Sir when I put CMOS jumper at first two pin my pc did not start and fan is off and when I put CMOS jumper my pc start but not open bios.my pc shows that CMOS CLEAR press F1 to boot and enter but I press the button and my keyboard is not working.please help me

THANKS

Why do my PC slows down or load slow when I try load two youtube videos at the same time???

This Is Best Trick To Solve Release Date Checkup Problem This Worked For Me And I Am sharing This Video To More People's kzbin.info/www/bejne/j2LLZIqneL9soas This is a lit

Hmm

*Why are these people disliking the video?*

Good morning sir/mam sorry if i disturb you my name is JohnRey from Philippines and i want to us you something about the problem of my PC or i think its motherboard the problem is when i turn it on the power the power go to ECS elite group black screen setup and they have 2 main choices either bios or main setup but i can't go to that 2 category my keyboard is good or iin running condition and always reset to that situation or that option. Can you help from that problem? Thanks

THANK YOU! Nice one mate! This worked perfectly for me by: (1) Removing and replacing the CMOS battery (I tested it with a battery life tester and I didn't need a new battery). (2) Moving the CMOS jumper back and forth (I waited 4 mins before putting it back in its original position). (3) Booting from a Win startup/repair CD then, when prompted with the option to do so, loading the 'CMOS default settings'.

My computer was showing no display, then I Shaw a troubleshooting video on YT and according I disconnected power and long pressed Cpu power button then computer turned on but it freezes after using sometime, can anyone help me ? WHAT to do ? Plz, I will sub you

Sir my pc is sometimes turn on sometimes it takes 2 days to turn on ... Now I am facing an other problem which stuck at windows logo i don't know what should I do ..I did so many ways to salve that problem ..Ram clean and changing c mouse battery .........It just on after shutdown it won't turn on again ...I really don't know what kind of problem it is ...Plz help me

I am experiencing a strange issue . Some days back I found out that my computer was getting hot and therefore I decided to reapply the thermal paste and replace the stock cooler with cooler master hyper 121 led. I did replace the stock thermal paste ( removed it by 95% Iso propylene alcohol) then applied artic silver 5 compound (pea size method), and finally attached the aftermarket 121 cooler master hyper cooler. Finally checking all things at their place and seated neatly, I booted up the computer , however I did not not got the post beep sound (1 beep) - the CPU fan was running , the GPU fan was running but there was no display on the screen. My motherboard has a built in error code embedded card which showed code 77 error. So, I switched off everything and began to inspect by removing every component one by one , but all in vain , the problem persists. Then after a while , when I was not getting any solution , I reseated every component back again and booted up the computer still no response got code 77. Then I again switched off and tried to again boot up -I did this procedure "on and off" 2 to 3 times - and suddenly out of the blue the computer booted without any error (heard the pleasant 1 post beep sound). Then my computer ran very smooth like no problem occurred at all. Next morning, again the same problem - no boot , no sound , CPU fan running and getting annoying code 77 error . This time I did not opened up the hood however I did switch off then waited for 20 sec. and again boot the computer -got same error - again switched off and boot - got same error, so, I repeated this switch off and boot method for exact 7 times and about ,say, 25 minutes my computer boot without any error, and ran perfectly. I am not getting what actually the issue is. Please please help me to figure out the problem

i have a qosmio x505 gaming laptop. i always run it without the battery to keep the battery good for only when i use it. one day it shut off on me not running any games or powerful programs. i tried to turn it on and it hums every 2 seconds and blinks a fraction of a second every 2 seconds also in harmony with the hum if i hold the power button. the fans nor hdd wouldnt start. i replaced the video card and ram a year before that so i tried putting the old parts back in. of course it didnt fix the problem. also i tried starting the laptop without various parts for trouble shooting. the charger is a 180w 4 pin adapter. what would you suggest i do? no one has an adapter to use to test the charger where i live...and both the charger and motherboard are over 100....

