Thank you for the video. My clear brush cover does not remove but after a long soak, some of the gunk/hair released.

Thank you for this! I just bought one from a friend so I wanted to clean it before I use it!

Great video, thank you!!

How do you take out that white part in the dirty water tank

Wand doesn’t vacuum up liquids. Help!

I’ll tell ya. I probably would not have cleaned it just rinsing the top piece but you make it so simple thanks. Just have one question the vacuum piece that plastic piece on top of the clear piece. How does that come off? All the best Andrew

Very helpful. I have an older machine, took off the nozzle and the O ring washer was brittle and broke. I hope I can get a replacement. At least I can get the rest of the machine cleaned. Thanks.

Good video! Unfortunately, I have the older model where the plastic sl doesn’t pop off the “scrubber!” It is super hard to clean!

IF YOUR CLEAR PIECE DOES NOT COME OFF OF THE VACUUM HEAD: In another comment I found that Part number 160-0055 from Bissell has the little button that makes this piece removable. Apparently even if it's listed as not compatible, it has been confirmed to fit on the green 1400B model. Just ordered it for myself so hoping for the best. Really poor design choice in the current iteration.

Great video. I borrowed one and the clear plastic cap does not appear to come off to clean the head on this one. It is not mine, maybe an older version. I don't want to break it. This was very helpful in me returning it clean. Thank you. From USA

Super helpful thank you!! What’s “Dead All”? I rewound the video a few times and I’m still not sure I got that right. But it’s something you’d normally put in the sink full of water that you didn’t this time.

(I wish you had a big funnel.). How to clean and thoroughly dry the hose? Seems yuck could form inside. Great video and appreciate the approach.

Seems like it's better to get the actual green one because it comes with a cleaning attachment

Your accent is lovley

THANK YOU! THIS WAS THE MOST HELPFUL VIDEO!!

I’m in America and that plastic part on the head won’t pop off for cleaning!! It’s so irritating! There’s no way to really thoroughly clean it.

Hi there! Thank you for this great video! Even though it is a few years old now it showed me how to clean my Bissell pet vacuum here in the U.S.! Kudos to you!!

So insanely helpful…so much grunge and yuck in my machine…I’m going to try this….thanks for making this video and for being so thorough!!

Oh shit! Your head comes off into two pieces! The clear part on mine has no button and is glued on. It's super hard to clean

I can’t thank you enough. My poor machine looked like a wicked and nasty cesspool. As of today it’s spotless. Kudos!

It’s odd I never even thought of running hot clear water through the machine. I must have been thinking about electrocution, but I’m.not submerging the whole machine 😂. If it can suck up a pint of dog pee, it can do the same with clear water. Nowhere in the instruction manual is it mentioned. Only how to clean the removable brush.

Perfection! Now, I have the Bissel 20037, and I always rinse out the tank, but cannot wait to start soaking it in dishwasher soap - mine might take overnight, but I don’t want to dry rot the flap or plug that’s attached to the tank. Why they don’t provide us with a brush to get all up in there is a mystery.

The head of my nozzle does not come apart it’s the worse to try and clean

VERY helpful, after all these years.

How do you rent out your machine? Great video too!!!

You are a freakin’ genius! - The sink bit. :-) Thank you! My guess is- and it’s not a diss - is you are someone who pays attention to cleanliness and order. I’m not. (Horder/ grot). But you are a champ. Exactly the video I needed to see.

Coming back again for a refresher on how to clean it and I realized I only used hot water on the first part, cleaning out the inside of it. You listed a product to add to the water to sanitize it, but I'm not sure what you said (probably because it's not a US product and it's unfamiliar to me). The transcript says "debt all" but that doesn't seem right either. I'd like to look up the product so I can get some sort of equivalent if possible!

Great video! Thanks for clarifying the green indicator thing. I was trying to put one of these car seats into a vehicle that doesn't have isofix and couldn't work out what the heck the instructions were talking about. Your video made it clear and simple. 👏🏻👏🏻👏🏻

Far too much time spent watching you run water to get hot water and such ... edit that out 13 minutes ! Completely unnecessary

Still coming back and finding this helpful! Thank you again so much for posting these kinds of videos.

What if the clear plastic part doesn’t come off the brush head?? How can we clean that. I’ve tried everything and my dog hair is stuck on the sides :(

EXCELLENT video. Thanks for sharing. Love your tats. 😀

Extremely helpful! I was about to give up on this thing. I really appreciate you taking the time to create this tutorial.

This is amazing! Thank you! Thank you!!

Thanks so much. This was so helpful. I have been looking for something like this since I bought mine. One problem I have is that the translucent cover/cap does not want to come off the brush head. I am hesitant to push it too hard for fear of breaking it.

My plaice part does not just pull off of brush attachment! How do you do it?

Many thanks...we needed your video....got the original black one, still works great, have 2 sussex cockers, so it gets used lots, we even stick in the back of the car for holidays, incase accident in hotel 😮😮

Thank you so much!

Completely off topic, but would you do a quick video showing how you styled your hair in such a cute loose bun, please? It looks like it would be comfortable to wear like that!

This was great, thanks...I wish the clear plastic part came off on my machine's vacuum head, it's driving me nuts😅but your video helped w everything else. God Bless you all 🙏🏼💖

Tysm for This !!! My little work horse is good as new. 🥰🥰🥰

How do you get the stupid clear part on the head?

Brilliant.

Thank you so much for introducing the organiser. The video is so helpful! I have no idea how to use it before watching your video. :)

After reading through more comments I realize I must have a different model because clearly I’m not the only one with this problem! Thanks so much for a great video.

Your video was great. I have one problem, though. The clear plastic cover on the brush does not come off my machine, no matter what I do. Perhaps I have a different model? Any ideas would be greatly appreciated. Thank you!

Thanks m8! I r8 8/8

Thank you for this. What is ditto?

youre a legend for this-

So helpful thanks very much