Great video. Quick question. How long would you say your setup process takes from airing up to getting in the water. Mostly I’m interested in knowing how long the airing up process takes. Thanks for your time.
@jonping88 күн бұрын
Thank you, I appreciate it. I will say it's probably 15 minutes. The airing time is about 10 but give another five minutes to make sure everything is setup for the water. I am planning to do another video soon and.illmget you an exact number. It's not too bad once you get used to it. Take the time to set the PaddleSki up while it's inflating.
@lakkchina13 күн бұрын
The pump is 10yd away
@jonping813 күн бұрын
I'm not sure I understand!
@lakkchina13 күн бұрын
@@jonping8 to far away to see what you show in a video
@jonping813 күн бұрын
@@lakkchina gotcha. Thanks for the info.
@anthonyvespia666217 күн бұрын
I love the bixpy batteries, all set up like that. I sold my 1st J2 motor kit to my buddy. I purchased the complete newer PP-768 J2 motor. I kept my smaller spare bixpy battery. I made a DiY bracket on the outside of my wilderness systems crate, for the smaller battery. Never run out of juice now. 💯 😎
@jonping817 күн бұрын
Ah, I love it. Oh yeah, I think both batteries have their places in kayaks and boats, but I love having that larger battery to stay out even longer. It fits perfectly under my Lure 11.5's seat and I don't even notice it after that. I use my PP-77-AP to power my Garmin the majority of the time, but I do have a PP-166 have I used previously.
@TomyTekOutdoors25 күн бұрын
How much run time can you get with that battery?
@jonping825 күн бұрын
With the PP-768 at full speed you can go about 2 hours. At trollin speeds you can get close to 24 hours+ just depending on which speed you are going.
@TomyTekOutdoors25 күн бұрын
@@jonping8I was referring to the run time with your Fishfinder.
@jonping825 күн бұрын
@TomyTekOutdoors 🤦♂️ dang, sorry about that. I checked this from my phone and mixed up what I was looking at. You probably won't get more than 8 hours on it but I can use mine roughly 6-8 hours depending on my settings. Brightness and the type of scanning you are doing affects it. I have two of these batteries so I get an entire day on them. I like these because I can use them more than just a 12v battery. I carry them when I travel and camp. It makes it really easy to charge devices having both the 12v and 5v charging capabilities.
@robertmartinez376926 күн бұрын
How did you connect your rudder cables to the bracket and are you using the 8 ball to maneuver
@jonping824 күн бұрын
Funny enough, I actually use two weight slide clips. I take off the plastic piece that slides up your fishing line and then I use two small washers and connect the beavertail bolts to the clips. It makes it easy to take the rudder line on and off. I hope that makes some sense.
@user-ktm890rider26 күн бұрын
I’ve been checking this one out do you know if the seams are glued or welded? 2 other units that just came out this year is the ISLE FlyWater and The NewPort NS 130 those both look like they’re well constructed 😎🍻
@jonping823 күн бұрын
Looks glued. I saw both of those at iCast this year and they are both well made for sure. The Flywater is going to be a great paddling/motoring inflatable. It packs down super small too.
@user-ktm890rider26 күн бұрын
Are the seams welded or glued on the paddle ski ?
@jonping823 күн бұрын
I really want to say they are glued. It all looks glued and from what I've seen from others that's true.
@anthonyvespia666227 күн бұрын
That's a cool older kayak. I have the J2 PP-768 as well. I actually run it on my AP.-120. So I don't always have to use the Minnkota.45lb thrust. You should know "Marty Zoffenger" He DIY'd the K--1 as a bow mounted trolling motor. And he ran I believe a 2.5 or 4hp outboard on the stern, on one of his kayak builds. 😎 🎣
@jonping827 күн бұрын
That's is awesome. I love watching Marty's videos. It's amazing how easy it is to get sucked in. He does some really cool things. I've done that same thing on my SeaEagle PaddleSki but I just haven't gotten around to recording it all. I want to change a few things up. Enjoy your J-2, I still have a J-2 and it is working flawlessly.
