Hello! Yes, the Lark M2's (camera version) are compatible with the Insta360 X4, but an adapter is required to allow for the 3.5mm in.
@CarlSmith737Ай бұрын
💙
@AtlasIEDАй бұрын
Excellent points, Brian! Thanks, Markertek for the video!
@antiWhiteism777Ай бұрын
@markertek --- Is 1 MHz good? I've heard 10 MHz advertised recently. What is the name for the port used to connect clocks to transports and DACs?
@Battle2011Ай бұрын
Canare prefers to sell certifications that smpte connectors outside of that are a problem to buy from them, I do not recommend them!!!
@fkmobile1Ай бұрын
Hello. Does it work with the Panasonic UE160 PTZ, and Blackmagic 2110 devices?
@kennethmajlandАй бұрын
Thanks for informative and good entertainment. Nc3fxx-bag is silver and nc3fxx-b is gold, with a price difference of less than a dollar. Is silver here preferable?
@markertekАй бұрын
Hello! The gold is a better conductor, so we have customers who prefer them as a quality upgrade. However, folks tend to choose the -BAG line when they are okay with the standard plating, but still want the look of the black connector. Hope that helps!
@jesuschrist1501Ай бұрын
i still don't know wtf this does, does it allow multiple camera to wireless connect to it or something and have a multicam setup that is realtime?
@DavesFitLife2 ай бұрын
Can the delay be adjusted? In other words does it have to be a minute? Can it be 10 seconds?
@RoadJournal2 ай бұрын
where's the dante port
@abc456f2 ай бұрын
I mostly have no idea what he's talking about but it sounds wicked cool.
@damirvukelic808711 күн бұрын
Why would you watch a video on pro audio equipment if you don't do music production?
@abc456f11 күн бұрын
@damirvukelic8087 I do recording in my home and the topic interests me. Do I have to be a race car driver to be interested in NASCAR? What a silly comment to make.
@damirvukelic808711 күн бұрын
@@abc456f not really good comparison. If nascar was music, then watching nascar would be the same as listening to music. However, producing music would be something much more involving in nascar, as engineering cars, making race strategies etc...
@ReinerDamisch2 ай бұрын
Sadly room eq and delay is not implemented on the FF802 FS ...yet
@omar_rawdah2 ай бұрын
hi does the v2 probe vm-3000 01 work with an exfo otdr type max 730 ?
@weAreNotAloneHere2 ай бұрын
Went to a club at the beginning, then released i was looking into cable drums
@laurencefornari3 ай бұрын
👏
@LPreplicant.4 ай бұрын
I want to learn more.
@LPreplicant.4 ай бұрын
I want it
@mo2zumarraga7914 ай бұрын
Odelsheas
@michaelrobinson96435 ай бұрын
Producing an RCA to XLR version. Usually for shielded unbalanced cable I would terminate the shield at the source only. For the RCA to XLR (eg minidsp to Amplifier) Would the Shield and Cold be combined on the outer ring, with hot on the centre pin; XLR being as normal with shield on pin1, hot and cold on 2 & 3?
@markertek2 ай бұрын
Hello! Correct. Our standard for an RCA to XLR would have the cold and shield combined on the sleeve on the RCA side with the hot on the tip.
@colleyguitars5 ай бұрын
What is the name of the jacket strippers you are using?
@markertek4 ай бұрын
Hello! They are Klein Tools 11045 Solid Wire Strippers. You can find them here: bit.ly/3Twrnnu
@victoryvisiontour5 ай бұрын
The video says PIN 2 White, PIN3 Blue. I just now took a new pre-made cable out the package (same cable as the video - Mogami Neglex 2534). It has PIN2 Blue, PIN3 White. I realize it doesn't matter as long as both male and female ends are the same. Just thought I would mention this to relieve any confusion viewers might have. Great detailed video. Thanks.
@moolieboy5 ай бұрын
Frist!
@moolieboy5 ай бұрын
Stahp!!! I can only get so Hard!
@Reedith8 ай бұрын
It would be immensely helpful if you named the model numbers of the cases shown in the video.
@AmericanMusicAndSound8 ай бұрын
🙌🙌🙌
@lilmikemikesix8 ай бұрын
He speaks normal English in x1.25 speed. Thank me later!
@VowNix6 ай бұрын
lol thank you!! First thing I noticed, "well this video is gonna take a while" haha
@mrbigg72558 ай бұрын
Great video
@markertek7 ай бұрын
Thanks!
@Loliconman8 ай бұрын
Where am i?
@jeffersonpichinte39108 ай бұрын
Thank you for the interview!
@markertek8 ай бұрын
Thank you!
@westonhuffman79088 ай бұрын
Well, This one doesn't have a detachable handheld microphone and this one doesn't have a shoulder strap.
@G5Hohn8 ай бұрын
For best results, do not transport solder on a hot iron, as the flux will burn off in transport. If you’re going to do this, flux the twisted wire to account for the burn off and let the fluxed wires suck the hot solder off the iron tip (via capillary action). Use small diameter (0.020 or less) solder so you’ll have good control over the solder metering as the amount of solder is a critical thing to control. Also, be sure you use a tiny glob of solder as a thermal bridge to the cups so you can use low (600F) tip temps and still get effective heat transfer and get an and off in 2 seconds.
@mediasatsng68898 ай бұрын
Its a pity Zylight won't return my messages, I have 6 of these lights and would like to order a replacement part, but they never reply...!
@jasonalexander64178 ай бұрын
is the AVMATRIX a good alternative to the blackmagic design converters?
