What do you call the black piece that the 3 bulbs sit in...how do I replace that black piece as the light doesn't work but the bulb is fine
@UncleAir10 күн бұрын
Need to do mine now. This video is a lifesaver
@marksickmiller10 күн бұрын
@@UncleAir It's so easy! Let me know if you have questions
@Keisha_Jenkins12 күн бұрын
Thank you so much! I was just pulled over for my break light being out and I didn't want to go to a mechanic and have them charge me for something I can do myself. ❤
@lucymoorman21 күн бұрын
Thank you so much for making this easy for me while my husband was down
@sheilablackburn9714Ай бұрын
Thank you🙂
@hugosanchezmarquez23Ай бұрын
Sol nos pasa a los hrandes jugadores.
@PaytonMoore-ye1ngАй бұрын
What’s the difference between this one and the adc2011 cable?
@kevinmcguire38302 ай бұрын
thanks for showing where the filter was. it was so much easier going underneath tho. that same void you showed where you went from the top, there's a way to reach underneath where that void is and just twist it off. I'm not seeing any reason to go from above and some of these comments about taking the bumper off etc are just crazy. Jeep wouldn't do that. Anyway, thanks
@marksickmiller2 ай бұрын
I found it easier to get from the top, but I have boney arms.
@lard18922 ай бұрын
Two Jeeps in the family ....OH Sh*t
@TruckFan5422 ай бұрын
These are Tomra T-90 reverse vending machines (RVM’s) Very reliable, hardly ever break, and run very fast.
@rahulmuppidi27522 ай бұрын
Thanks for the video and your Great efforts
@kenbarker31713 ай бұрын
Very well organized, comprehensive, and right to the point video. Thank You Mark
@yogendrapandey67363 ай бұрын
He was just shifting weight nothing special still
@nickk.64694 ай бұрын
Should you happen to know what size bolts are needed to replace the ones for the T20?
@chippalko55925 ай бұрын
This video helped a lot. Thanks
@peterhnelosub8865 ай бұрын
Can you keep this plugged in?
@jupiterrain85635 ай бұрын
After all this time I’m still laughing at this joke. I was just telling someone about it today. Classic.
@jimthumerzs23016 ай бұрын
But how does one disconnect the circuit board from the wiring harness? I can't find any push clips on the connector.
@marksickmiller5 ай бұрын
Hi, you don't need to disconnect the wiring harness in order to change the light bulbs.
@TheDarksider15Ай бұрын
Hey Mark do you know how to properly remove the taillight circuit board I need to replace it because one of my bulbs burnt out and melted the circuit board housing. I'd appreciate the response great video by the way.@@marksickmiller
@SuperJsmooth3036 ай бұрын
Just tore mine yesterday I'm hoping it's a light tear and I can avoid surgery really want to get back to competitive basketball again but.. depressing. It's gonna be a long road
@rosensalle6 ай бұрын
How much did it hurt when it happened on a scale from 1 to 10?
@SuperJsmooth3036 ай бұрын
@@rosensalle surprisingly not painful at all, probably less painful than a sprained ankle but now its bruised like if you broke a bone
@JamesWagner-vv9iz7 ай бұрын
cado?
@johncanete83177 ай бұрын
This is very informative and helpful. Thanks for posting this.
@user-yv2gb1fi7f9 ай бұрын
10 mm socket a t20 star bit
@dpthablazer9 ай бұрын
I was in gym thought someone hit me with the ball when I tore mine 🤦🏾♂️
@jroche269 ай бұрын
Great video. Thanks! You can use the same cable for immo key programming
@rz-hi8ou10 ай бұрын
what is the dongle that you plugged into the osb end of the 12x8 adaptor.
@marksickmiller10 ай бұрын
That is the Veepeak OBDCheck BLE OBD2 Bluetooth Scanner Auto OBD II. It reads/writes to the ECU
@rz-hi8ou10 ай бұрын
just to confirm after plugging the red 12+8;pig tail into security gateway connectors the other end gets plugged into the obd cable connector of my scanner
@marksickmiller10 ай бұрын
Yep that's correct
@user-zv8qy8fc7n10 ай бұрын
Needed to hear this clip this morning! Cheers me up every time! I am temporarily bedridden and this helped my spirits so much. Drs. name yesterday was Nick, so I had to see this! Thank you Greg for making me laugh!
