Can the fog light be changed without jacking it up? My partner is attempting it but we dont have a jack as far as i know
@huktuned5 сағат бұрын
@@jog5572 Yh just be fiddlier
@razakrazzle21 сағат бұрын
If you get another key and barrel from another ek, do you have to change ecu?
@huktuned13 сағат бұрын
@@razakrazzle depends if you have aftermarket ecu. On facelift ones you can easily remove the immobiliser chip I have a video on it
@razakrazzle13 сағат бұрын
@huktuned stock ecu and pre facelift
@huktuned12 сағат бұрын
@@razakrazzle pre facelift is trickier. Do you still have original key ?
@razakrazzle12 сағат бұрын
@huktuned yes still have original key, but only this one, Car does not turn over when moving steering
@huktuned5 сағат бұрын
@@razakrazzle that comment doesn’t make sense mate
@Ghetto109Күн бұрын
What are exterior parts can you fit from EK9 to EJ9?
@huktuned13 сағат бұрын
@@Ghetto109 pretty much everything mate
@Ghetto109Күн бұрын
Would it be possible to know if the EK9 Pre face bumpers fit directly onto EJ9? Yes or No? Would you be able to make a video for it to see how it will fit.
@huktuned13 сағат бұрын
@@Ghetto109 Yh they fit mate easy as anything. Two ten mm bolts under it. Few screws and clips
@katep11025 күн бұрын
This is the only video that is correct on KZbin. All the others don't show you how to get the annoying far right screw out which means you have to take the bumper slightly off. So thank you for actually taking the time to make a proper correct easy to follow video! Made me life easier x
@huktuned5 күн бұрын
@@katep1102 was my first time also so just did it as I saw it
@dannyoliver83547 күн бұрын
Yeh replaced barrel 1996 put back on but turns over . How do I imbolize new key please and barrel
@huktuned7 күн бұрын
@@dannyoliver8354 have you still got original key that matches with ecu ?
@dannyoliver83546 күн бұрын
Yes do .but has separate button push sensor key ring. But now does not evan unlock doors either now But separate. Key for ignition and key ring push button for door locks Key just normal
@huktuned6 күн бұрын
@@dannyoliver8354 stuck the original key near the chip reader and try start it now and tell me what happens
@semvisser21416 күн бұрын
u gonna show us the conversion??
@duckieman6917 күн бұрын
Mine got not sure if it's a light or not gonna go check
@vinnyfuller637822 күн бұрын
Have you found a better matching carbon dip?
@huktuned5 күн бұрын
Not yet!
@ignatiusk2684Ай бұрын
Your forgot the rearview mirror sensor in the EJ9.
@huktunedАй бұрын
@@ignatiusk2684 rear view mirror sensor ?
@orthoh0pperАй бұрын
Hey bro I have removed the immobilizer chip on an ek1 1999. Still getting the green key check light after inserting the key do you know what could be the problem? ecu flash possibly?
@huktunedАй бұрын
@@orthoh0pper no start even tho chip removed ?
@tracebraganca8092Ай бұрын
Wasnt the ej turbo B already?
@huktunedАй бұрын
@@tracebraganca8092 Yh my b18 turbo Ek being painted currently. Thats a big spend build tho This is like a budget friendly build sleeper
@toddscarsАй бұрын
Fantastic video. Love the new content too. Keep it up! Suscribed and liked!
@huktunedАй бұрын
@@toddscars cheers mate just tryna transfer all the nerd content from the old forums on KZbin bit more accessible for people
@RantsBantsАй бұрын
Man like Joe!!! Good work fella
@huktunedАй бұрын
@@RantsBants seeing if can knock this out before my Ek gets back from paint
@Tic97xP2 ай бұрын
Great video! Do you know if it is possible to mount the side crash reinforcement from a facelift ej9 on a prefacelift ej9 chassis?