@anthonyvespia666227 күн бұрын
@jonping8 He's extremely talented. That 4hp outboard Coleman motor, he added to a Pelican Catch 100, is one of my favorites. The design of the transom, the sliding, and swivel seat blew my mind. And he didn't plan anything out. I enjoy all the Bixpy mods, you're always doing. keep them coming my friend. 😎
@harold072327 күн бұрын
8020? Yo mean 2020 aluminum extrusions?
@jonping827 күн бұрын
80/20 is right. You can make all kinds of stuff with it. 8020.net/shop?gad_source=1&gclid=Cj0KCQjwh7K1BhCZARIsAKOrVqEgpckb9wbvfRDmdiyK2ER9GN3c2yJA_1Lo3HbC-ByL5QK3suibNnkaAl6aEALw_wcB
@harold0723Ай бұрын
Do you have the short shaft or the long? I'm looking to buy a gas motor for my paddleski.
@jonping8Ай бұрын
SeaEagle recommends the 15" short shaft for the PaddleSki. That is what I have on mine. The gas motor makes this platform a blast to use. It's great getting out and going further. Enjoy!
@jessepingilley6703Ай бұрын
What kayak is that?🤔
@jonping8Ай бұрын
Hey man it's the Thunderbolt color Lure 11.5
@jessepingilley6703Ай бұрын
@@jonping8 ah I gotcha 😊 when did you scoop that up??
@lakkchinaАй бұрын
I will add some extra carbon fiber layers on the tubes to get more rigidity
@jonping8Ай бұрын
I agree that adding a few more layers of something like that can help protect your investment. It does well but depending on where you fish or use the PaddleSki, that couldn't hurt.
@TomyTekOutdoorsАй бұрын
The Versa rudder is pretty awesome. It makes it easy to install a Bixpy on virtually anything. I just put one on my Hobie Lynx and it works well.
@jonping8Ай бұрын
That's awesome. I love mine and the Versa rudder is definitely a step up from the previous generations. Enjoy!
@kiplambel4052Ай бұрын
Wish I had seen this before buying the skeg mount! I like it for what it is, but fishing a shoreline would be easier with the transom mount, not to mention maneuverability!
@jonping8Ай бұрын
Yes I think both have their strengths but the transom mount is the better of the two options for me. It's just easier to mount and unmount, clean, and work with when on the water.
@kenblair8268Ай бұрын
Thanks for sharing this install. You were very thorough wih clear instructions. It always goes much better with a little help from a trusted assistant.
@jonping8Ай бұрын
Thanks, I appreciate it!
@RMPCOOL2 ай бұрын
soo cool... what motor are you using?
@jonping82 ай бұрын
I am using the Bixpy J-1 in this video. It works great on here as it is really light.
@MuahMan2 ай бұрын
Where is your Bixby motor? In place of where the peddle would be? NVM, just saw it at 5:40.
@jonping82 ай бұрын
I love having it back there, you get so much more control than in the center with the Beaver Tail.
@MuahMan2 ай бұрын
@@jonping8 Ahhh, good to know. I was leaning towards the center!
@jonping82 ай бұрын
@@MuahMan don't get me wrong, I've been in several lure 11.5, 10s, and the lure ii with the center pod and it's good but I like being able to pull the cord up and the motor is out of the way. In the river, the rudder option is the way to go. You won't have to worry too much about hitting rocks with it either as much as you would with the .motor sitting under the pod.
@NghiaPham-xi5so2 ай бұрын
How fast are you able to go with the two of you? Also, do you leave your transom on when packing it up? Thanks
@jonping82 ай бұрын
Honestly, I tried to go back and look at some logs of how fast we were going and I couldn't find any definite. I would say that we were probably at least 10 MPH or so. Sea Eagle says that with one person and a 5HP motor you can expect 16 MPH is optimal conditions, but I haven't seen that just yet, but I will try it again soon. With both of us and how much we weigh and all of our gear, I felt that the speeds we were going were adequate. At times it did feel pretty fast for the conditions. I have a lot of room in my truck, so to save space I always take the transom off. I have a Boonedox T-Bone extender and I put the PaddleSki in the truck and on that. When I get back home or to the place I am staying, I am able to deflate and take the transom off. I know a decent amount of people keep it on, but given the room I have, I always take it off.