@andreapaganomusic82610 ай бұрын
Yo thanks man took me five minutes your tutorial was amazing I just got a little bit lost when I had to put it back but I figured out .. very simple Thanks !!🎉
@tomwalker38910 ай бұрын
Good.
@yolaa2310 ай бұрын
Thank you!!!!
@marksickmiller10 ай бұрын
You're welcome!
@iamKelvinJ11 ай бұрын
Great video
@user-ed4ty8bv7z Жыл бұрын
Will this work for programming a key fob as well?
@marksickmiller11 ай бұрын
I'm not sure. I don't see any options for that in the system, but again I don't know.
@user-id2zk3rz6n Жыл бұрын
Lol “they take the oil and God knows what they do with it” It’s crazy how bad the world is but it’s even crazier how normal the un-normal is
@KeniBey Жыл бұрын
Thank you for getting straight to point and making this so easy to do that even I can do it.
@marksickmiller Жыл бұрын
You're welcome!
@maskeddrummer Жыл бұрын
Thank. you for the video! I will try to do it myself, but I have a question (that might be silly, but I have to ask - hopefully someone will answer): can I put the monkey wrench and lift the car so I can get a better access to the parts, or if I do it the oil will not drain like in the video? Thank you in advance.
@marksickmiller Жыл бұрын
Hi, lifting the vehicle (safely) is just fine. As long as it's level or the front is higher than the back, the oil will drain.
@maskeddrummer Жыл бұрын
Thank you!
@iyoutome Жыл бұрын
Thanks brother, really simple and straight forward...
@1INSOLENTDOBERMAN Жыл бұрын
Did you unplug those plugs 🔌 from a black box ? Also since it was on the right side , when you pulled that carpet cover down from just below the glove compartment, was there a little white colored arrow pointed upwards? My 2018 Ram 1500 Big Horn has that. I ordered the bypass cables for my XHorse Key Tool Max Plus & am now looking for that black box. Couldn’t find it on the left side. I am praying it’s not behind the radio because I really don’t want to take all that out.
@angeldyc Жыл бұрын
Thanks a lot man ❤
@24Wicked601 Жыл бұрын
You’re the best! Thank you so much! Just changed my brake light without having to ask my dad or mechanic! So appreciated!
@MechInfantry2AD Жыл бұрын
This is why I love KZbin. You saved me 125 for a full synthetic oil change by doing it myself. Many thanks.
@marksickmiller Жыл бұрын
You're welcome!
@paulgee8113 Жыл бұрын
My wife's got a four door black jeep . I got a 2007 2 door . Love wranglers
@cbag0805 Жыл бұрын
great video, thanks for the help!
@Erscbarthold Жыл бұрын
I knew someone who apparently had to take the passenger tire off everytime they had to do an oil change. Don't remember the make/model of it. I just remember it being a pain in the ass looking (i watched, but never done it)
@Kern_Media Жыл бұрын
great video! went to my local autozone sadly they had no chucky cheese coins
@marksickmiller Жыл бұрын
lol glad you found the video useful!
@bryanspencer6818 Жыл бұрын
I've changed the balb but it doesn't eliminate could it be the socket the balbe goes into?
@jeepercreepers54 Жыл бұрын
Flopped.
@DrWonderEyes Жыл бұрын
This is some Apple type crap where the dealer doesn't allow the regular guy to work on his own vehicle.
@marksickmiller Жыл бұрын
Exactly.
@hardwork8794 Жыл бұрын
Glad I found this. TY 4 video
@marksickmiller Жыл бұрын
You're welcome!
@circuitboard283 Жыл бұрын
Will this work on 2020 jeep grand Cherokee??
@marksickmiller Жыл бұрын
I haven't tried it, but probably.
@alexpeltek93144 ай бұрын
It's behind the Display, but first you need to take off the climate panel..