Flushing it is a quick fix but a temporary one. Hours of flushing it till it ran clean and mine didn't even make it through the winter before it started losing heat again. Ram heater cores are complete junk and need to be replaced.
@LS_Dusty5 күн бұрын
Man don’t tell me that.. Really? What did you end up doing to fix it? Replacing the heater core?
@1braincellwhm5 күн бұрын
@LS_Dusty I've not done a heater core replacement since it's either too costly to bring into a shop and too time consuming for myself. This is also basically my last winter with this truck since my driving habits no longer require diesel and do it no favors either. I bought a kit to flush and agitate it with air. Luckily I was in a shop and had access to hot water which helped. I flushed it for about 4 hrs until it finally ran clean. Worked like new for a couple months before it started to taper off again. This winter I again, have little to no heat on the coldest days (below 0). I've looked into it quite a bit and there's just something wrong with the heater cores that causes this build up. It builds up again but the worst part is that even if you flush it, you still run the risk of this stuff cycling out of the heater core and getting into more of the system. It's a notorious issue with ram and eventually requires a heat core replacement, anything other than oem.
@williamhsteele7 күн бұрын
Saweet!
@Sryofcrv110 күн бұрын
Love your videos man, thanks for the education. I'm turbo LS swapping my 71 C10 this winter and I'm gonna rely on some of your information for sure.
@Sryofcrv110 күн бұрын
Sorry dude, fix her up and she'll be golden.
@v8tergt65312 күн бұрын
9:01 what did you end up doing with that Oil cap to make it fit?
@aaronmorse916014 күн бұрын
5 inch straight pipe and delete it will be way better h and s mini maxx will make good power
@OGpainster18 күн бұрын
What turbo and waste gate sizes are you running with
@LS_Dusty15 күн бұрын
Vsr44
@v8tergt65321 күн бұрын
How did you install the oil drain?
@LS_Dusty15 күн бұрын
I use to run it to the front cover but now I have it going to the pan. I show it in the ring gapped video
@v8tergt65315 күн бұрын
@ thanks, I removed my pan yesterday and put one bung on the front and one on top of the oil sensor . Going to use one or the other and just cap it so when I decide which one to use I have it done and dont need to go thru that shit show again ( dropping the diff and removing the steering idle bar to get access, cleaning cleaning and cleaning everything and putting new gaskets on everything while at it) lol
@Epf6.725 күн бұрын
What kind of screen for your stereo you have ??
@HotelVictorAlphaCharlie8 күн бұрын
I was wondering the same thing, my 16 is lacking apple car play, sucks to be corded all the time
@juanvela222925 күн бұрын
Good work man👊💪
@Shenaniganin26 күн бұрын
Thanks dude I'm doing all this to mine rn
@uSeLeSsTipsFL26 күн бұрын
Order the same kit the v4 my question is how did you run the drain
@LS_Dusty26 күн бұрын
I ran it to the front cover. If you watch my recent video of the 6.0 ring gap. You will see how the oil return is setup
@cmlilfry27 күн бұрын
What muffler shop you went too I live in Virginia and looking for a real good muffler shop ?
@MrNismopro27 күн бұрын
What radio did you install.
@251suzuki28 күн бұрын
How is the cold side fitment around the headlights and with grill installed ? Thanks
@alecaagaardАй бұрын
Man... Can't believe you didn't swap the parts from dusty to that Tahoe and sell it whole.
@LS_DustyАй бұрын
Hard pass on a Tahoe.
@angelrojas2823Ай бұрын
What overflow is on dusty
@LS_Dusty28 күн бұрын
Huron speed overflow tank
@RyanLovejoy87Ай бұрын
I love ur truck man i have a 2008 chevy silverado 1500 i wanna put turbo in it ect
@edwardboyer7102Ай бұрын
Shidd great video keep doin what you doin this is educational
@TimRichmond-n3fАй бұрын
Smooth Driving ...Sweet
@JoeyMontaltoАй бұрын
Donor car is nice! She will be back on the road soon with a plant job.