@markertek8 ай бұрын
Hello! The feedback I've received on the AVMATRIX line has been positive. However, I have not heard about any specific in-use comparison to BMD. That would be interesting.
@darkstar2189 ай бұрын
Let's just say for giggles, you're just a guitar player and not an electrical engineer. And you have no idea how to read the Jack vs. Speakon vs. Phono LED Pin Indicators. You just want to know if your cables are good or bad. Is there a simple translation of what we should be looking for when we plug in different cables to the box and start turning the 6 way knob?
@markertek8 ай бұрын
Hello! Here's a link to the owner's manual for some clarification. bit.ly/3SjG4Kp
@helloitsmehb9 ай бұрын
Will this allow you to do line counts in the waveform?
@markertek8 ай бұрын
Hello! Yes, you would use line select to count active lines.
@AxelMontaner9 ай бұрын
XLR test: switch to 3. Green and red 3 on and red 1. Switch to 1 Green and red 1 and red 3??? What does that mean?
@mrmikejones9 ай бұрын
Can I use other NVME sticks, or does this only work with the Kiloview Storage Kit?
@markertek9 ай бұрын
Hello! The design of the NVMe module on CUBE R1 can adapt to all the SSD types on the market.
@kidonthebeat76699 ай бұрын
this mic stand is ok kinda overpriced didnt last very long before breaking the arm hub broke looked it up their know for breaking called customer service they are terrible customer support wouldnt recomend to buy the arm hub broke off almost dropping my microphone
@lorenzowhite88389 ай бұрын
Nice!!!!!
@lorenzowhite88389 ай бұрын
Alicia that was great!!!!
@asmr677310 ай бұрын
Can i use the 2549 (trs) on a synthesizer (balanced outputs)????
@asmr677310 ай бұрын
Can i use the 2549 (trs) on a synthesizer (balanced outputs)????
@v3zMedia9 ай бұрын
Yes it's actually probably the best option for that.
@asmr67739 ай бұрын
@@v3zMedia thanks
@CM-dw3gh6 ай бұрын
@@v3zMediaive bought a short 2549 RCA for inbetween my power amp and integrated. Hopefully this is ok?
@valdastomkus235310 ай бұрын
in 2023 paying 15k for micro USB.
@ThisHandleIsInteresting11 ай бұрын
Is it possible to record straight to the SKP 3 and save files from there as opposed to the additional extension to a phone or preamp?
@jonathanbutzke4324 Жыл бұрын
How do you get the signal out of the wifi to the switcher????
@markertek Жыл бұрын
Hello! The signal from the camera is sent to a switcher via cabled outouts on the camera. The wifi interface is for remote camera control - pan, tilt, zoom and monitoring. Hope this helps!
@Elpuchungosexy11 ай бұрын
Or can i use a Birddog Mini encoder to input to my switcher?
@markertek11 ай бұрын
Hello! Yes you can.@@Elpuchungosexy
@sabrinoor7 ай бұрын
@@markertek doesn't it also send NDI HX3 over wifi?
@markertek7 ай бұрын
Hello! Sorry for any confusion - yes it does.@@sabrinoor
@alexgarcialeal Жыл бұрын
Excellent! I have two questions: For Studio-Use Microphone Cables, controlled environment, 2 to 5 meters long: Question 1: I have a lot of 2534 and wonder how bad idea would it be not to join/twist the end pairs, using only one of each and leaving a Live and a Return unused. Maybe join both of them to the X shield?. This in order to avoid long run High Cut Filtering and still put the cable in use. Maybe achieving a sound closer to the 2549? Would this cause any problem? Question 2: Which Neutrik Connector? NC3XX - 1) Nickel VS 2) NC3XX-B VS 3) NC3XX-BAG. I understand the the 1st to be nickel housed with silver connectors, the 2nd to be black chrome housed with gold connectors, and the 3rd to be black chrome housed with silver connectors. Thx!
@markertek Жыл бұрын
Hello! I'll answer the 2nd question first since there's a more straightforward answer. The folks I talked to at Neutrik confirmed that XX connector material choices are an environmental visual preference. We use the NC3XX series for our standard assemblies. Some people like the look of the black, especially if they are trying to hide them onstage or on camera. As far as the gold contacts, gold conducts better than nickel, so there is a slight upgrade in the gold plating. However, gold is also softer so overtime is more prone to wear. For the 1st question, the engineers I talked with did not see there being a problem with doing what you are suggesting but were not sure if there is any advantage other than perhaps changing the 'color' of the sound as you suggest to the 2549. Give it a try and let us know!
@michaelrobinson96435 ай бұрын
Alex, do you have a concern that increasing the wire gauge by doubling the conductors for pin 2/3 will alter the sound or the gain required for a cable? "Loudness" is not linear across frequency so I am intrigued by your question and how the different cables may influence your system. Do be aware that wires left in place with no connection can still influence magnetic fields ... so I wonder if you would be increasing or not affecting the noise rejection capability of your cables in real terms. Being mindful the core reason for 4 core is to have 2 twisted pairs which by orientation will reject induced magnetic fields or electrical noise from perpendicular wiring (with its incumbent magnetic field). I'm interested in hearing what you ended up doing and your experience with the outcome if you have time to reply to my remarks :D
@samjarrell4383 Жыл бұрын
Where can you buy this at and how much
@markertek Жыл бұрын
Hello! Unfortunately, we are currently not offering our production trailers or accessories.
@DrummerJacob Жыл бұрын
Is there a way to monitor my desktop audio through the mixer? In other words, take the sound from my computer and send it to input of the USB connection so I can control it on the mixer?
@lectrosonics Жыл бұрын
Thanks again for visiting us at the AES show in NY!