If I just listen it sounds like Ryan Reynold who loves snap on tools haha. You have the same thought process I do. I want more snap on, not because I need it but because it’s pretty and looks nice
@Trytec96Ай бұрын
Thanks! Not a bad celebrity to be referred to in the least. haha Can never have too much Snap On
@WadeDevelopmentGroupАй бұрын
you can tighten the flex heads.
@OGjackHАй бұрын
why didnt you disconnect the fuel pump?
@Trytec96Ай бұрын
@OGjackH I disconnected the fuel injectors. No need to disconnect the fuel pump. If you want to get really wild, you can always pull the fuel pump fuse if you're worried. The way I did it, it's just not necessary. At least that's how I've always done it and have never run into any issues
@Saiyanqueen420Ай бұрын
Wow man's had a whole ass shop under that mess 😂 great clean up!
@BB-qn5rjАй бұрын
Why do people try and hide and gate keep what they pay to snap on truck is it shame? All it does it keeps the prices higher for everyone else and protects snap on corporate to continue insane prices
@Trytec96Ай бұрын
So for me personally, I get some pretty great pricing due to knowing the right people. I don't want risk losing said deals haha.
@03JosuefАй бұрын
Need to see those in the tool box 😮💨😮💨
@OneReferralAway2 ай бұрын
Just so you know, all of the sound is only coming out of one channel. You notice it when wearing headphones.
@Trytec962 ай бұрын
@OneReferralAway ya I found out my mic wasn't even on and not sure why my gopro was set up like that either. I'll do better next time haha
@OneReferralAway2 ай бұрын
@@Trytec96 Happens to the best of us. I only noticed it because I was smoking a cigar in the back yard with my head phones on and something didn't see right lol
@Trytec962 ай бұрын
@OneReferralAway haha thanks
@elliotstoolsandprojects2 ай бұрын
Epic Haul 👌🏻
@joshbrown13812 ай бұрын
As someone that has 35 snap on ratchets, I approve his reasoning.
@Trytec962 ай бұрын
Haha we must stick together
@ericantonson52042 ай бұрын
Tool box tour will be required after you put them in their home
@ericantonson52042 ай бұрын
No need to justify how you spend your money. Snap On tools are fantastic.
@greggkahler21032 ай бұрын
Well done, spot on
@tristancarhartt20392 ай бұрын
Be careful. your audio is only on the left side . Good video too, sadly we don't have snapon in Europe
@Trytec962 ай бұрын
@tristancarhartt2039 ya someone else said that too. I'm going to have to check that out next time. Thanks for the heads up!
@gilmansgarage63412 ай бұрын
12 inches is a nice size to have , there's a lot of places you could fit it in 😁..sweet haul , those red drivers in foam are 🔥..well I subscribed to help you push on..👍
@Trytec962 ай бұрын
Thanks! Much appreciated. Loving the screwdriver set
@M4ttj0nes2 ай бұрын
Epic haul, thanks for sharing
@morgangrisby81072 ай бұрын
while snap on might be some of the best out there, i don't think it is worth 5x the price for 1.5x performance.
@Trytec962 ай бұрын
@morgangrisby8107 There are definitly other brands that have stepped up and for a fraction of the cost, I agree. I haven't found a set of screwdrivers that I like more than the Instinct Soft Grip though.
@russellpottenger85842 ай бұрын
While Porsche might be some of the best out there. I don’t think it’s worth 5x the price of a Volkswagen for 1.5 x performance 🤔
@ianloyd63842 ай бұрын
Guess it doesnt matter what anybody else thinks as long as he’s spending his own money tho, no? 🤔
@Trytec962 ай бұрын
@@ianloyd6384 I wish I was spending someone else's money on my tools haha
@33teepee2 ай бұрын
have fun with your new tools. idk why i got this video but good stuff.
@Trytec962 ай бұрын
@@33teepee Snap On knew you were in need some some tools and Christmas is coming up
@andrewsantillan47982 ай бұрын
Yeah I want a snap on ratchet, but i have no reason to. But i do want one so one will probably end up in my tool chest not too far away.
@Trytec962 ай бұрын
@andrewsantillan4798 just the basic T80 3/8 drive chrome ratchet has done me wonders for years
@Imtheeyeti2 ай бұрын
What’s ur weekly payment on the truck after this
@Trytec962 ай бұрын
@Imtheeyeti haha no payment plan here. I try to save up before buying. It's too easy for me to get caught up in the excitement, that if I started a payment plan, it would just increase to levels I'd never be able to pay off haha
@daeman132 ай бұрын
just some video advice, make your mic mono so that it comes through both left and right sides of a stereo sound set up
@Trytec962 ай бұрын
@daeman13 Sure wish I knew how to do that. Haha. I'll figure it out. Thanks!