@NghiaPham-xi5so2 ай бұрын
@@jonping8 When i first put my paddle ski together, it was a pain to put it on since it was hard to put it in between those black holders cause it wasn't stretched enough. Does it get easier after taking it on and off? Did you notice if it was hard putting it on the first time? Thanks
@jonping82 ай бұрын
I will say that I don't feel that it gets that much easier, but I have found if you do let the boat sit in the sun some then it does make it more pliable. Outside of doing that, right before I put the transom on, I try to pull the pieces apart and quickly slip the transom on. That seems to help me out some, but I wouldn't say it's a great advantage.
@NghiaPham-xi5so2 ай бұрын
@@jonping8 Do you also take off that cross bar that is on the front of the boat as well? Thanks
@jonping82 ай бұрын
In order to fold it completely flat like I do, I do take off the front yoke. For those who don't do it, I believe they just roll the entire boat up. To save room I always take all parts of the boat off to pack it up completely.
@300hiker2 ай бұрын
Even looking at a Lire myself. Did you feel like it was too much for a smaller river?
@jonping82 ай бұрын
The kayak by itself is fairly heavy so I would say it depends on how shallow it is. I actually like my 11.5 in the river, but this kayak is heavier and a little harder to steer, but I would say it depends on how shallow it gets.
@300hiker2 ай бұрын
@@jonping8 Thanks! I live close to the Susquehanna in PA and it’s generally about 4-5 feet unless you hit a deeper pool. But the current isn’t usually too bad at that height.
@jonping82 ай бұрын
@@300hiker ah that sounds like it would be great for that.
@300hiker2 ай бұрын
@@jonping8 plus we have some smaller lakes it would be perfect for as well!
@jonping82 ай бұрын
@@300hiker awesome. I live at the lake and I have the over drive with mine. Even though my son has his own kayak, we can always fish out there together in the lure ii. It has a ton of room for sure.
@juanmilla4292 ай бұрын
Nice! where did you get the registration holder upfront?
@jonping82 ай бұрын
Thanks, I actually made that out of a corrugated sign. Like a for sale sign and I just cut it in half.
@juanmilla4292 ай бұрын
Thanks!
@perfectleveladventurefishi6193 ай бұрын
nice
@jonping83 ай бұрын
Thanks
@777cretbo3 ай бұрын
You still liking it? How is it with small waves 1' or wind on a small lake?
@jonping83 ай бұрын
I still love it. It's such a rigid board that I don't really feel that the waves bother it too much. I have been on the board with two people in fairly rough water and felt safe the whole time. The wind does tend to blow it around some though. I am assuming due to how light it is that is just the nature of having an inflatable. It is perfect for small lakes though. I use the Bixpy motor on mine and that really helps with manueverability.
@777cretbo3 ай бұрын
@@jonping8 Thank you for This reply
@perfectleveladventurefishi6193 ай бұрын
nice
@jonping83 ай бұрын
Thanks
@heathenfirewoodservice20213 ай бұрын
So I just bought a feelfree lure 13.5 with the pedal drive and the motor kit. It was a full package that my local shop was selling. I’ve tried the pedals out a bit and I’m not really comfortable with the pedal motion( sort of a strange way to pedal circular motion). I have the motor for it just waiting on the battery to come in. This is a pretty sweet upgrade idea that I may do. Do you like this style over the rear mount or the motor style that feelfree makes. Thanks man.
@jonping83 ай бұрын
That sounds awesome! The pod setup has its pros and cons. I love the placement of the motor in the pod as it's super easy to get to. It does get noisy if the pod is hollow but I used to put sponges or some type of sound dampening in the pod. If you want to use the pod for a transducer then of course that's a no go. The rear mounted motor using the universal rudder from Bixpy definitely gives the most control and response. If you fish any rivers the rear mount is the better option as well. I've gravitated more to the rear mount nowadays. Good luck with your motor setup and tight lines 🎣
@heathenfirewoodservice20213 ай бұрын
@@jonping8 thank you for the info.
