Where do you store the bag when it is empty ? How many gas fumes do you smell while fishing ?
@truckmarine3 ай бұрын
We put the bladder in the anchor locker. Never had a fume issue or smell. We always burnt the bladder on the way out
@Camh19686 ай бұрын
Hi. How do you setup AP to track the contour line?
@trevorpiper4352 Жыл бұрын
How much does this cost for t-top and seat?
@sirlancair Жыл бұрын
i have it on my 2015 Sportsman 247 mid tower and have experienced bad delamination on the t-top feet and the swim ladder also has it peeling off badly where it screws into the transom. I would be interested to know if it is repairable in situ.
@truckmarine Жыл бұрын
We offer de-rigging and re-rigging service at our shop. Are you one of our customers?
@sirlancair Жыл бұрын
Line-X..I meant..autocorrect
@truckmarine Жыл бұрын
@@sirlancair Thank you for the reply. Since this is a non-standard Line-X Application the process and materials used can vary greatly. What store did you have this done at? Please feel free to reach us at [email protected] or call the shop to discuss (941) 527-1387
@cwill1142 жыл бұрын
Would’ve loved to heard a drag burning it down! Brian does top notch work and amazing customer service! Check them out
@plutonium88792 жыл бұрын
Where’s the fish and what’s up with the stupid music?
@timmann19362 жыл бұрын
about 250000 more
@cwill1142 жыл бұрын
About 250,000 more worth it too. Why not buy the best instead of buying something twice? No mono hull boat will Touch a Freeman
@lauragowe24752 жыл бұрын
This zu ked. No kill shot. Bull shit content 💩
@cali24002 жыл бұрын
Looks great!
@johnschall30132 жыл бұрын
I can’t afford either. Lol….
@subvertedworld3 жыл бұрын
Give me the freeman any day.
@Evan721sxm3 жыл бұрын
What percentage of the trolling motor power is needed on an average wind/ wave for spot lock? 50% or more?
@UrbanFisherman3 жыл бұрын
Great info captain 👍🏾
@homeycheese13 жыл бұрын
thanks for the video, when on the ATL bladders do you run the motors till they quit?
@pr0pman4 жыл бұрын
can you apply line-x on a pontoon deck (on to marine grade plywood) would it work?
@pr0pman4 жыл бұрын
@Brian Londeree About how much should I expect to pay for covering a 20' pontoon? about 160 sqf with color (desert sand) Only the deck (marine grade plywood) I will remove everything but the engine. Thank you.
@JLT34 жыл бұрын
12O GPH
@Whalermansteve844 жыл бұрын
I have a 1966 13 ft whaler that I want the interior in line x. How much would that cost ? I can de-rig it myself and sand it down ..
@minibar71654 жыл бұрын
Nice video and I'm impressed with the holding power! I just pulled the trigger and bought the Rhodan HD GPS Anchor Trolling Motor, 84" for my 32 OffShore, can't wait to have it installed and test it on the water. I do a lot of deep water off-shore fishing in the Gulf, and this will be a game changer for me. Thanks for sharing this video.
@wesleyatkins98564 жыл бұрын
Any results?
@homermcclain76944 жыл бұрын
How about a web link to the ATL fuel bladders
@jamesdonovan50774 жыл бұрын
I have just decided to get the Rhodan for my Boston Whaler Vantage 270 its 29.3 ft overall withTwin 250 Verados i'm running in the gulf and looking forward to picking it up and installing. Hope to have it up an running just after Christmas :)
@dougkanarr42845 жыл бұрын
What you didn’t see in this edited video was the 39’ Nortech flying by both boats going near triple digits
@chuckclark61624 жыл бұрын
No one actually uses a Nortech for fishing though, just as a phallus extension.
@cwill1142 жыл бұрын
Literally no one cares about a Nortech lol
@playgroundplayzz69355 жыл бұрын
Man team fat bottom girls 37 ripps. Ive got a 34 but thats a new level of speed
@smd30555 жыл бұрын
Motors are lose !!!
@gradyk71015 жыл бұрын
you’re not much faster and since the yellowfin was 150hp down if it was equal hp I think the yellowfin would be faster
@bradysmith56044 жыл бұрын
Grady #18 freeman had 300 gallons more of fuel. That’s 2000 pounds
@vandersgarage46822 жыл бұрын
Ummm....wrong. The Freeman had full tanks and the Yellowfin was light on fuel. 2000lb difference with 300 more gallons. Give them the same fuel load and the Freeman still wins. Then do the same run in 3-5 foot seas and see which one comes out on top.
@gradyk71012 жыл бұрын
@@vandersgarage4682 that was 2 years ago why even reply
@vandersgarage46822 жыл бұрын
@@gradyk7101 Because I didn't look at the date it was posted and really couldn't care less if it was 10 years ago. My point still stands. Don't like it? Tough titty said the kitty but the milks still good.
@gradyk71012 жыл бұрын
@@vandersgarage4682 no i’m with it love freeman’s now
@rpsly18735 жыл бұрын
can we see this same run in 3-5 ft seas???
