Yes

If it blocks a galley, your stuffed. Try to flush out with water or compressed air from alternate directions.

@damodoesall6240 Ok thanks if it doesn't work would I have to remove the block cover?

Yes, freshwater will last but not forever. I would not re use them unless they are in very good condition, they just go crumbly and then block the passages inside the head thus blocking cooling water flow.

Yes, there is always the extra one to protect the block.

Pointy curved pliers, for the big bit, small hose taped to a vacuum cleaner nozzle for the crumbs.

@@damodoesall6240 thanks mate .

@@damodoesall6240 Gday mate just got the new motor home and i had tolook at the internal anodes ,well they are nothing like on your engine there a weird little thing held to the bole by a screw which i presume goes into the bolt ,i can see issues coming with this design as it is only a philips head screw got 4 of them saw something that looked like it on ebay and they want 16 dollars each for them and i dont even know if they are the correct ones ,no big rubber gasket just a small oring hmm is yamaha cheapn out?

@@damodoesall6240 Hi mate the anodes on the 40hp are different to yours ,they are really small and have a screw going through the anode into the bolt with a o ring on the bolt to seal it ( can see corossion problems already) ,from megazip schematics it seems these have been used for a long time lucky i didnt buy pencil anodes like yours .

Yeah, I use almost all genuine parts. I have found the Penrite10W-30 marine oil and the Ryco Z436 oil filter to work perfectly as well. Hint, try eBay for massive savings on genuine parts !!

@@damodoesall6240 I wish i had known the ryco number about a week ago just ordered 2 yamaha filters but got them at a good price i use penrite oil in all my vehicles im the penrite poster boy support an australian company , my twostroke my bike and my car have all the greases just bought 2 new cartriges of marine grease for the gun , seen anodes on a genuine site but the air freight is a killer from japan .

I use it about monthly, but every 14 days would keep the colour more even. Any liquid product is always going to be a bit here today and gone tomorrow, as thats the nature of the beast.

Yes, the Kinfe plus is the best, but the rest have been very hard to find in this country after COVID related problems.

@@damodoesall6240 I've only used the Knife Plus, but only once, and I think that I mixed it wrong. Next time I try I'll be mixing 50ml with 3 litres of water to cover 100sqm. Does that sound right to you?

@@TroyDegarnham 50-100 ml per 100 sqm, I use 2 L water per 100 sqm , and that allows for a double coat at 90 degrees apart.

100 hours and 10 years, the previous owner did not use the boat much

It blocks the passage way and your engine could overheat. Best to try and find it and remove it.

There are normally one per cylinder and one extra in the main gallery, easy way is to look for those special clips over the anodes on the side of the motor.

The guy that makes the round ones seems to have stopped. A new guy is among the square ones, after the original guy stopped.. If you want chinese made round nets, crackpots or custom networks sell those as "Bunbury Specials"

@@damodoesall6240 nice one mate, i'll track em down👍👍

Only one. but it was just size.

I would say yes but with great care, the occasional lump is present that may jut up.

Coming soon!

Cheers, its even better now !

Please do!

Thanks

Thats the go!

Trident mowers, google them

Trident mowers

I think so too!

If you are good at welding, you can buy the tines loose from the tine supplier and make one yourself, the postage would be cheaper.

@@damodoesall6240 unfortunately I am the last person in the world you want welding. I wish someone would come up with a similar design here in the states. Anybody want to start a business?

I am trying to get any type in the EU, which apparently never heard of core aeration, lawn leveling or detaching...

@blue jay mine clogs too and it’s soooooo frustrating 😡😡😡😡😡

@@darodes haven’t looked recently but the best design from England was available in the states. The design forces the plugs out automatically. I think it was around $150 but I’m planning on getting one because I’ve added at least 250 to the curse jar dealing with trying to unclog the piece of crap I have

EAsy either way, about 30 minutes when you now how

@@damodoesall6240 ok cheers I’ll buy one off of Lincoln then, thanks for your help mate

Buy it from Trident Lawnmowers

Noted!

Use an 18mm spanner on the two adjusting nuts, there is a set each side.

Glad it was helpful!

Ask Trident Mowers

Coming soon!, have filmed in edit now.

I found the trident better than the other

Usually they are all the same hexagonal shaft, so most blades will fit, double check the size with lincoln, he has a Dynablade copy, but does not advertise it, best to go and see him on a weekend.

@@damodoesall6240 Hi, do your blades fit perfectly on the shaft? or a little slack? The shaft would be 1 inch and the blade 1,140 inch?!

@@anniehensmarinavandervelde3599 They fit perfectly

Really?

Thanks! Will do!

Nein

Yes, sounds great buts surely thats your real hair?