nfg_coyote

Пікірлер

@ronnieboyd1419 11 күн бұрын

Great job with the video order my Quick Change kit from Shrader Performance have the confidence to tackle my belt myself now thanks to you.

@CHAOS_MUSTANG 3 күн бұрын

I got the bolt and washer from Ace Hardware 3/8-16x1.50 grade 8 bolt and a 3/8 washer

@sergiomerigo8607 24 күн бұрын

Keep us updated man

@sbonamo Ай бұрын

You should never throw around your new brake pads as the material is quite brittle. The last thing you need is a chipped or cracked brake pad being installed for thousands of miles of use (pressure and heat).

@nickcontreras2455 Ай бұрын

i was confused why mine wasn’t coming off as ez as yours after taking the 2 14mm bolts off the back and it took me 5 min to realize my ebrake was on🤦🏻‍♂️

@prodbyrhudeboi 2 ай бұрын

Hey my man whats the size of that bolt thats from the shrader co . Im thinking of goig to home depot and just get the bolts

@CHAOS_MUSTANG 3 күн бұрын

3/8-16 x1.50 grade 8 bolt

@302xMav 2 ай бұрын

This helped a ton for my pad swap on my Bullitt, thanks a bunch 💪

@michaelhowell2355 2 ай бұрын

I couldn't get the piston to screw in far enough to get back over the new pads. I was trying to use the cheap block tool, though. Do you need to apply pressure as you screw it in?

@richardstell8099 3 ай бұрын

Thank you sir ! 😀

@vicrefalo3273 3 ай бұрын

Hi there, why didn't you apply lube grease to the end's of the pads and in the bracket clips? Or did i miss that part.

@Silentdott 5 ай бұрын

Did you use anything in the back of the pulley? Or just the Shrader bolt and washer?

@nickl8830 10 ай бұрын

Good stuff man thx for making this. One question what was the OEM tork spec for the caliper bolts, when you remounted the rear?

@Jmag9452 11 ай бұрын

Hi and What's the pulley on the far left connected to?

@CHAOS_MUSTANG 3 күн бұрын

To the bracket itself

@IAMREIKI Жыл бұрын

Thanks

@JoseManuel-pv6xi Жыл бұрын

Is it safe to drive w out splash cover

@jagermain4658 Жыл бұрын

yeah i been driving without mine for a couple months

@CaptianFlan Жыл бұрын

One thing, when you compress the piston on the caliper, you need to make sure the two v-groves on the piston are aligned straight up and down. There is a nipple on the back of the brake pad that has to ride in that grove.

@stewart-D 10 ай бұрын

I’m just doing mine now and I noticed that as well , what will happen if the pin on the is not in the pad groove . The piston won’t turn out as the pads wear ?

@ballstoyou33 Жыл бұрын

Ayyy that special tool !!! For the brakes loll I tried to compress them and it wasn’t working so I’m guessing it has to turn ! To compress

@IAMREIKI Жыл бұрын

10 4

@ProfeAdventures Жыл бұрын

Yeah, they twist in

@03svtbooost 2 жыл бұрын

What catback?

@nfg_coyote4615 2 жыл бұрын

Roush

@tiffanypulido8474 2 жыл бұрын

This is so helpful! Thank you!

@qwicxs 2 жыл бұрын

Yep! There goes my apprehension of doing it myself ty sir.

@mrrmsfucker146 2 жыл бұрын

Those retainers are there to save your brakes life!

@ej9236 2 жыл бұрын

In reply to the retainers I also just installed these brakes and wondered where those clips go .I know they weren't on when I removed the old brakes. Where do these smaller retainers go I can't find any video on it ?

@Juan.two.three45 2 жыл бұрын

This is by far the best video I’ve seen. I’m just learning how to work on cars and had no idea how to take off my bumper. Thank you man!

@nfg_coyote4615 2 жыл бұрын

Thank you Juan! I really appreciate it, glad it helped. I sold the car, but if you have questions let me know!

@4AllTheGamefreaks 2 жыл бұрын

How do you remove turn signal harness so quick

@nfg_coyote4615 2 жыл бұрын

Just a little push pin connector..push the tab and pull

@kg0311 2 жыл бұрын

They twist in.. not compress

@nfg_coyote4615 2 жыл бұрын

Correct

@Baggedyote 3 жыл бұрын

if you do some pov drives i promise the video will sky rocket in views

@thefitnesslife4988 3 жыл бұрын

Takes 5mins to do without the fender liner and a power ratchet.

@nfg_coyote4615 3 жыл бұрын

Yes it does!

@squidwerd1981 3 жыл бұрын

way too short of a video

@3rddude 3 жыл бұрын

Do you have a check engine light came on after header exhaust installed ?

@nfg_coyote4615 3 жыл бұрын

@kennethproshek6197 Жыл бұрын

Can you put them on without a tune, I have a 2019 gt

@whyyougottaknow7677 3 жыл бұрын

Beautiful color bro

@nfg_coyote4615 3 жыл бұрын

Thank you!!

@ShelbyCorGT500 3 жыл бұрын

No cats 🐱

@ramblerfiveoh2834 3 жыл бұрын

Finally, a Paxton/Vortech belt change video. Much appreciated! Going to order the Shrader Performance bolt as it seems worth it.

@nfg_coyote4615 3 жыл бұрын

No problem man! Glad you learned from it. I’m not the smartest guy out here, just wanna spread what knowledge i have!

@PayForYourGas 3 жыл бұрын

How are you liking this Paxton setup? Anything you wish you’d done differently? This kit is a serious consideration, I just can’t decide if I want gradual centri power or the PD hit.

@nfg_coyote4615 3 жыл бұрын

I like it. Had issues but now they’re taken care of. With the Paxton you’re “limited” to the 3.33 pulley. You can go smaller but you’re severely over spinning the blower. If you wanna make big boy power, go turbo or big whipple. If you want a very quick daily-able car I’d go Paxton. I kind of pride myself knowing i can drive an hour to the drag strip, run 9s all day, and drive home with a full interior

@PayForYourGas 3 жыл бұрын

@@nfg_coyote4615 Thanks for the response. Yeah I'd stick with the 3.6 until I could afford a fuel system and then POSSIBLY drop to a 3.48, but it seems like even the 3.6 makes good enough sauce on E85. What kind of issues were you having?

@nfg_coyote4615 3 жыл бұрын

@@PayForYourGas I’ve had to have the head unit rebuilt twice in less than 7,000 miles. I wasn’t happy. But now i think I’m okay. Made some pulls with a fast gtr and Ol girl did great lol

@nfg_coyote4615 3 жыл бұрын

@@Adrian_5.0 nothing i did to it

@glleboy2233 3 жыл бұрын

Do u have a ngauge ?

@nfg_coyote4615 3 жыл бұрын

Yes

@glleboy2233 3 жыл бұрын

@@nfg_coyote4615 did u get in from Lund ? Or offline

@nfg_coyote4615 3 жыл бұрын

@@glleboy2233 i got it from lethal performance... 2 years ago though. Ngauge is discontinued now sadly

@glleboy2233 3 жыл бұрын

@@nfg_coyote4615 yup Ik very unfortunate trying to find one.

@nfg_coyote4615 3 жыл бұрын

@@glleboy2233 best bet is Facebook. But even then lund can’t unlock all of them. Only Lund ones that haven’t been converted or something along those lines. Best bet is just get the rtd