@classicarcadeamusementpark42423 ай бұрын
Looking at your graphic before clicking on the video "Boat? Kayak? Skiff?" Boat? Yes. Kayak? No Skiff? Maybe This distinction I think is rather important. The Paddleski has been around for more than 15 years. Maybe 20. As the name originally implied....the "Paddleski" design was pretty good for.....well.....paddling. The design change from the 435ps to the current 437ps has been a huge downgrade for the.....paddling portion of it (it's name sake). While the 437ps has made many improvements as...a boat, it's no where near as good as a paddling boat as the old model. So much so that Sea Eagle who originally classified the Paddleski as a kayak, no longer classifies the 437ps as a kayak. The "Kayak" ability of the Paddleski is one of the main reasons I loved the Paddleski design so much. As the 435ps is no longer available, this leaves a huge void to me. The idea of the Paddleski to me was....it was a kayak, it was a motor boat, and it could be a sail boat. I have both models. The 437ps for those that mainly want to use it as a boat has made improvements. There is a little more room for fishing gear (I don't fish), it can handle twice as fast of a motor at 6HP, stand & cast drop-stitch floor, and other improvements. But if it's a kayak people are mainly looking for that could take a half way decent motor, the old model was a better design for doubling as that. But the 437ps is still fantastic for.....what it is. I loved my 435ps, I bought one as a spare as they are no longer available for when mine wears out (15 years old, greatly over used), and it's my favorite boat in the world as I love kayaking, but wanted something that could handle beyond a trolling motor and use a real motor (Are there even ANY other other kayaks that can do this? Not that I've found) Both the older model & new model can be used as a sailboat. You can paddle the....Paddleski 437ps, but your almost required to have the motor installed just in case you needed it if your on a large body of water such as out on the ocean. If the wind kicks up enough, or currents were strong, I wouldn't be capable of paddling back. And I'm a pretty experienced kayaker, in reasonable physical shape. Your also not going to want to paddle the 437ps against any kind of wind for several miles, especially paddling alone. I've made my findings well known, and have hoped Sea Eagle would bring back the 435ps for those of us that want.....something to mostly paddle that can take beyond a trolling motor with all the other great Paddleski design benefits. Many people that bought the 435ps didn't even buy a motor for it and used it only as a kayak. The 437ps is wider, and larger tubes, so therefore a significant difference in the amount of effort needed to paddle it. If your just going to only paddle the 437ps, you better own a motor or be sure it's going to be very calm conditions, or you have a short paddle back. You'll have sore arms quickly if your buying it to use mainly as a kayak. It's really intended to be motored and paddled short distances in calm conditions such as into hard to get to fishing spots, or paddling going with the wind or current, in shallow water areas, etc. But don't get me wrong, the 437ps is a fantastic boat for.....what it was designed to do. And it's design was not for the same intentions as the original model.
@jonping83 ай бұрын
Oh you hit it right on the head. I completely agree. I wouldn't want to paddle the 437ps too many places. My small Bixpy electric motor was great for main propulsion, but it doesn't stack up at all with the Honda 5HP. It is going to make a great trolling motor though. I am planning to complete the breakin process for the motor and take it out to the East Coast and get some fishing in. I will try to record my adventures out there.
@classicarcadeamusementpark42423 ай бұрын
@@jonping8 The Bixpy would be fine on smaller lakes if your not in a rush to get around. Most of the lakes under 5 miles from me are 350 acres that I frequently visit and a Bixpy would certainly get you around, but fairly slowly. At Webster Lake about 12 miles away it's 1,442 acres, so a stronger motor would be preferred. But out on the bay and the large lakes in NH, ME & VT you really need something stronger in many areas of those lakes that are thousands of acres, and to deal with winds & currents on the ocean. My Torqeedo 1003 is adequate for most of that if I stay with in a 10 mile range or less and is equal to a 3HP, the max I can use on my 435ps. I hope to some day get a 5HP gas outboard for my 437ps, but it is not practical for me to do that currently as a small car owner without adding a hitch to store the motor outside the car, and until I get a shed to safely store gasoline at my house. Nor would say a Honda 5HP fit in my trunk with the 437ps. But it would be a huge upgrade when it's practical for sure, allow more adventurous long distance trips out on the water. Two people on a very calm day could paddle the 437ps a mile or two, but it would be a lot more work than any known kayak. And doing it alone, I'd say a shorter distance unless your a real athlete. If someone wanted to do that often, I'd suggest buying longer paddles than the included AB30. Maybe try the AB40's as the included paddles feel way too short to me. I had to adjust my paddling technique for it to even work. Also, the 437ps tends to want to spin as you paddle as it has no skegs and larger tubes than the 435ps. Again, adjusting the paddling technique gets around this and you get used to it, but it's performance is nothing like say an inflatable kayak, unlike the 435ps. This gives excellent reasons for Sea Eagle to bring back the 435ps as I've suggested countless times. Maybe add 4 or 5 air chambers for safety and some other improvements along the way. The problem for me is, if both my 435ps wear out or fail for some reason, there is no kayak on the market that performs anything like it that will accept a 3HP motor and sail rig. And since I love mine and use it so often, I can't bare the thought of loosing these abilities. I love my Razorlite for purely paddling in calm conditions, but for a single boat there is nothing similar to the 435ps that does it all really.