@jbjohnson62282 жыл бұрын
You could but it would all be 25mph,
@owenbearden57695 жыл бұрын
36 invincible with trip 400s would make easy work of both of em
@gradyk71015 жыл бұрын
Camaro Bro obviously it’s a lighter boat with more hp then both the of them
@owenbearden57695 жыл бұрын
Grady #18 same hp and same size as yellowfin, just lighter and better
@gradyk71015 жыл бұрын
Camaro Bro sure
@yessuhyessuh21003 жыл бұрын
Doubt it
@judebarber5 жыл бұрын
Genius setup chief
@vincentbruhl95715 жыл бұрын
Them motors catching hell lol
@rafeone98085 жыл бұрын
With the advancements of cats, why would anyone but a monohull?
@woolfair2 жыл бұрын
Cabin.
@liemh92902 жыл бұрын
$
@rafeone98085 жыл бұрын
10 to 15 mph waves?
@skullhart6 жыл бұрын
Line X used to have a Yellowfin
@cwill1142 жыл бұрын
That should tell you something. Then they went to a 42 freeman. Now they are going to a 43
@jerimahjohnson86986 жыл бұрын
I'll take the freeman
@Pineypowerwpww6 жыл бұрын
What's the typical price range for a standard t top
@Gabucks16 жыл бұрын
Thank you for this video! I have been looking for one on these gps anchors for a while. How does the system perform in a chop? Does it get beat to death riding on the bow? How is the battery life? I have a 27 ft cc and really could use one of these as i fish in 200ft+ but its hard to find reliable info on them!
@trintrinster5 жыл бұрын
I heard you guys are on back order for these products. Is this true & will this thing work on a 32 ft cc regulator?
@tylerjacobs28606 жыл бұрын
What quick connects and valves did you use? Size and brand
@SlipItIn.Fishing3 жыл бұрын
Also interested wondering what size hose and disconnects. Seems to be working, but that hose looks pretty small to feed 2 outboards. Thanks for video.
@tms04253 жыл бұрын
Looking at a 50g ATL for twin Mercury 200 V6 4 strokes, assume it would work the same way plumbed into the offboard filters? No pump needed?
@richardrogers92586 жыл бұрын
is that the 84 inch shaft?
@yomama23817 жыл бұрын
lose the scuba gear
@fishing4fun9037 жыл бұрын
that's pretty cool, you should do a video on showing how to set it up
@lilcutter11007 жыл бұрын
Wheres the warsaw?????
@MusicMath1237 жыл бұрын
Music: Aaron Lewis - Country Boy
@warnerfoster19167 жыл бұрын
Recently, a friend installer a 36 volt, 120# thrust, 84 inch shaft, Rhodan on his 27 foot Sailfish with twin 200 hp Yamaha's. We tested the motor twice and it worked flawless. The first time was in St. Andrews Bay where the bay flows out to the Gulf. Conditions, wind 12 to 15 mph, outgoing tide. The second time was three miles off shore in the Gulf at the Sea Buoy. Conditions, rolling swells 2 to 3 high, wind 10 to 12 mph, current 1.35 mph, wind, current and swells were going in the same directions. The only time the motor would not hold the boat on the spot is when a big swell would force the motor to come out of the water. The motor coming out of the water was my fault because I did not deploy it all the way down. However, the motor would immediately put us back on the spot. Now we are waiting for Red Snapper and Gag Grouper season to open so we can put the Rhodan through its paces.
@FrankLadd7 жыл бұрын
Really nice demonstration, but the water must be a lot different down there. When it is blowing 10 to 15 up hear there are a lot of visible whitecaps. Can you show it working in a stronger blow?
@Bluewatertravler7 жыл бұрын
What speeds are you seeing out of the F37 with the quads?
@swiftusmaximus56512 жыл бұрын
realistically mid 60's maybe upper 60's with light load
@austinquinlivan83042 жыл бұрын
@@swiftusmaximus5651 that isn't even close its in the 70s easily if propped correctly
@cwill1142 жыл бұрын
@@swiftusmaximus5651 yea not even close. My friends 37vh with 350 verados… we hit 80 in the harbor with 6 guys on board.
@swiftusmaximus56512 жыл бұрын
@@austinquinlivan8304 LMAO, we talkin Knots or MPH?
@swiftusmaximus56512 жыл бұрын
@@cwill114 Hmmm? Are we talking Knots or MPH? 70mph =61kt.
@bluewater_11427 жыл бұрын
Are there different colors available for the line-x non skid deck paint ? I really love the look of Yellowfin / Beavertail decks that are grey/blue.
@electrostaticpowdercoating11487 жыл бұрын
Yes, for powder coatings, you have a lot of colors to option. We're manufacturer of powder coating machine: qdzhongbang.en.made-in-china.com/
@markshark73787 жыл бұрын
Can you email me this setup, I would want this system, including the autopilot system to follow that ledge
@smokendt8 жыл бұрын
Do you guys do the de-rigging and re-rigging? I have a 2011 25' Shearwater with a fiberglass T-top (aluminum framing) that I wanted to get Line X Ultra done. Looks like a better process than powered coating.