@Wappapappa1112 ай бұрын
I feel honored to watch this video after 3 years, I have never seen any of your videos before
@Trytec962 ай бұрын
@Wappapappa111 Well thank you for taking the time to watch one now haha
@Silverhawk19832 ай бұрын
Those locking pliers look a lot like they are rebranded Grip-It. They look nice
@robsteal38872 ай бұрын
Probably are. A lot of Snap On tools are made by other companies, Williams makes a lot of their tools. Great tools though, just buy them branded as Williams and save about half the cost.
@Trytec962 ай бұрын
@@Silverhawk1983 ya they could be. I'll have to take a look. I'm curious myself now
@TorqueTestingFinancials2 ай бұрын
@robsteal3887 snap on actually owns Williams
@russellpottenger85842 ай бұрын
Pick up the Malco’s while you still can.
@richharr2 ай бұрын
Those are all really good snap on products, I have most of them and yes that long handle 3/8 flex head is my go to. For aircraft work check out their cusion throat cutters and the combi cutters.
@Trytec962 ай бұрын
I actually don't think I've seen the cushion throat cutters at work and I used to use them all the time in my other job. Thanks for reminding me. I'm gunna get my work to order them. Super nice for lockwire. As for the Combi Pliers, any specific ones you are referring to?
@richharr2 ай бұрын
@Trytec96 CC87ACF for the combi cut. Tell your dealer to get you a catalog, they have like 6 or 7 cusion throats in them.
@Trytec962 ай бұрын
@richharr Just got them to order the cushion cutters 20 minutes ago for all tool boxes haha
@richharr2 ай бұрын
@@Trytec96 Savage move!
@Saiyanqueen4202 ай бұрын
First step is admitting you have a problem hahaha love the easy use of the locking pliers and grey color!
@performanceworld30773 ай бұрын
Thank you! Glad you liked the seats!
@Mnsty.r64 ай бұрын
Recently went down on my R6 and destroyed almost the whole tail. This video saved my life when trying to replace all the stripped threads cracked fairings etc. Cheers
@jandzban87785 ай бұрын
you don't have to disassemble that much at all
@MauriceBorg-b1x5 ай бұрын
1675 Rashad Islands
@Voidhawk0018 ай бұрын
Isnt it easier to take the whole airbox out?
@joeswanson32599 ай бұрын
Beware before u purchase thus stand . I bought the exact stand and it does not work on my yamaha. It would crush my head light assembly. Seller wants me to pay shipping. I don't think so .. venom shame on you . Junk.
@Trytec969 ай бұрын
What Yamaha do you have? Year and model?
@ToyMaestro9 ай бұрын
thank you this was the best and easy instructions straight to the point and the edm music is 🔥 !!! btw you do look and sound like Ryan Renolds 😅.
@Trytec969 ай бұрын
Thanks. Glad it helped. I also get that, surprisingly quite often, about looking like him haha.
@ALACRAN-MOTO10 ай бұрын
Just like pretty all ur comments are saying, great vid! I have a 2013 r6 and a 2008 gsxr 600. Definitely the gsxr for me is easier for me. I hate doing a plug change out on the r6! U Definitely have to have the swivel for 1 and 4. Wish I would have had this video in 2013, I had to learn just by getting in to it. Yup all ur stuff is correct. Ride safe man
@Trytec9610 ай бұрын
Thanks, appreciate that. Glad you enjoyed the video
@RMD992-f2n Жыл бұрын
does icbc need to see your supervisor when u ride to the test? can i just show up by myself?
@Trytec96 Жыл бұрын
They don't need to see your supervisor but it won't look too good if you show up without one and they're already there or if you don't pass and ride away without one haha.
@jerodholbrook389 Жыл бұрын
What happens if you fail?
@Trytec96 Жыл бұрын
Wait a day and book again. You can fail as many times as you want.
@jamesrose8007 Жыл бұрын
Good video.Thanks.
@nikkoabhievlogs8412 Жыл бұрын
Did she passed this MST? I mean for the 25to30 kph then sudden stop or breaking? Thanks
@Trytec96 Жыл бұрын
Yes, she passed
@dlnandrew40ify Жыл бұрын
Mine was 210 across the board too jdm b16a
@Trytec96 Жыл бұрын
Nothing wrong with those numbers. She's a healthy motor right there
@bardenj22 Жыл бұрын
Thanks for the video.