@omarelgardaoui25513 ай бұрын
Howa Price IS it
@jonping83 ай бұрын
It ranges depending on what you are wanting to add to the package, but it starts at $1299.
@robertlazenko30154 ай бұрын
H, I wanted to say thank's for the great install BIXBY DYI for Feel Free Pod adapter. I was wondering what you used to mount your fish finder to the pod? I have a Garmin 5" and was gping to store a 10 ah battery inside the pod and run the transducer to another place. My question is does the motor cause any distrubance to the fishfinder? Or make it shake.? Thanks
@jonping84 ай бұрын
Thank you so much, I appreciate it. I used the YakAttack mighty mount and the depth finder mount that YakAttack makes for this unit. I can send the link if needed. The motor should not cause any interference to the unit in the configuration you are looking at. Depending on where you mount your transducer, the motor may cause some disturbance (water disturbance) on the screen. When I would turn my Bixpy on, I would see the water being pushed from the Bixpy on my screen. That's just due to my placement of the transducer off the side of my kayak and having side scan. You shouldn't have any issues though with what you are trying to do.
@robertlazenko30154 ай бұрын
Yes please send the link
@jonping84 ай бұрын
This is what I used for my 7 inch Garmin: www.yakattack.us/rectangular-fish-finder-mount-with-track-mounted-locknload-mounting-system/ I also used the following mount to attach it to the pod: www.yakattack.us/mightymount-ii-with-fullback/ I then utilized the switchblade for my transducer: www.yakattack.us/switchblade-transducer-deployment-arm/
@classicarcadeamusementpark42424 ай бұрын
That's a serious upgrade over the Bixpy (trolling motor). I'd like to have a Honda 5HP. Ownership would require having a trailer hitch welded to the back of my sedan as that won't fit in the trunk along with any of my Paddleski's. Plus I wouldn't want to smell the gas fumes in the car. You have a pickup truck, so it's totally different. I'd also need to get a shed to store gasoline and a gas motor, which I don't have presently. I think my Torqeedo would be my best option most of the time anyway, but I'd really like the range of gasoline, and the speed of a 5HP motor would be a huge upgrade. There are places an hour away or more that I'd really like to have something like that. Most of the time, it's the average sized lakes around here and the Torqeedo is plenty, although plenty of boats with big motors around. Out on the ocean, or really large lakes 3 hours away it would be wonderful to have a 5HP. The people I go boating rarely would want to wait for it to all be setup though or torn down and fit back into a little car and get it to all fit. In a trunk, you could roll it up quickly. My 435ps is certainly faster to put away than my 437ps, and I think that would matter unless I'm alone. And If I need the speed or range or gas, I'd be more likely to travel that far with someone, and I almost have to beg people to go boating. It's not something they are as excited about as me.
@jonping84 ай бұрын
It is definitely an awesome upgrade for sure. I completely understand the storage concerns. I didn't have too many places to store mine at first either, if I wanted to have a gas motor. Being at the lake, it just makes sense to utilize the gas motor a lot more than the Bixpy. I truly want to bring this setup to the beach and that is when I will get the most use out of it. I want to continue to breakin period and explore more of my local lake. The PaddleSki goes where not many other boats can and I love the fact that it can easily be put in the truck and transported. My son will love getting out with me on it and we are looking forward to that the most. I'll record more of my time on this boat coming up.
@KayakFishing444 ай бұрын
Great video! Just got my K-1 and Versa rudder. Game changer!
@jonping84 ай бұрын
Thanks, That's awesome. I absolutely love mine. Enjoy!