@coleslacy9680Ай бұрын
If you need that section of cab I have a parts cab in Richmond can cut out
@phillip-cl8bkАй бұрын
man i hate that! keep ya head up you get it back right
@robertmontalvo597Ай бұрын
Thats actually not that bad pretty easy fix
@jamiebelcher703Ай бұрын
Where did you get your boost controller at. Please send the link
@theLastHuffАй бұрын
Twin 😢
@Jammog123Ай бұрын
Im cat guy but damn those peters sound sweet.
@jwilli850Ай бұрын
That’s a nice trailer bro 👍🏾
@jamesweitzel1488Ай бұрын
Black boy acting like he white.
@christianmartinez9501Ай бұрын
Just paint the washer black
@juanvela2229Ай бұрын
Sounding sweet!
@nickking256Ай бұрын
Keep up the good work
@CrazyOutdoorZ2 ай бұрын
Hey man I have a question I just did the 4l80 swap on my 06silverado I know the second vss plugs into the back sensor but where do I put the other side with the pins???
@alanbagel22042 ай бұрын
Dig the content man glad your back
@LS_Dusty2 ай бұрын
I appreciate you! thanks for sticking around. ill promise to keep the content coming
@miatakhalifa2 ай бұрын
Which Gen 78/75 is this?
@LS_Dusty2 ай бұрын
Next gen billet 78/75 with OCD works t51r mod
@jeremyfilip41902 ай бұрын
He said himself, not alot of those no prep guys ever run 1/4mi. Also the cars are not set up for it. They just changed rear gear and sent it and it tore the shoots off. Tell me your car is fast without saying your car is fast 😂
@alecaagaard2 ай бұрын
Your overall success, or lack thereof, is exactly why my 05 got a build 6.0 with ring gap, gen 4 internals, and summit pro LS pistons from the start. So many people running SBE bragging on the internet but they are the exception not the rule. Mines been taking a season of no prep racing at 15psi on E and its doing really well.
@Spoolinsierra2 ай бұрын
We’ve got the exact same setup but mines a 5.3
@richardtraver76272 ай бұрын
How you like that radio big dawg ? Is it the one off Amazon if so what gigabyte and ram speed model did you get
@LS_Dusty2 ай бұрын
It’s the same as Amazon but i bought it off eBay for $150 i think. It was laggy at first but works great after it’s updated. Here’s the link boss www.ebay.com/itm/355020072738?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=paj8nanlswg&sssrc=4429486&ssuid=vlu1jww-tlg&var=&widget_ver=artemis&media=COPY
@bigdaddylee20112 ай бұрын
vs7875 with t51r mod?? turbo sounds insane
@LS_Dusty2 ай бұрын
Yup billet vs7875 with OCD works t51r mod. Sounds nasty
@bigdaddylee20112 ай бұрын
I like the new setup! Like you said it works for me. I'm the same way
@alanbagel22042 ай бұрын
You gotta kick out some new content man your channel is awesome
@LS_Dusty2 ай бұрын
Thanks for watching! I've got some stuff in the works. Video dropped today and I’ll have some more coming later this week
@CrazyOutdoorZ2 ай бұрын
Sound amazing man nice job I’m following this build for my 4.8
@Nnbs_0072 ай бұрын
Do you have the part number?
@SergioGarcia-lu8rr3 ай бұрын
What’s your instagram bro
@skycowboy_73914 ай бұрын
How many times did he actually “get it” in this video?
@OhMar12104 ай бұрын
Thanks for the “how to” 💪🏼
@Makl20004 ай бұрын
I really don't notice that much of a difference to warrant permanently modifying the turbo over just the S&B intake. Now, to pair this with Stainless Diesel's 5 Blade turbine... that might do something
@alscompleteoutdoor90914 ай бұрын
I would install a inline sensor on the out from the trans cooler line...your not getting a accurate temp...you would be surprised how much less that electric sensor is reading then the actual fluid temp leaving the trans...mine will say 160 on the ecm and its 180 fluid temp coming out of the trans...