PLEASE HELP ME ! My pc had BSOD problem and I looked for solutions ,,Theres a way to clear bios ... to remove cmos battery and move jumper pins ... I removed battery and also took out the jumper and put it long in clr bios 1&2 pin .... and I also moved the other jumper which has 7 pins .... at first it opens and says bios has been reset something like that then I moved the pin again .... now my pc wont turn on anymore ,only power button light and fan and the yellow green light in the plug near motherboard ............. I have 2 jumper on mobo ,one has 8 and other is 7 .... I both moveed it ...

My laptop charge light turned off. There is nothing happen when i press power button. Will it work If i wait 5 hours ? Please help (Sorry for my english)

I haven't used my HP 2000 in about a month and all I'm getting is a partial start up with black screen and orange/white slow blinking power indicator. Thanks for the great video, I will give this a try.

Hello, I tried to update the bios of my Motherboard from ASUS (bad choice). I tried for windows, but the ASUS program said it failed to identify the EEPROM. At that moment the PC was working, but I had the bad idea to restart, now my computer is in the same situation as yours was, but only the motherboard, processor and psu, but not the beep. I have already done the jumper and battery withdrawal procedures to try to return the motherboard's factory settings. What do you think I should do or the motherboard is dead?

to quickly identify problems...1) look for the light of the motherboard it is in the middle green or yellow.. that has to be lit when powered on..2) look for bulging capacitors..it takes only 1 for not booting at all...look all capacitors small and bigger sizes if they are bulging motherboard is dead..the cap can be replaced unsoded and put a new one and sod it

Need help please !!! i detected who was the problem in my pc thank to your video. it was graphic card . but before happend this i was just plaing a game and my pc just turned of and i know the reason why cause has happend many times , it was from temperature on my graphic card . i open my gpu graphic card and i saw that was not termal paste in there . is that the reason that my graphic card doesnt work or could be something ealse?? i will be really greatful if you help me :)

i have prob with hp starwars eddtion it just blink the power button and not turning on

What I did is took my cpu out and it worked and I'm replacing it because some CPUs are not compatable

im also experiencing the same problem.. i have managed to formatted the pc and all but it cant read my extra ram so i decided to switch the 2x 4gb ram, after turning on its all black screen and wont make it to bios.. so i triet to jumper it but still on black screen.. i have already bought a mother board but after booting and tried to swap the ram again it stills on black screen.. i desperately need ur help sir.. =(

desconecta la batería interna, la bateria externa, el adaptador. Enciende la laptop, apagala, conecta la batería interna, batería externa, adaptador. El problema está resuelto.

i have tried your best result profile but vlc couldn't load the mp4 audio codec

My laptop died today and wouldn't turn back on. I just get this rapidly blinking red LED light next to the power cable so I am trying this. Fingers crossed 🙏🤞

Hii...recently i was working on my pc and then it suddenly powered down automatically with beep error codes...and then after that it never turned on....possibly when i now turn it on it shows the monitors logo and then blank...nothing... I also want to add that when it was in working condition..on every startup it shows cmos checksum error....and due to this i now replaced the cmos battery with the new one...but unfortunately it dosen't turned on...only black screen..plz help..

I forgot about the cmos jumper..lol Even a old tech needs help at times. But at least my son was able to see that I still knew how to troubleshoot. Got his HP up n running.Thanks for your help :)

Hi plz help me..iam literally crying....I think my CPU fañ cable connector pins r slightly bent..Is my whole motherboard garbage now?T_T plz tell dude

Newly built PC, first boot try: power up, LED's on, can hear CPU beeping, after 15 every time PC turns on (no display on monitor either) the pc goes through a turn off turn on cycle. All products are new, have tested the PSU and it works (another PC), any ideas what would be the problem?