@TruthInspector4 ай бұрын
Can you just attach the motor or is there a battery somewhere
@jonping84 ай бұрын
This particular motor you'll need to use one of their proprietary batteries. They have several different sizes as well.
@TheDarkHorse9494 ай бұрын
But you have zero pedal drive control on a hobie with rudder while fishing and gaining position.
@jonping84 ай бұрын
Yes, certain kayaks are going to offer different pros and cons. I can't use my pedal drive in my FeelFree Kayak if I am using the pod mount, but I can use the pedal drive with the rudder option. However, I have to use the hand steering option and forgo the foot steer option. For me, the best option is rudder mounted Bixpy and foot controls. I can still gain and maintain control with my feet and fish relatively hands free.
@Jo-gp8wg4 ай бұрын
Which rudder system and pedals is that?
@jonping84 ай бұрын
It is the Bixpy foot steering kit (AC-FTS-1002) You could go bixpy.com/jpingilley and find it. Let me know if you can't.
@Coleman_Jax5444 ай бұрын
What kind of kit is compatible with this kayak going to buy one off someone for 500$ From what I’ve been finding the kit for the mokan v2 cost 280$
@jonping84 ай бұрын
Are you looking to put a motor on it or are you just looking to put a rudder setup on this kayak?
@thexdoairondealdough49395 ай бұрын
Hey! Where did you get that rudder bushing? I can’t find any and don’t know what size to get could you help or send a link? And is it necessary
@jonping85 ай бұрын
Your best option is going to be getting in contact with FeelFree support and they can send you one. They don't have it listed on the website for purchase. It normally comes with the beaver tail rudder kit. I am working on a new video for the Moken 10 Lite V2 and I don't have a bushing in that one. The hole seems slightly smaller than my lure and it doesn't have as much play in it. I don't think I'll use a bushing on that one.
@thexdoairondealdough49395 ай бұрын
@@jonping8 thank you so much for replying. I appreciate it. I ended up putting some heat shrink on the pin and now there’s little play. Maybe that could help you too.
@jonping85 ай бұрын
Oh yeah that'll work too. I've done that before. Of course I've tried electrical tape in the past as well in a pinch. You should be good though until you can get a bushing. Enjoy!
@Smylzncries5 ай бұрын
I have the 435 it’s the older model there are pros n cons to the older one but it’s cleaner with less attachments. I like all the bells n whistles tho
@jonping85 ай бұрын
I have heard that from several others as well. I like the large platform of the 437, but I have heard from others that the 435 just performed a lot better and was simple to use. Many would love to see it come back. I haven't seen one in person yet or tried it out.
@classicarcadeamusementpark42423 ай бұрын
I have both models, and after just talking about the differences, just noticed your post. The 435ps was aimed at the kayaking market, and it's paddling ability being one of the more important things about it. The 437ps is aimed at the fishing motor boat market, and while it's similar in many ways as the 435ps, not when it comes to paddling it, the 435ps was much better for that. But the 437ps is an improved motor boat which can go twice as fast with up to 6HP motor, more room for fishing gear, stand & cast ability, some safety improvements, and some other improvements. But it does not double as a kayak. Yes, you can paddle it, but at much greater effort, and if your going against a strong wind or tide, some of us may not be able to paddle it back, where as with the 435ps, most of us could at least generally do it, even if we had a couple miles to go...if we had to. The 437ps is commonly used with a Honda 5HP and you can go on some serious boating trips with and take a great distance (see KZbin). The 435ps is more for shorter distances, up to a 3HP motor (still way stronger than a trolling motor), and offers a kayak with some of the advantages of a motor boat. The 435ps also fits easier in a small car, packs up faster, and sets up a little faster.
@jessepingilley67035 ай бұрын
😮
@classicarcadeamusementpark42425 ай бұрын
By the way, I use both the included swivel seats and the inflatable deluxe seats with my Paddleski 437ps as you do. The included swivel seats are more comfortable......to some people. My wife is one of those people. I'm also told if you spend the entire day on the water, the swivel seats tend to be more comfortable. My boating adventures are usually 1.5 - 3 hours typically. What I like about the inflatable seats is I can fit them in the trunk of my sedan, where as the swivel seats have to go in my back seat and take up space. Also heavier to carry down to the water if I'm not using EZ-cart which I use depending on how far the water is from the car. I'm personally fine with either seat. If I'm on a multi-day trip or were to leave the boat in my car, I'd use the inflatable seats.