@huktuned2 ай бұрын
@@Tic97xP no mounting holes unfortunately but can get aftermarket braces that run along lower floor bolting into the seat belt holes
@Tic97xP2 ай бұрын
@@huktuned thanks, as i understand this also adds stifness besides crash safety?
@giantgains77772 ай бұрын
you thought of starting a car wash ?
@huktuned2 ай бұрын
@@giantgains7777 haha very good charge them a grand a time
@rafaeldeoliveira55763 ай бұрын
Waiting on the conversion broski
@rafaeldeoliveira55763 ай бұрын
This was some good work
@huktuned3 ай бұрын
@@rafaeldeoliveira5576 honestly it would have been better if I tried harder but for a first time , shows it’s easy enough
@rafaeldeoliveira55763 ай бұрын
@@huktunedit looked great from what I could see
@gmoney13543 ай бұрын
You have any ek9 parts? Looking for a few for mine
@huktuned3 ай бұрын
@@gmoney1354 join the Facebook groups they’re your best bet mate Ek9 owners group. The Huktuned group etc
@gmoney13543 ай бұрын
@@huktuned awesome Thankyou.
@ThisAintARealHuman3 ай бұрын
No useless talk no begging for likes, just a man working on a car. Subbed.
@RantsBants3 ай бұрын
Decent work brother!!! Excellent flip!!! A bag in under a day!!!! Keep it up man
@huktuned3 ай бұрын
Had to move it on before I started building it can’t have another project
@dusterpl60933 ай бұрын
did you seriously had to flip it? 💀💀💀 bro is single handedly ruining the Civic market, like it wasn't ruined enough already
@dusterpl60933 ай бұрын
a rust bucket like this shouldn't cost more than 500
@huktuned3 ай бұрын
I found it , put the work in , took the risk on it having a bad engine If you are willing to risk a grand then go do it I took the risk lucked out and now have supplied it onto someone who doesn’t have to take that risk and can re shell it into there car That’s business If I bought it and engine turned out bad I would have lost all that money
@ThisAintARealHuman3 ай бұрын
Bro you are only 14 why do you even care. If someone doesn't want to pay that much they are free to not buy it.
@izakbartley79853 ай бұрын
looks like a lot of work
@RantsBants3 ай бұрын
Epic work fella!!!! I wana see more of your work… let’s get you to Matt Armstrong level.
@robthomas43024 ай бұрын
Brilliant instruction, fitted mine in less than two hours.
@xil_ef88296 ай бұрын
Is the calibration video allredy posted?
@frankylongs90686 ай бұрын
Ciao complimenti veramente ottimo lavoro..❤ hai il link per comprare questi comportamenti per fare la modifica 😊
@ccproductions48017 ай бұрын
If you do this i recommend you get the arch lining peg hook to make it easier i did it without and took me 40 mins all in and 30 of those minutes were spent trying to remove the pegs and get them back in😂
@brandon2kn7 ай бұрын
Thanks for the feature 1:22 🙂😆
@MrLongshot267 ай бұрын
How do you know if it's the bulb or just a reflector?
@MrLongshot267 ай бұрын
I reckon 5-10 minutes to get the bumper off
@am79507 ай бұрын
hello mate where did u buy the part i need left deflector
@ccproductions48017 ай бұрын
Left reflector i found in the uk at euro car parts seemed to be the only place that had it
@aivarasvaskys16778 ай бұрын
B18 C4 engine
@huktuned8 ай бұрын
yes mate
@MuhammadzainGulzar8 ай бұрын
Is left hand and right hand climate control wiring is same ?
@huktuned8 ай бұрын
I know the little jumper harness that connects double din unit to double din dash loom is same left or right , I wouldn’t imagine dash loom is same tbh
@caisleannalochca14298 ай бұрын
Ej coupe has the thicker side moulding
@xh4t4b3nd38 ай бұрын
you don't send it to me
@jordanseal15279 ай бұрын
do a video on rear lights jdm swap ?