@NOAHCASAS Жыл бұрын
WHEN I PUT IN NEW SPARK PLUGS I LIKE TO GET A NEW LONG LARGE FAST FOOD RESTAURANT STRAW AND IT'S MAYBE OVER KILL BUT I CAN FULLY FEEL FOR HOW SENSITIVE THE PLUG FEELS AND I CAN TWIST IT IN SLOWLY TILL I FEEL IT CATCHES THREAD THEN FINGER TIGHT AND THEN DROP IN MY SOCKET AND RACHET AND HAVE NEVER HAD ANY CROSS THREADING
@miriamvivo4279 Жыл бұрын
Great location for the fuel filter, no so on the honda prelude big pita
@Trytec96 Жыл бұрын
Haha. I used to own a 2001 Prelude
@miriamvivo4279 Жыл бұрын
70 retired .currently driving my 2006 subaru sti. Terrible on fuel
@miriamvivo4279 Жыл бұрын
Just did this on my 98 honda prelude. Having driving and shutting off issues. Got 195, 190, 198, and 199 . All good. Next doing a leakdown test. Then replacing the fuel filter. If isxue remains gonna replce the fuel pump
@Trytec96 Жыл бұрын
Let me know how the leak down check goes. Before you replace the fuel pump, try and get someone to turn power on while you listen to the fuel pump to see if it's getting power and turning on.
@miriamvivo4279 Жыл бұрын
Did that already. Fuel pump working , but louder than usual. Sounds like its straining..will check for fuel pressure at the regulater.
@nikkoabhievlogs8412 Жыл бұрын
Does anybody know any rider in nelson Bc that havefull motorcycle license ? Thanks
@poplarparkfilms Жыл бұрын
Taking mine at the end of the month, I really appreciate this video! How much longer was the test or did it end right after you cut the video? In the manual it says it takes around 15 mins so just curious if the test has possibly changed since this video was shot or if you just didn't film the entire thing? Thanks, any tips would be greatly appreciated !
@Trytec96 Жыл бұрын
Okay so I had to rewatch the video as it's been awhile but everything you see in the video is from start to finish for the riding portion. When she finished the last stop, she was told she passed and that was the end. Now, at the beginning of the test that is not in the video is the instructor will get you to operate all your signals and lights to make sure they work. They will also ask you for your hand signals for turning and braking and they will get you to walk your bike in a straight line. The video takes place right after that point
@poplarparkfilms Жыл бұрын
@@Trytec96 Thanks so much - I really appreciate you taking the time to reply ! I've been practicing a lot lately and this doesn't seem too difficult so I think I'll be good to go by the end of the month. Is the road test pretty straight forward as well?
@Trytec96 Жыл бұрын
@James de Boer one way I found really helped and the way I have taught others and they have been successful with the test, is go to a parking lot with parking stall lines, set up cones or plastic cups at the end of each line for spacing and just continue to slalom between the cones over and over again. Then start slowly moving rhe cones closer and closer and go as slow as you can. You should get to a point where you're moving between the cones at a closer distance than what the exam is so when you do the exam, not only has your clutch, throttle control and balance has gotten better, the cones on the exam will seem really far apart making it seem really easy.
@poplarparkfilms Жыл бұрын
@@Trytec96 Fantastic advice ! I will be sure to do this on the weekend !
@gilnicolas63772 жыл бұрын
can u give a lenght details of frame pls
@Trytec962 жыл бұрын
I would if I still had the vehicle haha.
@diegomurga87822 жыл бұрын
Hey man this has nothing to do with the video but Uh how do you remove that plastic piece that covers the hood hinges
@Trytec962 жыл бұрын
Are you referring to the black protective guard cover that spans the entire width of the hood? If so, if I recall correctly as I don't actually own the vehicle anymore, You have to remove both wiper and then its all just plastic clips you remove and the whole piece should come off. It's been a while so don't quote me haha
@willbill5732 жыл бұрын
Thank you nicely done.
@hayleys11102 жыл бұрын
Thanks bunches. 🙌
@TheCueball122 жыл бұрын
Omg a Honda video with GOOD information to convey knowledge instead of incorrect BS causing wasted time/money. Thank you sir, especially for your bolt sizes
@Trytec962 жыл бұрын
Glad it helped ya buddy
@pauld42272 жыл бұрын
Thanks for this video. I have a 99 Honda Civic DX. When I replace the fuel filter, do I need to bleed the lines?
@Trytec962 жыл бұрын
Nope, at most, it might just take a second or two longer to start the first time after you replace the filter
@pauld42272 жыл бұрын
@@Trytec96 Thank you!
@KKDriver2 жыл бұрын
Yo man imma be doing the same to my hatch soon. Lemme know how it went for you and I’ll do the same🤙🏼
@lycanit2 жыл бұрын
So you still happy with your stands a few years later? Is it still working?
@Trytec962 жыл бұрын
I've had the rear stand now for I'd say 9 years and the triple tree for I think 4 or so and they still work great. Best purchase I've could of made for the price