@jonping85 ай бұрын
I completely agree. I love the swivel seats, but they do take up a great deal of room and are indeed heavier. There will be instances where I will probably utilize the two swivel seats more, but for now with the kids being younger, I'll just put them on the inflatable seat ha. The inflatable seats can be adjusted too depending on how much air you use in them. The weather is starting to warm up and I am ready to get back out there on the PaddleSki.
@robertobarragan17335 ай бұрын
Sweet Build! How has the foam core 3" pipe held up over these past 4 years? Any visible cracks?
@jonping85 ай бұрын
Thanks, I am sorry for the delay. I loved the trailer and I would probably still be using it. I sold it and went to a utility style trailer since it offers a little more from the standpoint of using it for different things. It was a solid trailer though.
@audioeeze83965 ай бұрын
Per your instructions, I finally got the J2 installed on my beaver tail. Took it out yesterday for the first test run and everything went perfectly. I couldn't wipe the grin off my face. It's still pretty cold here in Ky so I was only out for a couple hours. I only weigh 160lbs. and packed lightly, but still was reaching 5.5 mph on top speed. Thanks again for your video! Happy Yakin!
@jonping85 ай бұрын
That is awesome to hear. I am glad that it all worked out for you. The Beaver Tail is a great rudder and even if you don't want the motor on it at times, the rudder is still going to function just fine. It is still cold here in VA too, but I will be out there soon. I have some new videos that I am wanting to put out there. I love the top speed you got. Take care.
@audioeeze83965 ай бұрын
@@jonping8 Looking forward to the new video's.
@binky11355 ай бұрын
Can I do this with a moken 12.5?
@jonping85 ай бұрын
Absolutely! the only difference in the 12.5 is going to be the removable pod and the front hatch portion. Everything else is going to be pretty much the same. I had a 12.5 that was setup similarly and I loved it.
@RobbKidwill5 ай бұрын
Thanks for the video. I picked up a barely used 11.5 and the K1 is mounted on the pod, and the large battery was in the front hatch. On my initial trip I had about an inch of water at the front scuppers, obviously riding too low. I'm moving the battery to be back today. I'll try it behind the seat but I'm worried about stability. I'm not very mechanically inclined. If I decide to move the K1 from the pod to the beavertail, do you think I can do this modification without removing it from the kayak? I'm afraid I will screw something up if I try removing it for the install.
@jonping85 ай бұрын
I normally have my PP-768 battery either under my seat or in the very back of the kayak. It is too heavy for the front hatch, which you found that out. the Lure 11.5 is stable and wide enough that you shouldn't have to worry too much about stability (of course it really depends on your skill level) You can probably keep the rudder installed, but I found that it was easier to take it off completely. It isn't too bad at all to take it off and re-add it if you wanted to. The tension on the spring inside the rudder is going to make it a little harder to do.
@audioeeze83965 ай бұрын
I installed the J2 on my Mokin 10 v2 and took it out for the first time yesterday. I weigh 160 lbs. and was reaching 5.5 mph with a headwind. Love my new setup. Boy does this change everything.
@binky11355 ай бұрын
Is this something you can do with a moken 12.5?
@audioeeze83965 ай бұрын
@@binky1135 Yes absolutely. I installed a Beavertail rudder system first, and then mounted the Bixpy on the Beavertail. So you would need to install a rudder system of some type first. Bixpy has a rudder system as well, but I had already ordered the other one.
@jonping85 ай бұрын
Absolutely! the only difference in the 12.5 is going to be the removable pod and the front hatch portion. Everything else is going to be pretty much the same. I had a 12.5 that was setup similarly and I loved it. I use the FeelFree rudder kit( toe controls), but Bixpy has the pedal option and hand steer as well.
@halhamilton41135 ай бұрын
You're George Santos dude!