@jordanseal15279 ай бұрын
is there any diffrences between race base shells and normal k9 shells or just interior ?
@huktuned3 ай бұрын
Shells are the same mate except for that race base front thin crash bar
@xil_ef88299 ай бұрын
Y-56 sunlight yellow was only available for the facelift EK9, sadly preface was only limited to championship white, vouge metallic silver and flamenco black
@huktuned9 ай бұрын
Yh that’s a good point I forgot to mention that
@99Lezard999 ай бұрын
does this also work for the euro civic ecus? the british made ma/mb/mc chassis
@huktuned9 ай бұрын
all I can tell you is it works for obd2b Ek Ej , unsure about them unfortunately would need to check ecu code / have a go
@99Lezard999 ай бұрын
@@huktuned ok thanks for the reply anyway 👌
@tracebraganca80923 ай бұрын
I would not imagine that it would be this simple 😅 great video!
@kotjoker90779 ай бұрын
PCD Ek9 5*114,3,. Ej9 4*100, wheels 15"/14" Ek9 heve front and rear strut brace Ek9 have a tinted rear windows, red recaro seats sr3, dark plastic, no rear curtain and titanium knob of course! Oh! Also, ek9 has never been a hatch
@huktuned9 ай бұрын
This video is just about exterior ! check my other videos
@captainsvlog10 ай бұрын
nice one dude, I defo would have got a Dremel out to cut a slot in those but heads though I reckon :)
@huktuned9 ай бұрын
Good call! but requires more tools
@dannyoliver83546 күн бұрын
@@huktuned that part was easy brought new one. Cut down middle clamp slides off
@dannyoliver83546 күн бұрын
@captainsvlog cut clamp bend it slides off .them shear bolts suck . Just put new one in .new key . Maybe need buy another lock sensor burrow push aswell? Reprogram it I don't no but getting flashing green light ...need do something so it takes new Kew and barrel and column
@99Lezard9910 ай бұрын
not sure how it is on ek9 but facelift ej9/ek4/ek3 have 2 side impact bars welded in the doors while prefacelifts only have 1 bar.
@huktuned10 ай бұрын
interesting I will have to have a look cheers !
@99Lezard9910 ай бұрын
@@huktuned thats "german" spec models btw. no idea how uk or jdm cars will be
@danarkle505310 ай бұрын
Thanks so much
@Denersena10 ай бұрын
Can you tell me how to calibrate the needles?
@xil_ef882911 ай бұрын
Great video and exactly the information I always looked for However I managed to fit an ek9 rear seat in my ej9 without any major modifications I'm from Germany so not sure if that makes a difference on the car
@huktuned11 ай бұрын
that’s why this is U.K. spec. but Yh ore facelift is easy to fit facelift more difficult. across the world they did different mountings god knows why
@xil_ef882911 ай бұрын
@@huktuned i agree The video makes more sense with the UK spec in general If you want a full 100% replica the right hand drive is necessary Still thanks for this video as it helped me a lot with this I only faintly heard about and wasn't to sure if it was actually true Especially the seam welding part everyone talks about but never have I ever heard about the actual locations
@huktuned11 ай бұрын
@@xil_ef8829 I am making more ej9 vs ek9 videos so keep an eye out
@xil_ef882911 ай бұрын
@@huktuned you got a sub Keep up the great content
@trickyfandango11 ай бұрын
Manage to change my sons fog after watching this video. It was a great help. Thanks for making it
@huktuned11 ай бұрын
nice well done ! good little cars these
@nfspeedy2 Жыл бұрын
The EK9 pedals have a different height to make heel and toe easier. This EK9 looks pretty neglected 😢 thats a shame for such an icon.
@huktuned Жыл бұрын
I will have to check that that’s interesting used to be caged track car so has seen some action
@zakwrx701 Жыл бұрын
Great info 👍 lil cat makes a cool addition too haha