My CPU starts automatically without pressing power button in CPU.....doesn't display anything on screen...no display...how to fix it?

what does it mean after spilling water on it ? ... kill me..... my laptop was my lifeèeeee

Hello...When I start my PC it turns on it gives 2 short beeps with a pause and everything works on in CPU but no display comes.3 out of 5 times this happening what I do when it happens that I clean ram and reset and remove and reset power supply from motherboard and it works after trying many times. and what I recently did before this problem occurred is I changed my PSU with used PSU, my earlier one had 24 pins but the new PSU I mean used one has 20 pins so the other 4 pin separately attached somewhere side. plz tell me who is culprit Ram or Psu...coz before changing my PSU everything was working fine but 2 short beeps with a pause and resetting ram and wires solves the prob many times...so I confused what to do? I have no graphic card just the default one which comes assembled PC with 4 GB ram(2 sticks) Intel motherboard and Intel i3 processor running win10...just a simple CPU 5 yr old

Hey there, just wanted to share that if you want to turn off the computer using the power switch, you have to hold it down for a few seconds.

just change the power Supply. Over 50% of the time its the Power supply.

Hey Rodney..... Firstly an awesome job with the video mate....you have put in details to the last mile ..... i tried check each part.... when i removed the RAM and switched - i did nt the single or long beeps, which you get when you switch on the system without the ram or if there is a ram fault. - Is that sign of af aulty RAM ? i checked the SMPS to, the fan seems to be running. I don t have a graphics card - so i'd rule that out. The HD seems to running - rule that out too Did the memory reset option too.. What would you suggest i do next ?

I need help. my computer fans spirit , gpu fans spin. and no beep for about 15 sec then it beeps once then pause for 15 more sec then beeps again a normal beep not short or long. I don't know what to do. any help no display BTW during power on only that strange beep.

Thanks for the info , my friend gave me a HPS laptop with the not turning on issue , he told me it used to work before one day he didn't charge it and after that never turn on again ,the charger works there are no short-circuit or anything of this nature do after watching this video i asume this is the issue since the pc it was never overheated is a shame for HPS to keep making new computers with poor design and durability.

Excellent video mate. you are like a life saver.

can you please reply - i have a problem with my pc. it started yesterday when i wanted to plug my Projector with pc.till that time everything was fine but when i connected projector, the projector screen shows all the white to yellow (screen works perfectly but all the white of screen is yellow) I thought it may be projector problem so i connected the cable to my monitor but the monitor too shown the same problem. i though connection may be loose so i changed the cable (same type but another) still got the same problem. then i took my 2nd monitor but still got the same problem. then i completely formatted my pc and reinstalled the windows but still the same problem. Then i bought new VGA cable shown the same problem. Now i tried every VGA cable ( i have 3 including the new one) to my friends computer. the two old cable gave me the yellow color on his pc but the 3rd one (new one) worked normally. so i concluded that it is neither monitor nor cable problem .... am i true ?

Does the compressor have anything to do with music files only ?

my pc flashed a bunch of blue squares then shut down and now it will not postor display anything on my monitor and wont give beep errors help please

Thanks for the videos, using this pretty much confirmed it was my mobo went bad. Now to see if they'll replace my mobo despite me breaking a pcie clip and the cpu bracket holder screw off...

I have a HP 8440p. It wouldn't turn on, just gave me the orange 8 blink code... I have tried...almost every known method found on google/youtube and I could not by any means fire up the laptop. As it turned out there was only one way to solve my problem. A NEW battery! Thank you for reading my story ;-)

I have 4 sticks of RAM, could all be bad at once? There is no post on any of them when I install them one at a time. But there is the one long and two short when there are no RAM sticks installed. And yes the video card is out so there should be a post regarding that AFTER one RAM is installed.

my android karbon titanium mach six vr screen keeps flickering.how do i fix it ?

what do I do if I got a no video card code when I pulled my video card out

Hey is there a way to test the CPU and heat sink?

just saved my day and my pc thanks

I appreciate the video but I think my motherboard is done for sadly.at least it was a budget board.

Thank you it was amazingly helpful for me today! Saved my time and money! And best of all I am feeling self very expert :D

Rodney, thanks for useful info. Help anyone: I have .MXF files (actually mp4, FullHD 1080x1920, recorded with Pro Sony EX1), and want to re-convert so that my Pinnacle 19 could see the files (for some reasons the Pinnacle do not see from one card, but sees from another card the same recording and the same settings. Question, what VLC settings suppose to be set getting the same quality, what bit rate kb / s, video codec and frame rate?? Thank you very much. Vidas [email protected] Lithuania