@jonping85 ай бұрын
Now that's a first 😂
@davidjohoson83975 ай бұрын
I've been following your channel for about 6 months now and when you posted that short video of your new feelfree lure 11.5 midnight bolt color it sold me.. I initially wanted to buy feelfree lure 11.5 but I saw that the 13.5 was the same price so I found a new 13.5 midnight bolt end up driving two and a half hours one way and bought it.. I'm going to buy a Newport NK300 for my 13.5 I need your help I'm on the fence with this decision.. What steering do you prefer? The foot pedals or the eight ball steering..? Thank you in advance ✌️
@jonping85 ай бұрын
Oh that sounds awesome. I love the Midnight Bolt color. I still have my 11.5 and I am still rigging it up. Personally, I feel that the NK300 is going to have a lot more torque than other motors on the market and I will always say that foot steering is better in that case. I have used my Bixpy motor on a lot of different kayaks and I always tend to prefer the foot steering over the hand steering especially when fishing in the river.
@RobbKidwill5 ай бұрын
I would like to move my K1 Bixpy to the back like that, but offset like yours. I do not want to mess with my rudder or upgrade it. What YakGadget items are you using to have it offset to the right?
@jonping85 ай бұрын
You will need three things. Start with the YakGaget plate that has the four hole pattern for the FeelFree Lure. From there, just buy the power pole adapter from Bixpy, and lastly you will need their pole steering arm. If you need the links just let me know.
@davidjohoson83975 ай бұрын
Do you still have this tri plate..? If you do would you be you willing to sell it..? I can't find one anywhere..😢
@jonping85 ай бұрын
I don't have it anymore. I sold it. You may be able to reach out to YakGadget directly and they may be able to make you one. I know they were planning to make them at one time, but I never saw any more of them.Sorry about that.
@davidjohoson83976 ай бұрын
What is the name of your Garmin sonar rack and where did you get it? Thanks!
@jonping86 ай бұрын
That is all 80/20 aluminum from 8020.net and Yakattack parts. There are other companies that make things similar, but this setup was just done by me purchasing some parts and putting it all together.
@Raytheon657 ай бұрын
Bravo is an excellent air pump, but my question is about the choice of battery. I've read that a small 12v 7Ah lead or LiFePo4 battery is sufficient. Can you say something about this.
@jonping87 ай бұрын
Honestly, I definitely agree. I have not tested with a 7AH to see how many full inflates that you can get, but it is definitely possible and should not be an issue. I might be able to find one fairly easily and try it out.
@Raytheon657 ай бұрын
@@jonping8 Thanks for the answer. I'm waiting for the arrival of a LiFePo4 12v 10Ah battery from Lachy, which I bought on Amazon. It's small and light, and fits perfectly in the Bravo bag. I hope it works.
@davidjohoson83977 ай бұрын
I was just wondering how much you weigh in with your boat weight and all the gear what is your top speed using with the Bixpy..? And on your new feelfree lure 10 V2 midnight bolt are you running 2 Bixpys motors?
@jonping87 ай бұрын
It's all good. I am about 185 and I am not sure of all of the gear. If I were to guess, it is probably another 50lbs at the most. I can normally get about 3.5mph on the different FF kayaks I have had in the past. The Midnight bolt one is a 11.5. I love my Lure 10, but for standing I just felt that the 11.5 provided more room for me to get around. A little more storage space as well. I am only running one Bixpy on it as tournaments only allow one right now. I do have the bigger Pro battery from Bixpy that will go under my seat when it is in the high position.
@davidjohoson83977 ай бұрын
Your kayak setup is so badass!!! I just ordered that same Feelfree Lure 11.5 V2 I love that midnight bolt color. Can you give me your letter showing motor setup information please.. Thanks
@jonping87 ай бұрын
Thanks, I appreciate it. I had the Lure 10 V2 in Green Flash at one time, but I had to get this thing in that Midnight bolt. It is such an awesome color. What do you need on the motor setup? I've rigged this kayak several different ways so far.
@davidjohoson83977 ай бұрын
@@jonping8 Sorry.. I realize that after I posted this you have the feelfree 11.5 V2 overdrive.. when are you going to post a video about your new rig and your setup I just want to know everything about your setup I think you have the right idea from what I've been watching from a lot of your videos..
@jonping87 ай бұрын
Thanks, I appreciate it. It is no problem at all. I am planning to work on a video soon of my new setup. I am working on which type of nav lights I want right now. I have used Yak Power lights before, but I am really looking into the Guardian Angel Lights right now. Hopefully after I decide that and get something installed I'll post a new video of it.