get your headlights?
@josephgzalez6 ай бұрын
Where STL?
@akiraproject24246 ай бұрын
your vids are well made. When I learned about the Final edition JDM headlamps I got so excited until I checked the price lol. My HIDs will have to do for now!
@KingKing-pw5fd7 ай бұрын
Thank you soo much this is exactly what happened with my crz I have buch off lights on the dash after I replaced everything works perfectly thank you again
@nyronpaulino70447 ай бұрын
good contents bro! keep it up! very less cr-z diy in youtube. do a headlight bulb replacement
@reyztec7 ай бұрын
Thanks for the vid man. I just bought some on Yahoo Japan and was looking around if anyone had done it, good to know it's very simple. Can't wait to have my CR-Z stand out. Starting to see more CR-Z's in my town but mine is the only one heavily modified 😅
@g1ucon5 ай бұрын
Hey man! Curious how much did you paid for them?
@Folskyfied7 ай бұрын
how the back door open by itself?! mine doesnt
@AndrewPattullo7 ай бұрын
Car needs stripping and cleaning ! Dusty lookes terrible
@merc7paul8 ай бұрын
I have two 2011 and 2016, looking forward to the end and the journey 🎉